bing tracking image
  1. Ski and Snowboard Racks
  2. Inno
  3. Roof Rack
  4. 2 Snowboards
  5. 3 Pairs of Skis
  6. Aero Bars
  7. Elliptical Bars
  8. Factory Bars
  9. Round Bars
  10. Square Bars
Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 3 Pairs of Fat Skis or 2 Boards
Inno

Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 3 Pairs of Fat Skis or 2 Boards

Part Number: INA952
In Stock
$191.60
Ski and Snowboard Racks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This locking carrier lets you transport 3 fat skis or 2 snowboards on your roof rack crossbars. Cradles click as they are closed to ensure skis are secure. Memory Mount system makes the carrier easy to install and remove. Great Prices for the best ski and snowboard racks from Inno. Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 3 Pairs of Fat Skis or 2 Boards part number INA952 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (17)
  • Q & A (0)
  • Photos

Inno Ski and Snowboard Racks - INA952

  • Roof Rack
  • 2 Snowboards
  • 3 Pairs of Skis
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Inno
  • Clamp-On
  • 14-5/8 Inch Long
  • Fixed Height
  • Board/Ski Lock
  • Fixed

This locking carrier lets you transport 3 fat skis or 2 snowboards on your roof rack crossbars. Cradles click as they are closed to ensure skis are secure. Memory Mount system makes the carrier easy to install and remove.


Features:

  • Roof-mounted carrier lets you transport 3 fat skis or 2 snowboards on your crossbars
  • Large push buttons let you easily open carrier even while wearing gloves
  • Audible indicators ensure your cargo is secure in the cradles
    • For thick skis, press cradles closed until they click once
    • For thin skis, press cradles closed until they click twice
  • Soft padding protects your cargo during transport
  • Locking covers secure your gear to the carrier
  • Memory Mount hardware offers easy, tool-free installation with no adapters required
    • Set carrier on crossbars, tighten clamps, and close levers
    • Clamps "remember" your crossbars after initial setup - no further adjustment needed
  • Constructed of durable plastic and rustproof aluminum


Specs:

  • Carrying capacity: 3 fat skis or 2 snowboards
  • Application: round, square, aero, elliptical, and most factory crossbars
  • Recommended crossbar spread: 29-1/2"
  • Maximum thickness of stacked skis or snowboards: 2"
  • Usable interior pad length: 14-5/8"
  • Overall dimensions: 21-7/8" long x 7-1/4" tall
  • Carrier weight: 10 lbs
  • Limited lifetime warranty


Note: Skis and snowboards may need to be stacked base-to-base depending on their width.

INA952 Inno Gravity Ski and Snowboard Carrier - Roof Mount - Locking - 3 Fat Skis or 2 Snowboards





Ratings & Reviews

4.7

17 reviews
This locking carrier lets you transport 3 fat skis or 2 snowboards on your roof rack crossbars. Cradles click as they are closed to ensure skis are secure. Memory Mount system makes the carrier easy to install and remove.

by:



by:



by:

Easy to install, great price, great service. Thank you!



by:

Excellent, easy to use product. Once you set them, they are easy to take on and off and don't need readjustment. They lock and have been secure. Have owned for a year and used them last ski season and for the beginning of this one (already been up once this year.)



by:

I got to use it a handful of times before coronavirus ruined the season but the rack was great every time. It was easy to install and remove and I don't remember it making any significant noise during the drives.
If I had to buy a rack for a second car, I would buy this same one again.



by:

Worked out great. Love the ease of installation and the quality of the product. I was able to fit 2 snowboards and 1 junior skis without staking. It does cause some wind noise at 65+ mph, but that's to be expected.



by:

Everything is great except the hold down bolt or nut is stripped that holds the crossbar down. Other then that all was smooth



by:

Super easy to install. Very little wind noise.



by:

Great product! I would buy it again



by:

Easy to install. Works fine with my 2017 CR-V factory crossbars even though they are only 20mm thick. Quick removal when not needed.



by:

I love my new roof rack along with the ski/snowboard carrier! I have been using it a lot since I received it and it works perfectly!! I received all of my items when they said I would and everything was packaged very well. Would definitely order again from etrailer!!



by:

Upgraded to these last year from a set of an old set of Thules that did it's job for over a decade mounted all-seasons. Fear of the old mounting plastic from cracking.. decided it was time for an upgrade.
Found these online with great reviews. Do not regret! The mounting system is genius & product is very well made! Being able to load/unload from both sides of vehicle means less work for me.. LOL



by:

Easy to setup. Installing and removing is very easy.



by:

Great product, can fit 2 pairs of wide powder skis and poles in easily. No issues, left the carrier on year round



by:

Great ski rack! Well made and an easy installation.



by:

These work great! easy install and easy to operate with big gloves.



by:


17
17

See what our Experts say about this Inno Ski and Snowboard Racks

  • Recommended Fairing for a 2019 Toyota RAV4 Hybrid
    Yes, it will Jerry and thanks for the pics. The 40" long Yakima WindShield Fairing item # Y05017 will indeed work with your current setup. It's going to attach directly to your flush bars, with the included clamps and sit between your RAV-4's roof and the bottom of your cargo box. The 40" width is the perfect size as well. The item # Y05017 will help with the air going between your roof and the cargo box by pushing it to the sides. However, you may get a whistling sound because you're...
    view full answer...
  • Aero Bar Roof Rack Recommendation for 2011 Lincoln MKZ
    For an aero bar roof rack that is available for your 2011 Lincoln MKZ that rivals the quality of Yakima racks and is priced better I would highly recommend the Inno Aero Bar roof rack part numbers # INXB123-130, # INXS250, and # INK546. This would be your best option for a rack that's ready to go!
    view full answer...
  • Can Inno Gravity Ski Carrier be Separated into Two Smaller Carriers
    The Inno Gravity Ski Carrier part # INA951 that you referenced was not designed to separate into two smaller racks and it can only be used as a complete unit. For a smaller version of this you would want the part # INA952.
    view full answer...
  • Will The Inno Ski and Snoboard Roof Rack Work With A 2023 Volvo V60?
    The Inno Ski and Snowboard Roof Rack - Dual Angle - Locking # INTX726 just needs roof rails or fixed mounting points to attach and from what I could find, it looks like your vehicle came equipped with factory flush rails so this should work fine, however I recommend verifying that you have the same connection style first. If not, you can use the Inno Gravity Ski and Snowboard Carrier - Clamp On # INA952 which will clamp onto round, square, aero, elliptical, and most factory crossbars.
    view full answer...
  • What Is the Largest Diameter Round or Square Crossbar the Inno Gravity Ski Carrier Will Fit
    Yes. We've previously determined through Inno that the Inno Gravity Ski and Snowboard Carrier # INA952 will fit on square crossbars up to 2" x 2", so it will also fit on round roof crossbars with a 1-1/2" or 1-3/4" diameter.
    view full answer...
  • Inno Roof Rack that Fits 2018 Mercedes Benz GLA 250
    To install an Inno square bar roof rack on your 2018 Mercedes Benz GLA 250 the correct components are part numbers # INB117, # INXP, and # INTR162 which does attach to the flush rails on the roof of your vehicle. Then you could install the Inno Gravity Ski Carrier part # INA951 for a 6 ski rack or part # INA952 for 3 skis.
    view full answer...
  • Will Inno Gravity Ski and Snowboard Carrier Fit Thule AeroBlade T-Slot
    Yes the Inno Gravity Ski and Snowboard Carrier # INA952 will fit the Thule AeroBlade Load Bars THARB53 that you just bought! The accompanying photo shows the dimensions of T-slot that the Inno Gravity # INA952 fits and these dimensions are right in line with the size of the T-slots on the AeroBlade bars.
    view full answer...
    Image 1 for
  • Fitting the Inno Gravity Ski and Snowboard Carrier on 1.25" x 1.25" Square Bars
    I called Inno, and they confirmed that the Gravity Ski and Snowboard Carrier, part # INA952, will fit on your 1-1/4" x 1-1/4" square crossbars with no problem. They did not have an exact maximum, but they said they it could fit up to 2" x 2" square crossbars. I've linked to a video review of this carrier for you to look at.
    view full answer...
  • What is the Best-for-the-Price Roof Rack and Ski Carrier for My 2021 Hyundai Kona?
    The best economical roof rack for your 2021 Hyundai Kona depends on whether your vehicle has a bare roof or flush factory rails. If your Kona has a bare roof, I recommend the following setup: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06131 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - Yakima Same-Key Lock Cores #...
    view full answer...
  • Could Inno Gravity Ski/Board Carrier Carry 2 Pairs of Skis and Snowboard
    With the Inno Gravity carrier part # INA952 we were able to put one pair of skis and one snowboard on it pretty easily. This is due to it's usable pad length of 14-5/8 inches. I don't believe you'd be able to fit two pairs of skis with a board you might measure the widths of what you have to check this. For something similar that does have the needed width you would want the Kuat Switch part # KU94FR and you'd be able to carry 2 pairs of skis and a board.
    view full answer...

Do you have a question about this Ski and Snowboard Rack?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Jacob H
Video by:
Jacob H
Employee Aidan B
Video by:
Aidan B
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Charles A
Video by:
Charles A
Employee Ethan H
Video by:
Ethan H
Employee Samuel H
Video by:
Samuel H
Employee Kyle M
Video by:
Kyle M
Employee Joshua U
Video by:
Joshua U
Employee Matthew G
Video by:
Matthew G
Employee Daniel D
Video by:
Daniel D
Employee Evan R
Video by:
Evan R
Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee John S
Video Edited:
John S
Employee Colin H
Test Fit:
Colin H
Employee Ed W
Test Fit:
Ed W
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Cooper S
Test Fit:
Cooper S
Employee Matthew B
Test Fit:
Matthew B
Employee Kurt W
Test Fit:
Kurt W
Employee Bruce K
Test Fit:
Bruce K
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Manda E
Updated by:
Manda E
Employee Hayden R
Installed by:
Hayden R
Employee Matthew S
Written by:
Matthew S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<