Use any 18-volt or 24-volt cordless drill (not included) to power this side-mountjack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Basically, by giving the jack a rougher "terrain," this finish helps keep the jack from aging too quickly. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment.
Black powder coated A-frame jack has a retracted height of 9-1/4" and an extended height of 24-1/4". The zinc-finished sidewind handle arm and internal gearbox make it as sleek as it is useful.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height from bottom of inner tube to bottom of bracket: 9-1/4" Retracted 24-1/4" Extended Travel: 15" Clearance: 14-1/2" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-5/8" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... On a standard drop leg jack, the release pin is tucked away under the trailer frame. The release pin on this jack is conveniently located right above the mount for easy access.
Ideal for the rigors of off-road towing, this fully articulating coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form a strong connection that is safe and secure, no matter the terrain. Bolts or welds to your A-frame trailer.Features: A-frame trailer coupler links with Lock 'N' Roll vehicle-side hitch (sold separately) to hook up your trailer to your tow vehicle Bolts or welds directly onto your A-frame trailer Provides attachment point for vehicle-side hitch More secure connection than with a traditional hitch ball Outer tabs on trailer-side coupler interlock with vehicle-side hitch to form a strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Head unit pivots side to side Full articulation when paired with vehicle-end hitch - setup pivots up and down and rotates 360 degrees Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Steel alloy construction is strong and durable Black paint finish resists corrosion Built-in jack attachment point allows for quick, easy mounting of round utility jack Meets SAE J684 towing safety regulations Made in the USA Specs: Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Jack hole diameter: 2-5/16" Limited lifetime warranty This coupler combines with a Lock 'N' Roll vehicle-end hitch (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.The removable handle might also deter would-be trailer thieves. After all, who wants to take a trailer if they can't get the jack to work? This jack has a pipe-mount style design, which means you pull a non-spring-loaded pin to release the jack so it can swing up or down.
Great for construction and agricultural trailers, this jack includes a heavy-duty, versatile mount that lets you easily install it and also keeps the jack up and out of the way when it's not in use.Features: Heavy-Duty Use: Built for trailers that tow construction equipment, agricultural machinery, and other heavy cargo Strong, Durable Mount: Innovative, heavy-duty bracket gives excellent support for a side-mountjack Bracket also makes it easy to remove the jack and remount it out of the way for travel Extended Lift: Drop leg pairs with the already substantial travel to get your trailer raised Strudy and Dependable: Solid steel construction Made in the USA and designed by US Military Veteran Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28" Screw travel: 15" Drop leg travel: 13" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Limited lifetime warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.The removable handle might also deter would-be trailer thieves. After all, who wants to take a trailer if they can't get the jack to work? This jack has a pipe-mount style design, which means you pull a non-spring-loaded pin to release the jack so it can swing up or down.
This Dutton-Lainson industrial side wind jack is a pipe mounted swivel style jack with a base foot.Features: Pipe-mounted swivel-style jack lifts the tongue of your trailer Wide base plate supports the nose of your trailer Includes weld-on mounting tube and detent pin Made in the USA Specs: Capacity: 2,000 lbs Travel: 11" Height: Retracted: 11-1/2" Extended: 22-1/2" Bracket height: 11-1/2" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson industrial side wind trailerjack has a 2,000 lb capacity. Matte black finish.Features: Capacity: 2,000 lbs Travel: 15" Overall height: 27" Bracket height: 15" Includes weld-on mounting tube and detent pin Matte black finish 3-Year limited warranty Made in the USA How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Backing a trailer into a gravel storage spot gets old when the jack drags or sinks. This swivel jack gives you 10" of lift with a wide footplate and sidewind crank, so you can raise, park, and stow the trailer without fighting the setup.Swivels Out of the Way for Transport Low-mountedjacks can create clearance problems on uneven driveways, gravel lots, or rough terrain. The tubular swivel design uses a 5/8" pull pin with lanyard, allowing the jack to reposition for use or stow alongside the trailer during transport.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Ideal for the rigors of off-road towing, this fully articulating coupler pairs with a vehicle-side Lock N Roll hitch (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain. Welds onto your A-frame trailer.Features: A-frame trailer coupler links with Lock 'N' Roll vehicle-side hitch (sold separately) to hook up your trailer to your tow vehicle Welds directly onto your A-frame trailer Provides attachment point for vehicle-side hitch More secure connection than with a traditional hitch ball Outer tabs on trailer-side coupler interlock with vehicle-side hitch to form a strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Head unit pivots side to side Full articulation when paired with vehicle-end hitch - setup pivots up and down and rotates 360 degrees Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Steel alloy construction is strong and durable Black paint finish on coupler head resists corrosion Raw steel A-frame body is ready for welding Built-in jack attachment point allows for quick, easy mounting of round utility jack Meets SAE J684 towing safety regulations Made in the USA Specs: Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Jack hole diameter: 2-5/16" Limited lifetime warranty This coupler combines with a Lock 'N' Roll vehicle-end hitch (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. ... But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mountjack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW).
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. ... Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting hardware Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 10-1/4" Extended: 25-1/4" Total lift: 28-1/2" Screw travel : 15" Drop leg travel : 13-1/2" Overall height (when retracted): 25-1/4" Footplate dimensions: 7" long x 4" wide 1-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Dutton-Lainson pipe mount swivel style top wind trailerjack with foot.Features: Capacity: 2,000 lbs Travel: 10" Overall height: 15-1/2" Bracket height: 11-1/4" Includes weld-on mounting tube and detent pin 3-Year limited warranty Made in the USA How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Dutton-Lainson pipe mounted swivel style top winding trailerjack with foot. Matte black finish.Features: Capacity: 2,000 lbs Travel: 15" Overall height: 15-1/2" Bracket height: 11-1/4" Includes weld-on mounting tube and detent pin Matte black finish 3-Year limited warranty Made in the USA How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. ... Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Total lift: 30" Screw travel : 15" Drop leg travel : 15" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailerjacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
This might be just what you need if you have clearance issues along your trailer frame that won't let you swing a jack up. Wheel swivels 360 degrees. Premium zinc finish with a 500-hour salt spray rating is ideal for boat trailers. ... Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Capacity: 1,000 lbs Bracket height: Retracted: 10" Extended: 25" Screw travel : 15" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel diameter: 6" 3-Year limited warranty Built for Setups that Make a Swivel Jack Impractical to Use Most boat trailerjacks are designed so that you can stow them parallel to your tongue when you're towing.
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Travel: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Filters
