Availability of 24" Hitch Extension for 2" Hitch

Question

Question:

do you have a extension for a 2 inch hitch that is 24 long?

asked by: Ricky V

0

Expert Reply:

Hi Ricky; the longest extender we have that fits a 2" receiver is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long # HE18. Are you trying to clear something specific on the back of your Sprinter? Depending on what you're trying to do we may have another solution.

expert reply by: Robin H

0

HE18 Extender
(click to enlarge)

Ricky

1/14/2025

I have a sandy vans boost box on the back of the MB Sprinter and would like to pull my ATV trailer

Reply

Robin H.

1/14/2025

@Ricky assuming I'm looking at the right one here it looks like the boost box is 16" deep. I'm not sure where your receiver sits but the 18" measurement on the extender is from the center of the hitch pin hole to the center of the hitch pin hole. Have you considered the additional distance your ball mount will extend out beyond the hitch extender? That will likely be enough to get you the clearance you need. If not, a ball mount with a longer shank like # D-26 will probably do it. Since you're extending pretty far out there I would also add in an anti-rattle like the # RM-061.

Reply

Answer 1

Yes, there is. It is the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches item #GY89SR which is actually 14" long. This fits a 2" receiver, has a 500 lbs tongue weight, and a 10,000 lbs maximum towing capacity. This extender, like all…

view full answer...

Answer 2

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 3

Hello James, We have a hitch extender for you that'll work to protect your Ford Maverick from making contact with your motorhome, though the MaxxTow Hitch Extender with Step #MT70069 is ill suited for the job. Reason is the total capacity of your…

view full answer...

Answer 4

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 5

Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount of…

view full answer...

Answer 6

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 7

Hey David, I haven't really heard from anyone saying their truck bed camper couldn't clear the cab, but vehicle manufacturers can make some wild changes after a couple of decades. With your truck being only a few years newer than the camper…

view full answer...

Answer 8

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

view full answer...

Answer 9

For a 40" extension on your 2007 Sierra 3500 Dually you could use the Titan Hitch Box Extension #RP45018. This hitch extender comes at the full 48" length and can be cut down to 41". At That length it would have a max gross trailer…

view full answer...

Answer 10

Assuming that your 2014 RAM 3500 is equipped with a 2-1/2" factory hitch, using the Titan Hitch Box Extension, #RP45018, will work well for you when towing your snowmobile trailer. As for the extension acting like a lever, this is true for most…

view full answer...

Answer 11

I recommend replacing your jack with our Electric Jack #EJ-3520-BBX. This is a simple jack without the bells and whistles like you are looking for. You get a light, electric jack and manual override should the electric motor die. The jack will bolt…

view full answer...

Answer 12

Currently we do not carry the Hinge Kit 91858 which is needed to replace the bent hinges and install the Replacement Door for Atwood RV Water Heaters #AT91386.

view full answer...

Availability of 24" Hitch Extension for 2" Hitch

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching