Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.
Features:
Specs:
Manufacturer Cross Reference
Reflector will work as an exact replacement for:
Uni Bond # RF2421R
Truck Lite # 98032R3
Grote # 41032
Peterson # B480R
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics Oblong Trailer Reflector. These adhesive-back reflectors offer a screw mount. For red part number is RE11RB, and for amber, part number is RE11AB. Now, the oblong reflectors are the perfect solution to either replace old reflectors on your trailer or increase visibility on your current trailer. This trailer is probably 15 or 20 years old. These have been on here the whole time. You can see they just lose their reflective property causing us to have less safety as we travel down the road because we're not nearly as visible.
Also, while they're sitting around the yard and things like that when headlights hit them, it's nice that they shine, so that way people will know where the trailer's located. Now, here's the same illustration with the red. You'll see the older one here. It's not nearly as bad as the one on the front was. It still has a little bit of reflective property to it, but the new one really shines much brighter. Not only does this make the trailer more visible, but it makes a lot nicer when we've got the nice new looking clear lens reflectors there. Now, to remove old ones, you'll need to either ...
you can see these have been riveted in place with aluminum rivets. You'll either drill these out, or if it's screwed in place you can remove the screws. Now, we recommend using aluminum rivets or a stainless steel or an aluminum screw. That way, you don't have any rusting just eventually run down your trailer. We'll get these drilled out now.
Now, these do have that adhesive backing, so you're probably going to need a screwdriver. Going to get in there and pry those off. Once we have those removed we want to clean off any of the residue that's hanging out still from the old adhesive. Once we have that cleaned up, we're going to prep it with a little bit of rubbing alcohol, and then if you need to, touch up the paint a little bit. We'll let that dry while we take off the one on the back side there. Again, we said we're going to be using rivets here to take care of our reflectors.
I'm going to poke the holes through where I want my rivets to come through. Pull back our adhesive. Then, I like to place either my rivets or screws, whatever I'm going to use, in and use these as guides to line it up with my hole. I'm going to push that on there so it gets good adhesion. Then, we'll get them riveted in place or screwed in place, and do the same for our red one on the back side of the fender. That'll complete our look at the Optronics Oblong Reflectors available in red or amber.
Average Customer Rating: 4.9 out of 5 stars (68 Customer Reviews)
4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.every item i ordered was excellent, as described and as ordered. service was very good as was delivery.
These are being used to cover up where real lights use to be on my camper. They're just perfect with a snug fit.
Product came in, in a reasonable time frame and will work very well to help eluminate the tail end of my motorcycle.
Its a perfect match to to others on my trailer.
Trailer is now finished!
All the part I got from e trailers worked great and look at this beauty
Quick processing time.
This product works very nicely for our 1969 Go TAg Along trailer. The adhesive backing holds well, and this trailer is exposed to the elements at all times. Am very pleased with the oblong reflectors. Also purchased a tire mount for the rear bumper. Am also pleased with its performance!
Great product, put fenders on a cargo trailer, worked perfectly, added a professional look, high quality material, easy installation, I recommend highly
It is difficult to get enthusiastic about hazard (marker) reflectors, but it is easy to appreciate a company that provides an accurate description, a fair price, quick delivery and a quality product.
The bump step was just what I was looking for, and more.
Good product quality. Mounting holes registered with degenerated reflectors on trailer, no new holes to drill
Prompt service and shipping on time
Excellent replacement reflectors and easy to screw on or use of adhesive supplied.
Like the size and shape. Also like the pre-formed mounting holes allowing use of screws for a more secure mount if desired.
I plan to mount these on a new trailer I just put together and they will look great on my the walls of it.
This was a great replacement for my trailer, it was perfect and fit in the place of my old missing one
Great Product, Great Service, Lightning Fast Shipping !!! Thanks, Mike Ballard
Perfect replacement for my broken refle ctors.
They fit perfect over the hole of old clearance lights
Can't beat the price for a very good re flector
I have always received quality products and timely shipping. I have been a customer since 2014
Great price Always a pleasure dealing with etrailer.
perfect match to my other reflector. very pleased.
Direct replacement. Old one were 10 years old and needed to be replaced.
simple way to make small trailer safe
Great reflector! Beautiful!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
12/19/2018
Used on the back gate of my trailer. I really just bought it to get my order total over $50 to get free shipping. It worked!