bing tracking image
  1. Trailer Hitch Ball Mount
  2. etrailer
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 2 Inch
  6. 2 Inch Ball
  7. One Ball
etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 10,000 lbs

etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 10,000 lbs

Item # e99DR
Our Price: $61.43
Trailer Hitch Ball Mount
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Pop it into your hitch and tow - no assembly required! We designed this forged ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great. Great Prices for the best trailer hitch ball mount from etrailer. etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 10,000 lbs part number e99DR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (17)
  • Q & A (0)
  • Videos (8)
  • Photos

etrailer Trailer Hitch Ball Mount - e99DR

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 2 Inch
  • 2 Inch Ball
  • One Ball
  • 10000 lbs GTW
  • etrailer
  • Pre-Torqued
  • Steel Shank - Matte Black
  • Steel Ball

Pop it into your hitch and tow - no assembly required! We designed this forged ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.


Features:

  • Get everything you need to embark on your towing journey with confidence
    • Shank slides into your vehicle's hitch receiver
    • Ball provides the connection point for your trailer's coupler
    • Pin and clip secure the mount in place
  • Just hook up and go, no need to borrow a torque wrench to get set up
    • Hitch ball comes pre-torqued to factory specifications
  • Stop the rattle - hitch pin fits tightly to minimize movement
  • Quit worrying about rust
    • Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection
    • Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look
  • Trust in the durable, long-lasting steel construction


Specs:

  • Application: 2" x 2" trailer hitch receiver
  • Gross towing weight: 10,000 lbs
  • Tongue weight: 1,000 lbs
  • Ball diameter: 2"
  • Ball mount length: 8" from center of hitch pin hole to center of ball hole
  • Drop: 2" from bottom of inside of hitch opening
  • Limited lifetime warranty


Double-Duty Corrosion Resistance

A close-up view of the etrailer ball mount inserted in the hitch receiver

Most ball mounts have just 1 layer of paint or powder coat to protect them from the outside world. Scratch this away after towing just a couple times, and the raw metal underneath will start to rust before you know it. Some folks take pride in that rusty, worn-in look. After all, rust is proof that you've had plenty of road-worn adventures.


But we prefer something that works hard and looks like it's barely broken a sweat. That's why we added a layer of e-coat underneath the matte black powder coat to give you an extra layer of rust protection. So while others might be driving around with a flaking, rusted-out hitch, yours will be looking great for the long haul.


Quick Tip: As for the hitch ball itself, if you really want to make sure that black nickel stays looking fresh for longer, we suggest greasing it up before you tow.


How to Measure Drop on Standard Ball Mount

e99DR etrailer Towing Starter Kit with 2" Ball - 2" Hitches - 2" Drop - 10,000 lbs





Video of etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 10,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of etrailer Pre Torqued Ball Mount - e99DR

Hello everybody, this is Jeff at etrailer.com. Today, we take a look at the etrailer pre-torqued ball mount with the two-inch ball for a two-inch hitch receiver. This offers a two inch drop and if you flip it over a 3-1/4 inch rise. And this is a solid shank, so it does offer a 10,000 pound gross towing weight capacity. Now, this heavy duty ball mount will provide everything you need to embark on your towing journey with confidence. This ball mount will let you hook up your trailer to your tow vehicle.

As we mentioned, you can see the solid shank here slides into your vehicle's two-inch hitch receiver. And if you notice, it does include the 5/8 inch diameter pin and clip, which is designed to fit nice and tight into the hitch pinhole to help minimize your rattle when you're connecting this to your hitch receiver. Now, this ball mount will offer a two inch drop like it is right now. If you flip it over, it would offer a 3-1/4 inch rise, and those measurements are measured from the top of the shank to the top of the ball platform. So just to give you an idea, if we hold this level and then we measure there to the top of the platform or top of the shank would be two inch drop.

And if we flip it over and then your ball would be reversed, top here to top here, right at 3-1/4 of an inch rise. Now, this two-inch hitch ball provides your connection point for your trailer's coupler. This one here is pre-torqued to the factory specs in the drop position. This is a sturdy steel with rust-resistant finishes. The ball mount itself has a matte black powder coat over an e-coat on the ball mount.

And if you notice, the ball has a nice finish to it. It's a black nickel-plated hitch ball. And they offer the pin and clip also in matching black nickel finish. Application, fits two inch by two inch trailer hitch receiver, gross towing weight capacity of 10,000 pounds, tongue weight of 1,000 pounds, ball diameter of two inches, which is stamped on the top here. And the last thing I want to give you is the ball mount length.

And the ball mount length is always measured from the center of the hitch pinhole to the center of the ball. So on this one, if we go center, be right at 7-3/4 inches. But that should do it for the review on this etrailer pre-torqued ball mount with the two-inch ball for the two-inch hitch receivers.


Customer Reviews

etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 10,000 lbs - e99DR

Average Customer Rating:  5.0 out of 5 stars   (17 Customer Reviews)

Pop it into your hitch and tow - no assembly required! We designed this forged ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.

by:

Looks great quality



by:

I tested this out hauling my 24' pontoon last week. Perfect amount of drop for my truck / trailer combo and it's small enough to toss under the seat when I need to use my hitch for something else, but ready to grab and go when I need it.



by:

Heavy duty product that’s for sure. I highly recommended this one …



by:

Is a perfect fit for my needs, thanks much for you help in finding the right hitch at the right price!



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


17
17

See what our Experts say about this etrailer Trailer Hitch Ball Mount

  • Hitch Ball Mount For Boat Trailer That Sits 2 Inches Lower Than Truck
    Good afternoon Liz, there sure is! I highly recommend checking out the etrailer Ball Mount w/ Pre-Torqued # e99DR; it is rated at 10k lbs and has a drop of 2" which sounds perfect for your application. The ball is pre-torqued for you and the ball and hardware are coated in black nickel, which holds up to corrosion better than standard chrome balls (48hr salt rating vs 72hr salt rating). You won't have to worry about the water eating away at your ball mount when dropping your boat in the water.
    view full answer...
  • Recommended Hitch, 7-Way Connector, and Brake Controller for a 2024 GMC Savana 3500
    I would be happy to! Since you do not have the trailer package you're going to need to install two seperate wiring harnesses to add a 7-Way connector. You have to start with a custom fit 4-way because there is no way to just install a functional 7-Way. I have listed all of the parts you will need below: Trailer Hitch - etrailer Hitch item # e98861 4-Way Connector - Curt T-Connector Vehicle Wiring Harness item # 55540 7-Way Connector - Universal Installation Kit for Trailer Brake Controller...
    view full answer...
  • What is the Ball Hole Diameter of the etrailer Ball Mount e99DR?
    Yes, that is correct Mick! The The ball hole is 1-1/4" in diameter on the etrailer Ball Mount w/ Pre-Torqued 2" Ball item # e99DR. This mall mount comes with a 2" hitch ball that has a gross towing weight of 10,000 lbs and a maximum tongue weight of 1,000 lbs.
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee John S
Video Edited:
John S
Employee Ed W
Test Fit:
Ed W
Employee Trevor W
Test Fit:
Trevor W
Employee Matthew B
Test Fit:
Matthew B
Employee Michael B
Updated by:
Michael B
Employee Ryan F
Updated by:
Ryan F
Employee Aidan B
Video by:
Aidan B
Employee Ethan H
Video by:
Ethan H
Employee Samuel H
Video by:
Samuel H
Employee Kyle M
Video by:
Kyle M
Employee Justice A
Written by:
Justice A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.