Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Doug, it looks like the unloaded tongue weight of your 2024 Rockwood Pro G19BH is right at 425 lbs so by the time the trailer is loaded you'd pretty easily be into the range that the Curt system part #C95MJ is designed to work with so this…
view full answer...That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…
view full answer...Hello Blaine, thanks for reaching out. BulletProof does sell a sway control 2-ball platform part #BPH76RR which can be used with a friction sway bar like the Reese #83660. The Replacement Head #RP58167 you were looking at is for the Reese weight…
view full answer...The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
view full answer...If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…
view full answer...To lower the ride height for your Yakima OnRamp Bike Rack #Y36FR I recommend using the Stacked Receiver #325-GH-304. The Gen-Y Phantom Hitch Ball Mount #GY27VR you found should only be used with Gen-Y towing attachments.
view full answer...You would not want the Dexter Electric Over Hydraulic Brake Actuator # K71-651 to get submerged with water while launching your boat. You will need to install it on your boat trailer in a position that would not allow it to encounter any water.
view full answer...In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…
view full answer...Electric over hydraulic actuators are not meant to be submerged but your best option for protection against water is the HydraStar Vented Marine Electric Over Hydraulic Actuator #HS381-8067. It looks like there is space forward of the winch post on…
view full answer...Your trailer hitch receiver may or may not be rated for weight distribution. If you let me know your model year I can help with specifics. If your trailer hitch receiver is rated for weight distribution, normally the tongue weight is increased and…
view full answer...Hi Tyson; the tongue weight rating for the BulletProof Light Duty Drop Tang for Adjustable Ball Mount #BPH66VR will depend on the adjustable ball mount you're attaching it too. Also, this is designed to work with the Bulletproof 1-7/8"…
view full answer...Hey Michael, The wheel for your Yakima Rack And Roll Kayak Trailer #Y08106 would be held in place with a single bolt. The bolt head would stick out past the wheel so you should be able to use another wrench to hold the bolt while you torque down the…
view full answer...Filters
- 6515 results