Search: lugnut   >  

Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 #LHLR103 or 9/16"-18 #LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi Trevor, The Kenda Karrier ST205/75R15 Radial Tire w/ 15" Silver Galvstar Wheel #KE66JR does not come balanced though you can add balancing beads to the tire if you'd like. If you have a single axle trailer you can balance them…

The wheel size you have is a 16 inch diameter that is 7 inches wide which is not super common but we do have a coupler options like with the Aluminum Mod wheel part #LHJM513 that has a 3,750 lb or for a more interesting look we also have the…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…

Yes, Pat, the Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" #AM32NR wheel will fit with your 235/75-17.5 tire size. The last set of digits in the tire size indicate the wheel size that your tire is…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Yes, the mounting brackets included with the DeeMaxx Disc Brake Kit #DE72FR are also stainless steel.

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

Hey Allen, I really like the solid stainless steel lug nuts part #KALN1375S. These are never going to bulge or corrode like the other two piece lug nut options will so you'll never have any issues you'd have to blame on your lug nuts. Your…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

I'm sorry I really have no way of knowing what slide-out motor is on any specific travel trailer. I would need a part number (which is generally on the motor itself) to try and find a reference for it.