Includes the components needed to repair the break away cable on your Dexter Axle A-60 brake actuator. Works with all Dexter Axle A-60 brake actuators.
Replaces the break away cable and lever for your Demco brake actuator.Features: Replaces the break away cable and lever for your Demco brake actuator Fits Demco models DA10, DA20, and DA91 Cable assembly length: 41" from the eyelet on the hook end to the center of the hole on the clevis end Made in the USA
The automotive-grade pads on these brakes offer lasting effectiveness. Both 7" x 1-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 10" to 13" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. ... These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. ... These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Hey Byron. The 24-7/8" Long 6-Leaf Double-Eye Spring item #e64SR is going to be the correct one so long as your leaf springs are or near 24-7/8" long from the center to center of the eye bolts. I can't identify the correct replacement…
Hey Greg, the MORryde CRE3000 Equalizer part #MR87ZR will work for you and will clear the block you have in your hanger. The distance above the top of the bushing on this equalizer is right at 1/2 inch which it looks like you have more than enough…
Hey David. Based off of wheel base the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers item #MR29DR is going to be the closest option. However, I recommend measuring one of your current equalizers so we can be sure this is the best fit. A…
Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…
I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…
Hello Chris, thanks for reaching out. We do have some leaf springs that may work on your 2015 Forest River XLR Hyper Lite Toy Hauler. There are a few things I want to confirm first though. First, I will need to know the weight capacity of each axle.…
Thank you for the pictures. The shackles should always be pointing up at about a 45 degree angle towards the axle. There is not a specific angle set in stone, but they should should make a "W" shape at all times. They appear to be…
Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs like…
Hey Robert, I'd be more than happy to help you find the correct leaf spring replacements for your 2017 Heartland Landmark 365 Oshkosh! According to my research your trailer should be equipped with 7K axles so the 6-Leaf Double-Eye Spring #e64SR…
We do not recommend moving from 7,000lb #e64SR to 8,000lb #DX74XR leaf springs as this creates a stiffer ride with more bounce. This causes more shock to transfer inside your RV which can cause damage to the trim and electronics. Instead I recommend…
I do see your 2019 Dutchmen Voltage 3615 uses 7,000lb axles. You will most likely use the 24-7/8" Long Leaf Spring #e64SR if your flattened springs are 26" long. We do have the 8,000lb Springs #DX74XR if you are looking for a spring less…
Generally you'll want to replace your equalizer and shackles with ones that have the same or similar dimensions. The equalizer in the #AP233 kit has a 2" tall and 5-3/4" long (eye bolt center to eye bolt center) and the shackles…
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. Made in the USA.With self-adjusting brakes, though, you'll always have peak stopping power - simple as that! As the brake pads wear over time, a tensioning cable will automatically keep the pads in alignment so they'll consistently make contact with your drum when you brake.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 4" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.Does the wheel now spin freely (even if it sounds like the brake pads drag slightly on the drum)? Great! Then you're all done with that one and ready to adjust the rest. How to Break In New Brakes After you get these brakes installed and adjusted, you'll need to break them in.
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.Does the wheel now spin freely (even if it sounds like the brake pads drag slightly on the drum)? Great! Then you're all done with that one and ready to adjust the rest. How to Break In New Brakes After you get these brakes installed and adjusted, you'll need to break them in.
Corrosion-resistant Dacromet electric drum brakes have automotive-grade brake pads. 12" x 2" Assemblies have automotive-grade brake pads. Fits 14-1/2" to 16-1/2" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. ... These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. ... These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. ... These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Hydraulic drum brakes offer more powerful, controlled, and smoother braking compared to electric brakes. 10" x 2-1/4" Assemblies have premium brake pads and e-coated backing plates. Fit 13" to 15" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
... Ideal for boat trailers near saltwater. 10" x 2-1/4" Assemblies have premium brake pads. Fit 13" to 15" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Brakes that automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 3-3/8" Assemblies fit 16" or larger wheels. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 5" Assemblies fit 16" or larger wheels. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
These brakes automatically adjust as you tow so you don't have to crawl on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 3-3/8" Assemblies fit 15" or larger wheels. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 4" Assemblies fit 16" or larger wheels. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 5" Assemblies fit 16" or larger wheels. Made in the USA.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Free-backing hydraulic drum brakes won't lock up when you back up, even if your actuator is engaged. 12" x 2" Assemblies have e-coated backing plates. Fit most 14-1/2" to 16-1/2" wheels.These pads are also tapered, which should help to prevent any broken, crumbly bits of material from rotating inside the drum as the pads wear over time.
Filters
