Parts Needed to Replace Equalizer and Shackles and How to Determine Which Parts to Use
Published 03/26/2021
Products Featured in This Question
Question:
The old shackle strap measures 2-1/2" Old equalizer 7-3/4" at the two lower bolts
asked by: Chad L
Expert Reply:
Generally you'll want to replace your equalizer and shackles with ones that have the same or similar dimensions. The equalizer in the # AP233 kit has a 2" tall and 5-3/4" long (eye bolt center to eye bolt center) and the shackles included are 2-1/4" long. You might be able to make up the distance by just using some longer shackle straps like the Replacement Shackle Strap - 2-5/8" Long # 115052, which will give you an extra 3/8" of an inch.
If you can provide the length of the shackle straps you're replacing and the dimensions of the equalizer I'm happy to look and see what there is available that would be more appropriate for your trailer. We'll need to know the distance between the two side bolts on the equalizer and the center hole to center hole distance on the shackle straps. I've also linked a helpful article on trailer suspensions that gives some other great information.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Search Results: trailer jack
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: trailer safety chains
- Search Results: 3/8 inch diameter trailer safety chains
- Search Results: jack footplate
- Search Results: 1/2~20 lug nuts
- Search Results: foot plate
- Shop: Lippert 60-Degree Cone Trailer Wheel Lug Nut - 1/2"-20 - Qty 6
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Video: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Review
- Video: Terran Industries Trailer Suspension - Insider Insights
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Correct Dexter Heavy-Duty Suspension Kit for a 2002 Ranger Boat Trailer With 7-3/4" Equalizer
- Video: Review of Redline Trailer Suspension Parts - Suspension Bolts - 38-3TB
- Shop: Leaf Spring Center Tie Bolt with Nut, 3/8" x 3"
- Q&A: Difference Between Dexter Axle Heavy Duty Suspension Kits # K71-449-00 and # K71-359-00
- Q&A: Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
- Q&A: Availability Of Suspension Kit With 3-1/2" Long Shackle Links
- Q&A: Dexter Heavy Duty Greasable Shackle Kit Needed
- Q&A: Can Dexter Heavy-Duty Suspension Kit Replace 2-5/8" Shackles
- Q&A: Can Dexter Heavy Duty Suspension Kit K71-449-00 Replace Shackles that are 2-5/8 inches
- Video: Replacement Shackle Strap Feature Review
- Video: Review of Terran Industries Trailer Suspension Parts - Tandem-Axle Hanger Kit - TX45VJ
- Video: All About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
on Trailer Suspension Parts
Chad
3/26/2021
The old shackle strap measures 2-1/2" Old equalizer 7-3/4" at the two lower bolts