... Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 24". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 6-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Handle (e46VV) sold separately Specs: Lift: 24" Support capacity: 2,500 lbs Quantity: 1 jack Limited lifetime warranty
Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…
Yes, if you're needing a replacement remote then the Replacement Touchscreen Remote w/ Charger #LC358601 will work with your LCI 18570 board. We have confirmed this with Lippert.
Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…
Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…
Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…
I checked the Spring Loaded Pull Pins #RVLG-SPP, #LG-119113 and #UF17-943031 that we have that are designed to replace those that are on your Lippert landing gear with the 3/8" pins and they all measured at 2-5/8" long from the mounting…
The Ultra-Fab Spring-Loaded Quick Pins for Landing Gear Drop Legs - 3/8" Diameter - Qty 2 #UF17-943031 is the replacement you are seeking for your landing gear. These spring loaded pins work great to give you easy operation of your drop leg…
I sure can Alan. It looks like your Atwood Wedgewood Vision 3-burner stove measures roughly 21-1/4?W x 22-5/16?H x 22-3/8?D and runs off of propane. The Furrion Propane RV Range with Glass Cover item #FR97KR is going to be our most comparable…
Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…
Hey William, yeah the Ultra Fab landing gear jacks part #UF17-943010 are a really nice landing gear option but the only thing is the mounting brackets are a little different than most so worst case scenario you might have to have them moved on your…
We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…
There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 6-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Handle (e46VV) sold separately Specs: Lift: 24" Support capacity: 7,500 lbs Quantity: 1 jack Limited lifetime warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailer Stabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. ... Beyond that height, the stabilizer does not have a weight capacity rating. Always be sure to raise the jacks equally to avoid bending or twisting your camper's frame, or putting uneven weight on any one the stabilizer legs.
Minimize chassis movement in your travel trailer with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 24" 12 Month warranty
Minimize chassis movement in your fifth-wheel RV with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper or trailer Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 30" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.Features: Cross braces permanently attach to your scissor jacks to reduce your RV's movement while parked Braces extend and retract with scissor jacks for easy setup and storage Included tension handle lets you adjust the braces for maximum stability Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Tube dimensions: Fully retracted: 69" long x 1" wide Fully extended: 78" long x 1" wide Weight: 20 lbs 1-Year limited warranty Notes: Bolts securing the footplate and mounting plate to jack must be 3/8" in diameter.
... The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Specs: Height: Collapsed: 4-1/4" Extended: 30" Lift: 30" Collapsed length: 32-1/2" Mounting base diameter: 9" Bolt hole diameter: 3/8" Load capacity: 5,000 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Power StabilizerJacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizerjacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 33" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Minimize chassis movement in your fifth-wheel RV with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
... The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Crank handle sold separately Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 5,000 lbs Maximum capacity at 22" extension: 6,500 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Tired of cranking your stabilizers by hand? This double leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quick stabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: double leg kit Weight capacity: 500 lbs per leg Item weight: 18.9 lbs 1-Year warranty
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quick stabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: single leg kit Weight capacity: 500 lbs 1-Year warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 24" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Filters
