bing tracking image
Q & A Icon

Replacement 6 Leaf Leaf Spring for a Dexter 7,000 lbs Axle  

Updated 03/05/2026 | Published 02/27/2026

Question:

I need a 6 leaf spring for a 7000 lb Dexter axle 2842988. Is etrailer part e64SR the correct one? Thank you

0

Expert Reply:

Hey Byron. The 24-7/8" Long 6-Leaf Double-Eye Spring item # e64SR is going to be the correct one so long as your leaf springs are or near 24-7/8" long from the center to center of the eye bolts. I can't identify the correct replacement springs based on your pn 2842988. That just tells me you have a 7,000 lbs axle with a 8 on 6-1/2" bolt pattern and it's dimensions.

What you'll need to do is get the weight off of one side of your suspension and measure one of the leaf springs from the center to center of the mounting bolts. Leaf springs stretch out quite a bit over years of use so this is the only way to get an accurate measurement unless you can find a part number on one of those leaf springs.

I've attach a diagram below that will show you what to measure. You'll need the C measurement. If you'll put the measurement you get where it says Add Comment, I'll be able to confirm the item # e64SR is the correct one of find the one you'll need.

Please note that when you swap out your leaf springs, you'll also want to switch out your hardware as those suspension bolts are only meant to be torqued down once. You'll want to pick a kit with the closest size to your current shackle straps.

The MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR is for 2-1/4" shackles or item # MR76ZR is for 3-1/8" shackles. These kits come with the bronze bushings, wet bolts and shackle straps.

expert reply by:
0
Jerred H
e64SR
e64SR
(click to enlarge)
Jay W. profile picture

Jay W.

3/3/2026

These springs were the exact size for my 2020 349M.

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/3/2026

@JayW Thanks for the feedback Jay! Glad the springs were exactly what you needed.
Chris A. profile picture

Chris A.

3/3/2026

I bought these springs to fix a broken spring after I bought the trailer. I had to get the part number from Keystone to match up with this product, but the measurements are key. I would also recommend replacing all of them at once. I've had some strange tire ware, but I think it's because I replace one or two springs at a time.

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/3/2026

@ChrisA Thanks for the tip Chris! You are correct the strange tire wear is most likely due to not replacing all the springs at the same time. It's highly recommended to replace all your leaf springs at once.
Ed L. profile picture

Ed L.

3/3/2026

I put these springs on my 2017 Forest River Cardinal 3456RL. They worked fine.

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/5/2026

@EdL Happy to hear the springs worked out well for you. Thanks for leaving the feedback!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>