Result: roof vent

The Dexter brake assembly 023-217-00 is a 10 x 2 1/4" brake for 3.5K axles that fits on a 4 bolt mounting flange. So, for a replacement you can use the Electric Trailer Brake Kit #AKEBRK-35-SA. These braking assemblies are self adjusting which…

As your Kaufman 47' EZ 4 Trailer has 7,000lb axles you will need either the Hydrastar Kit #HSE7K-TR1 for 1/2" lug nuts or the Hydrastar Kit #HYD54FR for 9/16" lug nuts. Both kits include new hubs, calipers, bearings, brake lines, the…

If the roof on your enclosed cargo trailer isn't rounded too much then you actually don't need a pre-arched roof vent as you can see in the attached picture of the Ventadome #V2092SP-28 installed on an enclosed trailer. If your trailer is has…

That's a hard figure to give as different winches draw different amounts of amperage and they also draw different amounts of amperage based on how close to the capacity the winch is at. A handful of hours is commonly the amount of time for most…

It appears you have the Buyers Electric Trailer Jack #3370093500 based on the design and shape of the override crank. It appears you will need to find one of these used as Buyers does list them available separately. You may be able to use the Crank…

The Seaflo Diaphragm Pump for Boats and RVs #SE58FR has the same 45 psi rating as the Shurflo 4008-101-A65 so it would be the closest match, but as long as your setup is able to take the higher 55 psi pressure rating of the Seaflo Diaphragm Pump…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

If you are using a HydraStar Electric Over Hydraulic Actuator For Disc Brakes like part #HBA16 in the 2019 Ford with integrated brake controller the adapter part #HBA-CAM is not needed. There is really only issues with compatibility using a Hydrastar…

If you are wanting to add one of the Torflex Lift Kits to your Forest River travel trailer you will first need to install a Dexter Torflex Axle as that is the type of axle these lift kits are meant to fit. My contact at Dexter Axle said that since…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

The brackets the fit tip for the #K71-725-02 is referring to is the bracket the axle fits into. I attached a picture that shows the bracket they are talking about.

The Torflex Lift Kit #K71-725-02 will allow you to add 3-1/8" of lift on your tandem axle trailer with #12 Dexter Torflex axles. Your axle has mounting holes in the side and top of the flange. You will bolt the lift kit to the side of the mount…