Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
While the Electric Trailer Brake Kit #AKEBRK-35-SA are self adjusting, they do still require an initial bedding of the brakes (breaking in/seating the brakes) to work properly. I have listed the steps to do this below. 1: Pick an open stretch of road…
view full answer...45 to 50 lbs is the recommended torque rating for the 4 bolts that hold 10 inch brake assemblies to a trailer like the part #AKEBRK-35L-SA.
view full answer...The Kodiak 12" Hub-and-Rotor Assembly #KHR12D that you referenced requires an inner bearing of #25580 and an outer bearing of #15123. For a set of brake pads you would want the part #K225CP.
view full answer...When replacing the disk brake rotors on your trailer it is recommended that you also replace your bearings, races and seals at the same time. This will ensure that all components are new and in good order and will prevent the need to dismantle your…
view full answer...We have two bearing kits that have the same bearing numbers you need. There is part #BK3-200 that uses the seal part 10-36 which has an inner diameter of 2.25 inches and then we have the part #BK3-210 that uses a seal with an inner diameter of 2.125…
view full answer...If your 2012 Dodge Ram 2500 came with a factory tow package that included a 7-Way at the back of the vehicle, you can use 5th wheel and gooseneck in-bed wiring harness, #50-97-410. This harness plugs in line with the factory wiring harness under the…
view full answer...The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…
view full answer...Yes, the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal #BK3-300 is exactly what you need for your 5,200 lb Dexter Axle on your Grand Design 5th wheel trailer.
view full answer...For the Lippert 5200 lb axle, the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal #BK3-300 or the Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal #BK3-310. The #BK#-300 is by far the most common and likely what you have. The difference is the…
view full answer...To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them. Or, you can measure the spindle where the bearings and seal ride so that we can pick you out the…
view full answer...Yes we do. Based on your seal measurement, you will want Bearing Kit #BK3-110. The seal included in this bearing kit measures 2.125 (2-1/8) inches. I have included a video review of this kit for you to check out.
view full answer...The Tru Ryde grease seals you mentioned, part #RG06-70 are indeed a replacement for the 10-036-00 Dexter seals. They would work great for your application.
view full answer...Related Searches
Filter Your Search
Contact and Help