Roadmaster Comfort Ride Leaf Spring Suspension Kit for CrossRoads Elevation TF3612
Updated 07/27/2025 | Published 05/01/2025 >
Products Featured in This Question
Question:
Hello, I own a Crossroads Elevation TF3612-13 Serial 4V0FC3623DE012086 Lippert 7000 LB axles Is this upgrade what I need to replace the original suspension? If so I would want to replace the dry bolts with wet bolt could you supply the correct wet bolt specs and/or part number. Thanks
asked by: Adam B
Expert Reply:
Hello again Adam! Since you have 7k Lippert axles the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570 is the correct kit. This is going to be a significant improvement over the stock suspension. For wet bolts you can use the # 34007-187-00. With the way the system works you will only need four wet bolts for this setup. Let me know if you need anything else!
Product Page this Question was Asked From
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: road master comfort ride
- Search Results: spring hanger
- Search Results: hanger bracket
- Search Results: leaf spring bushing
- Search Results: slipper spring
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: 3" Round Trailer U-Bolts (Qty 2)
- Search Results: emco trailer leaf springs
- Video: Review of EZ Loader Trailer Suspension Parts - Hangers - CES54BR
- Shop: Step Wet Bolt for 1-3/4" Double Eye Springs
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: EZ Loader Equalizer Shackle Hanger - Tandem Axle - Galvanized - Bolt-On - 3" Frame - Qty 1
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Search Results: leaf spring hanger brackets
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: Detailed Breakdown of the Step Wet Bolt for 1-3/4" Double Eye Springs
- Q&A: Can MORryde X-Factor and Roadmaster Comfort Ride Systems be Installed Together?
- Q&A: Does the MORryde X-Factor Crossmember Adapter Kit for Correct Track Hangers Install on Center Hanger
- Q&A: MORryde X-Factor Crossmember Fit for Standard Frame Hangers with Correct Track
- Video: Feature Review Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Q&A: Can I Replace Just a Brake Magnet or do I Need to Replace the Assembly
- Q&A: Upgrading Brakes and Suspension On 2022 Grand Design Imagine Travel Trailer 2910BH
- Q&A: Correct Leaf Spring for Trailer with Lippert 3,500 lb Axle
- Shop: Gooseneck Hitch
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: Setting Up Your MORryde Standard Frame Hanger X-Factor Crossmember - 2018 Grand Design Reflection Fi



Adam
5/1/2025
Thanks again Robin! While I'm thinking about the suspension, let's talk about replacing the axle bearings. What parts am I going to need? Do you need the specs on the axle and hubs or can you find that information from the model and serial number I provided.