Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00  

Grand Design does a great job listing the parts for their trailers but the one thing they don't list individually is the leaf springs. I can see that you have 7k axles on your Momentum 320G but you will have to measure the length to see if…

Hey Bill, sorry to hear about all the trouble you're having but after looking at the pictures you sent in I'd have to agree with the tech. I think you're going to need to up your springs to a beefier set like the 7-Leaf…

Thank you for that detailed information and what I can tell you is that when choosing leaf springs, the actual number of leafs isn't the most important thing, the weight rating and center-eye to center-eye measurement is what you need to know. I…

For 7k axle leaf springs like what the Dexter axle part #8327860 you referenced is designed to fit you'd want the part #DX74XR which is for a 8k axle like what you almost have but would work great still even though it's a little more capacity…

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

Yes, a 24-7/8" leaf spring will work for your 2022 Dutchmen Voltage. If you took the #DX74XR and flattened it out it would measure 26-3/8" which is right in line with what you have. Assuming you have 8,000 lb axles on your toy hauler this…

Yes, the Dexter trailer leaf springs like the part #DX74XR are made in the USA.

We don't carry any 7k axle leaf springs at this time but we do have the 8k leaf spring part #DX74XR which is a 7-leaf spring that is 24-7/8 inches in length. If the length matches what you need this would work well for you even though it has a…

I checked directly with Dexter, and from what I saw they have a measurement - taken from center of spring eye to center of spring eye - of 24.8", which is the same as our 24-7/8" measurement for the 7-Leaf Double-Eye Spring for 8,000-lb…

In order to find the correct replacement leaf springs for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs…

Trailer leaf springs will measure differently when under load so its tough to get an accurate eye-to-eye dimension without removing the spring. Also, after years of use a leaf spring can stretch and actually lengthen by as much as 1/2 to 3/4-inch.…

Each of the leaves of the Leaf Spring part #e64SR that you referenced are 1/2 inch thick. Since there is a total of 6 leaves the overall thickness is 3 inches. If you include the bolt that runs through all of the leaves the overall thickness is 3-3/4…