Can I Flat tow The 2024 Chevy Blazer?

Yes! The Chevy Blazer is one of the easier cars to flat tow, but there are a few caveats that you have to consider.

Chevrolet recommends that you run your vehicle each day and at RV fuel stops in order to ensure proper lubrication of the transmission. This extra precaution may be a bit of a hassle, but the setup process is particularly simple to accommodate for it. Lets take a look at the steps:

Line your Blazer up on an even, level surface and attach it to the towing vehicle
Shift your transmission into N (Neutral)
While still in neutral, shut your engine off. This will leave the vehicle in accessory mode
Disconnect the negative terminal from your battery (this is the black post), and cover the exposed post in a non-conductive material such as duct tape.
Close your hood, and you're ready to go!

Simple right? It gets even better, all you have to do to disconnect is shift your vehicle into P (Park), disconnect the vehicle from your RV, reconnect the battery post, and let the engine run for 5-10 minutes before you drive it to allow for proper lubrication. The setup/breakdown process really doesn't get much simpler than this.

There are some serious pros and cons here, if you're the type of person that doesn't mind the extra "chore" of running your car at rest stops and at the start of your day, then this is easily one of the most convenient flat-towable vehicles out there. But if you want to "set it and forget it" then the Chevy Blazer is likely not the best option for you. Either way, make sure you follow the monitoring regimen laid out in the owner's manual if you want to avoid transmission damage. Stay safe and happy towing!