Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
(801 reviews)
Price: $38.66
In Stock
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Item # BV0554-03
Retail:$61.48
Our Price: $38.66
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (801)
- Q & A (0)
- Videos (2)
- Photos
Ventline RV Vents and Fans - BV0554-03
- Roof Vent
- Replacement Lid
- 14W x 14L Inch
- Tinted
- Ventline
- Continuous Hinge
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.
Features:
- Replacement cover for 14-1/4" x 14-1/4" roof vents
- Domed cover
- Easy to install and operate
- Smoke color
- Made of a polypropylene plastic
- Fits standard Ventadomes and post-1995 Elixir trailer roof vents
- 2-Year limited warranty
BV0554-03 Ventline Replacement Smoke Dome Assembly for Standard Roof Ventadomes (old-style, rounded dome)
Replaces 61271, 63115
Video of Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ventline Smoke Plastic Enclosed Trailer Vent Cover Installation
Today on this enclosed trailer, were going to install part number BV0554-03 from Ventline. This is a Ventline rounded dome in a smoke color. To start off well go ahead and remove the trim panel at the very bottom. Next well go ahead and remove the screen and also the crank handle as well. Once we have those parts away, well go ahead and reinstall the handle temporarily and raise the lid up, so we can remove it easily. Now well go ahead and then unscrew the crank assembly from the crossbar and then we can go ahead and release it from the lid.
Well slide the arm down towards an open slot at the bottom and then we can go ahead and release it. We got completely loose from the crank, now well go up top and go ahead and remove it from the vent. Well go ahead and open it up and you can see theres a small tab on the inside edge of the hinge and usually these are twisted to the inside, so we just have to untwist it and then it can slide it off. Now we can go ahead and slide on our new vent cover and then basically reinstall it in reverse order. Well go ahead and put our crank assembly up into place and line up the arm with the vent dome, put it into track and then well go ahead and reinstall the crank arm to the vent.
Then we can reinstall our screen and then our trim ring around the edge. In just a few steps the old one has been removed and our new one has been installed. Thatll finish it for part number BV0554-03 on this inclosed trailer. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke - BV0554-03
Average Customer Rating: 4.9 out of 5 stars (801 Customer Reviews)
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.by: Debbie 10/08/2022
The roof vents that I purchased was exactly what I needed! The shipping was fast. I installed them myself yesterday and it was pretty simple! I have purchased from etrailer.com before and have been very pleased with my purchases! Thank you!
by: Randy K02/04/2017
My experience with etrailer could not have been better. Their online catalog had very good pictures and product description, so I was confident the I was ordering the right item for my application. Pricing was competitive. George J emailed me after I placed the order to let me know he upgraded my shipping so I could get the product sooner. The vent covers came well packaged and undamaged. Now I need to install them on my vintage 1964 Airstream Overlander, which I bought several years ago and rehabilitated. The white plastic vent covers I installed several years ago became brittle and crumbled. I hope the smoke colored ones I bought from etrailer will last a bit longer, but the price was so fair I bought an extra pair for the next time.
Randy K.
2/4/2018
So far so good!
by: Den 10/18/2023
Great quality part that fits great. This cover lets in more light than the original one on my Rockwood trailer which I like. Install was easy after watching the video on Etrailer.
by: Paul10/06/2020
Called to get help ordering the vent cover to make sure I ordered the right part. Hally was extremely helpful. Got the part quickly. Hally had shown me where to go to watch an installation video. After watching it, installation was very easy. Pictures show the before and after. Thanks!
by: Stephen 05/09/2023
I bought a new set of the smoke vent covers to replace the same vent covers purchased 8 years ago. Trailer has been sitting for 4 years and didn't want to have a problem with them on our trip next week, so I purchased these as preventative maintenance since the trailer has been sitting in the sun for all of that time. For some reason the smoke covers have had a considerably longer life compared to the white ones which for me only lasted 2 years. Standard shipping was fast, and the vent covers were well packaged. Will buy from etrailer again!
by: Jonathan 07/02/2023
eTrailer is an amazing company to work with. They are extremely helpful when it comes to finding the part you need, and then when the part arrives … their installation videos make the process so easy to complete!
by: Don10/29/2021
The vent cover is a quality replacement almost identical to the OEM on 2018 Windjammer. The OEM had severe ultraviolet deterioration and had a crack in the top center area and a possible hail damage on an outer edge outside of the seal. Had not leaked inside yet! We will see if this one will last any longer than the OEM’s 3 - 4 years.
Don
10/30/2022
One year later vent is doing it’s job. No failure.
by: Mark05/05/2019
Quick simple fix to replace a vent cover lost to the weather. Installation took less than 5 minutes, product fits like the original. William B. made finding and ordering the right part a breeze.
by: Lloyd12/21/2020
I have a 16ft 1972 Brougham travel trailer,and my old vent lid disintegrated.I wasn't sure which vent lid to get.I measured the square hole on the roof and it is 13 inches square. I also needed to be sure of the hinge.The hinge portion on the vent cover is 9 inches.After I removed the screws from the vent lid raising mechanism, and disconnected it from the vent lid rail,I went up top,and opened up one side of the rolled metal hinge.Then the roof vent lid slides off to one side.Then you just slide the new roof vent lid onto the hinge,and bend down the tab to secure it.You then reattach the mechanism inside the trailer.Its actually very easy to do,with just a Phillips and straight slot screwdriver. I attached photos of what remained after my lid was blown off completely which shows the hinge and lifting rail that come with a new roof vent cover attached.I also showed a close up of the hinge and the little tab that is bent in on both sides to keep the lid from sliding sideways. Finally I have pics of the new lid installed.I was happy with this product,and didn't realize you could just replace the vent lid so easily.
by: Kenneth 11/16/2023
perfect fit holding up supper good no issues - good durable quality
by: Tim 06/23/2023
Love dealing with e-trailer always the right parts at a fair price and great customer service over the phone.
by: Ed07/14/2023
Fits a 2016 Forest River Wolf Pup just right and wasn't too difficult to change out. Thanks!
by: Mark11/13/2022
I have an older Car Mate car trailer. The roofvent was very bad. I wasn’t sure about being able to get an exact replacement. Measurements were the same, so I ordered one. It arrived within a few days. I was able to install it in a few minutes. The crank open still works great and no more leaks. I highly recommend this product and also etrailer, as I have purchased other perfect fitting parts from them. ….Mark
by: Douglas 10/05/2023
Easy install, perfect fit !!!!!
by: Bruce M.07/12/2014
This is just what I was looking for. It only took a few minutes to assemble and put on my Airstream camper, and it looks so good.
The price was great and very fast shipping. I will bookmark your website and buy from you again when the need arises. Thank you very much.
by: Robert V07/26/2013
Replaced two weather beaten, cracked vents. Easy installation just follow the directions. Took about 10 minutes each looks better then the old white ones.
by: Karen11/13/2021
Easy installation, perfect fit.
Karen
11/28/2022
The vent cover is still strong with no signs of wear or cracking. Its great!
by: Gerard L.07/30/2013
Cover is Great. Had to replace mine because if hail storm damage. The included instructions made it very easy to install in 10 minutes and it looks great on my trailer.
by: Timothy 04/04/2023
Outstanding product and service as usual from etrailer.
by: Jimmie B. 02/03/2014
I will faithfully give your Company my business I just hope it is not too frequent. Long story short the part worked just as it should. I also need to order a new hand crank because the a one is defective.
by: SK09/09/2016
Great product and fits perfectly on my 2007 Keystone Raptor 3612DS Toy Hauler.
Smoke color adds a nice touch and overall looks better.
Superfast shipping much appreciated!
Thanks again
SK
by: Steve L.07/03/2015
The storm broke two of my vent covers. More storms were forecasted for later this week. I tried the old favorite, duct tape, to no avail. They still leaked. We found the replacement online at eTrailer. One phone call is all it took to receive a shipment of vent covers. I even discussed with eTrailer on the phone to make sure these were the correct vent covers for my older trailer. In two days! I received the vent covers at the campground. A few hours later they were installed and the storm that night tore up the awning, but not a drop from the ceiling vents. P.S. Does eTrailer carry awning parts?
Steve L.
7/27/2016
Still working well.
by: michael11/15/2021
Purchased this vent replacement a year ago and it’s working great and holding up to the weather.
by: Woody 09/24/2018
The smoked Ventline replacement vent cover worked wonderfully. I had to spring for the expedited shipping in order to get it before the hurricane hit but it arrived on-time in 2 days as promised, was easy to install thanks to the installation video, fit perfectly, and provided a secure seal against the rain and wind. As always, etrailer delivered as promised and as advertised. That is why I use them exclusively for all of my trailer needs.
Woody P.
9/24/2019
The cover has worked just fine and is holding up very well. Yet another reason etrailer will always have my business.
by: John04/24/2018
This replacement vent cover was a perfect fit for the vent on our Forest River enclosed trailer. Installation was a snap, and took less than 10 minutes. I watched the installation video on etrailer.com before ordering, so I was pretty confident at that point that we were getting the right part. Customer service was very good as well. They shipped the item within a couple of hours after I placed the order, and I received it in 2 days, just in time to beat the next rainstorm.
John
5/7/2019
Excellent. It does exactly what it is supposed to do.
25
801
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- How to Pick out Replacement Roof Vent Lid for Trailer Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- How to Select Replacement Trailer Roof Vent LidTrailer makers do not keep track of the smaller items like roof vents that are used in fabrication of their RVs so when selecting a replacement roof vent lid you just want to match up the size and the type of hinge used on the vent. The vast majority of square trailer roof vents are the 14 x 14-inch size and these fit into roof openings that are typically 14-1/4-inches x 14-1/4-inches. You can refer to the linked photo that shows the four hinge types typically found on RV roof vents. once...
view full answer...
- How to Pick Out Replacement Vent Cover Lid for 2013 Haulmark TrailerI wish there was a database that had all of the replacement parts for older trailers like yours, but the only way I can recommend a replacement cover for you trailer would be to have you check out and measure yours first so you can compare it to what we have. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name...
view full answer...
- How to Remove a Roof Vent With a Continuous HingeIf you are asking how to remove a vent that has a continuous hinge then check out the video that I attached. One of our installers walks you through the steps of uninstalling your old roof vent with a continuous hinge and replacing it with the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-03.
view full answer... - How to Pick Out Roof Vent Lid Cover for 2013 Rockwood 2503Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles. Basically the easiest way to select...
view full answer...
- How to Pick Out Replacement Roof Vent Lid for 2001 Haulmark TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- How to Replace a Roof Vent Cover with a Continuous HingeThe metal hinge riveted to the inside of the roof vent cover is not designed to be removed. When you replace the cover you would need one that already has a hinge in place such as part # BV0554-03. You can see this process done in the attached install video.
view full answer...
- Vent Cover Recommendation for 1996 Lance Slide In CamperIn order to determine if we have a vent cover to fit your 1996 Lance slide in camper, we will need a measurement of the vent opening. I have included a link to the replacement roof vents that we have available. If we have your size you will next want to take a look at the type of hinge that is on your current cover and compare it to the pictures of the hinges for our covers. If you can provide me with your vent information, I would be happy to see if we have something that will work for you.
view full answer... - Replacement Roof Vent Lid for Trailer with Older Dome Ventline Roof VentJudging by the picture you sent in it looks like you are in need of the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents # BV0554-03. The picture is a little grainy though so you would want to this cover out and make sure it matches.
view full answer...
- How to Determine the Correct Replacement Vent Lid for a Trailer Roof VentTo determine the correct replacement vent cover, if available, you will need to look at the hinge style and the size of the vent the lid fits on. For example, lid # BV0554-03 has 1 long continuous hinge and fits 14-1/4 by 14-1/4 inch roof vents. There are also 3 point and 4 point hinges as well. I have linked all of the replacement lids we carry so you can look to see if we have a match for your vent.
view full answer... - How to Pick Out Replacement Vent Cover Lid for Haulmark TrailerMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Replacement Roof Vent Lid for 2006 Trailmanor 2720SL Travel TrailerThank you for providing a photo of your 2006 Trailmanor 2720SL travel trailer's roof vent. I did check the Trailmanor website for any information on the brand and type of vents they supplied but nothing is indicated. We can still help you! There are three basic types of trailer roof vent lids. The three types are designed to fit the type of hinge used, either a 3-point, 4-point or continuous hinge design. The part you referenced, # BV0554-03, is a continuous hinge type. The link provided...
view full answer...
- What Vents will the Ventline Vent Cover # BV0554-03 fit OnThe Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-03 that you referenced is designed to work on 14-1/4 inch by 14-1/4. This cover will fit standard Ventadomes and Post-1995 Elixir trailer roof vents. The other option you have would be a Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent # BVD0449-A03. The big difference is that this lid uses three individual hinge clips, whereas the # BV0554-03 uses one continuous hinge. Check out the picture...
view full answer...
- Replacement Vent Cover or Complete Vent Assembly for a Pace TrailerYou may be able to just replace the vent cover. You would need to know the vent manufacturer and its approximate age. This information may be on the vent somewhere. If you cannot find this information, you will need to look at the type of hinge you have and then compare that to the pictures of the hinges for the covers we carry on the product pages. The cover you have referenced, # BV0554-03, is designed for Standard Ventadomes and Post-1995 Elixir Trailer Roof Vents. Replacing the entire...
view full answer... - Availability of Roof Vent Lid to Fit a 1984 2100 Shasta CamperMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- How to Choose Proper Replacement Roof Vent Lid for 2017 Forest River Cherokee 304BHThis happens all the time, no worries! You can indeed get a replacement lid, it's just a matter of matching up what's remaining on your roof to the correct replacement lid, which isn't difficult at all. A standard vent has a 14x14 inch opening, and can have a 3-point, 4-point or a continuous hinge. To find the correct replacement, use the provided link. On the left side of the page, click the filter for the hinge style you have, then choose the color you want. I've also linked you to...
view full answer...
- Replacement Lid Recommendation for 1970 Aristocrat Land CommanderFrom the picture you sent in it looks like you are correct and you need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vent # BV0554-03 since you have the continuous hinge style.
view full answer...
- Vent Replacement Cover for a 2003 Thor Tahoe LiteThe Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke part # BV0554-03 is designed to fit the very common Ventadomes and post-1995 Elixir trailer roof vent. If you have one of these models this will be your replacement. If you have another brand roof vent please let me know and I will give you the correct replacement. The manufacturer's name and model number should be on the vent. The variance in price comes down to a great deal of factors through an algorithm...
view full answer... - Picking Out Replacement Roof Vent Lid Cover for 2015 Dutchmen Denali 287REMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
- Replacement Cover For Non-Powered Vent On 2012 Forest River Rockwood Mini Lite TrailerTo find the correct replacement vent cover for your 2012 Forest River Mini Lite you will need to know 2 things. You will need to know the size vent cover you need and also the hinge style on your vent. Most vents on an enclosed trailer measure 14 x 14 inches. I have attached a photo that shows the three different hinge styles for vents we offer. I have also attached a link to our product page for the replacement vent covers we offer you can check out. If you have any questions about a...
view full answer...
- Correct Replacement Vent Lid for Stealth Cargo TrailerThanks for the pictures! Yes, the replacement vent lid part # BV0554-03 that you referenced is the correct fit for the vent you have on your Stealth Cargo Trailer and is smoked like you prefer. This will let in some light whereas the white does not since it's not translucent. I attached an install video for this lid for you to check out as well.
view full answer...
- Trailer Vent Lid Cover Compatibility With 2011 Legend Enclosed Motorcycle TrailerThe Ventline Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - Smoke # BV0554-03 is a fit for standard size vents and will most likely be the correct size for your 2011 Legend motorcycle trailer. The only thing you will really want to confirm prior to purchase is the style of the hinge. There are many hinge styles to choose from and you want to make sure the hinge style is compatible with your vent. I've attached a photo to help.
view full answer...
- How to Find the Correct Replacement Vent Cover for a Pace Cargo TrailerThe best way to find the correct replacement vent cover for your Pace cargo trailer is to first measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, item # BV0554-03, that you referenced,...
view full answer... - How to Pick out Roof Vent Lid ReplacementMost likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Debbie
10/9/2023
The vents that I purchased are perfectly fine after a year! Thank you!