If you have only a 4-way flat on your vehicle and want to install a brake controller that pulls power from a 7-way trailer connector instead of wiring directly into your vehicle, this kit will adapt your plug for use with your brake controller.Features: Kit allows you to use a trailer brake controller that pulls power from your trailer connector instead of wiring into your vehicle Great for use with Tekonsha ProdigyRF (90250), Autowbrake (3430001), and Curt Echo (C51180) trailer brake controllers Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle (20') 12-Gauge wire lets you run power from your vehicle's battery to the trailer connector General Purpose Thermo-Plastic (GPT) insulation is highly resistant to acids, gasoline, oil, grease and most industrial solvents Heavy-duty, 40-amp circuit breaker protects your vehicle's electrical system by preventing overload Installation hardware included Ring terminals for battery and breaker hookup Self-tapping screws for attaching circuit breaker and ground Zip-ties for securing loose wires Note: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer application guide can be used to find the easy-to-install connector made specifically for your vehicle.
Change this light strip's pattern and brightness depending on your needs with the included wireless RF remote control. Weatherproof light strip can be cut to fit anywhere you need it - your RV cargo compartment, bedroom closet, or boat.And because the light has weatherproof, flexible silicone construction, it'll work well even if it's gathering dust in a closet or out in light rain by your RV steps. Wireless RF Remote Control This light strip comes with a wireless RF remote control that lets you operate the 8 light pattern, 10 brightness, and 10 speed options.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
Hey Walter, I checked with Curt and the RVI Series 4 part #RVI44FR that you referenced showing a Code 4 is related to exposure to cold weather and it's causing some circuit board issues. The solution is to let it sit indoors to warm up for 15 to…
Hi Bob! We can definitely get you a proportional brake controller that will plug right into your 2023 Honda Ridgeline. Just be aware, the two I have listed below do require you to have the factory towing package. First is the Tekonsha Prodigy P3…
Hey Clint, the Curt TriFlex NEXT part #C85MV that you referenced is the correct brake controller and install harness for your 2022 Ford E-Series Cutaway. Just because you didn't find the correct connector in your RV in the same spot doesn't…
Hi Steven, Thanks for the purchase and we do have the right harness for your 2025 Ram 1500 and the Redarc Liberty Brake Controller #RED24FR. The correct plug-in harness is the following part: - Redarc Plug-and-Play Wiring Harness #331-TPH-020 You can…
When we spoke with our contact at Curt they said the only time they've heard of the Curt T-Connector #C86CR having issues is when one of the pins was loose on one of the connectors. They replaced the kit for the 2023 Mazda CX-30 and everything…
We've had overall incredible results so far with the Curt Echo Mobile Brake controller part #C51180. We've sold quite a few and haven't really had any negative feedback to report. I'd be shocked if you had an issue, and in the…
The Tekonsha Prodigy P3 Trailer Brake Controller #90195 will work on your 2001 Toyota 4Runner. Since your 4Runner did not come installed with a factory 7-way connector you will need one to complete the install. If you do not have a 4-way connector…
I spoke with my contact at Convert-A-Ball and was told that you should try to use a brass punch initially. If the Pin in the Interchangeable Ball Set, #900B, will not move with the brass punch you will need to attempt to use a harder steel punch.…
I think in an absolutely ideal world you'd have two brake controllers so that you could set the max braking pressure individually but in reality that would be really involved to pull off and you'd get solid results with just a single brake…
Hey Dave, in a situation like this your best option would be a brake controller that has multiple trailer presets so you can pick quickly switch between the two settings your two trailers require. For that you would want the Prodigy P3 part #90195…
Thanks for the picture! I just spoke with my rep at Thule his solution was to replace it because the spring and the locking mechanism has gone out. They do not offer just the locking pin portion because it is riveted onto the frame. Instead you will…
The chain hangar brackets on the Reese Strait-Line Weight Distribution System, part #RP66082 will attach to the frame at approximately 30 inches from the center of the trailer coupler to the center of the brackets. These brackets do install over the…
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points beneath vehicle Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port near the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Running/tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear of your vehicle.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points behind tail lights Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
5-5/16" x 3-7/16" Rectangle LED trailer tail light functions as a stop, tail, and turn signal light. Sealed lens and housing meets IP67 ingress protection level. Recessed mount with built-in flange. Connection accepts AMP plug (417-49).
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Adapter is wired for: 1995-2009 Dodge Ram 1500/2500/3500, Full Size, all models 1997-2011 Dodge Dakota Pickup w/Factory Tow Package 1998-2009 Dodge Durango w/Factory Tow Package 2007-2009 Chrysler Aspen w/Factory Tow Package Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into the built-in harness in your cargo area and then route it up to your dash so you can plug in your brake controller.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Length: 19-1/2' Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electric brake controller you need to connect the wiring of the controller to your vehicle.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter For most applications, the factory plug is located beneath the dash, near the center console.
Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.
Filters
