Waterproof clearance/markerlight can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount ... or passenger's-side fenderLight pops out of bracket and flips around to switch sides Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times
Add a little extra style to your vehicle by replacing those dull, factory-installed markerlights with these bright, long-lasting LEDs. Smoke lenses lend a hint of tint.
Weatherproof clearance/markerlight installs on your passenger-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for passenger side fender Weatherproof housing and lens
Add a little extra style to your vehicle by replacing those dull, factory-installed markerlights with these bright, long-lasting LEDs. Clear lenses let light shine through brightly with no obscuring ... to provide that big, boss style LED lights are bright and long-lasting Clear lens housing provides no tint 2 Markerlights included Lifetime warranty
Add a little extra style to your vehicle by replacing those dull, factory-installed markerlights with these bright, long-lasting LEDs. Smoke lenses lend a hint of tint.
Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as…
We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will need to be either…
Thanks for sending us a picture! The 10 x 2-1/4 inch trailer brake shoe pads part #BP04-095 you referenced only works with the manual adjust brake assembly. What you need is the left hand shoe lining #K71-681 and/or right hand shoe lining #K71-682…
Yes, the DeeMaxx Disc Brake Assembly #DE89YR will fit on a 3,500lb UFP axle. You may need a different Grease Seal #168255TB depending on the age of your axle. If you have a grease seal with a 1.68" inner diameter this is the seal you will…
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
I'm not sure why they said those were your only options, but we do have the correct replacement oil seal for your Dexter 10k hub from 2006, and is the exact replacement for a National 370150BG: - Unitized Oil Seal #10-51 The #10-51 has an inner…
I will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is #MCL76AB. The red version is #MCL76RB. Another option is to use Peterson lights #M353A…
I understand how it would be unclear which measurement to use since the center of the axle is not the same as the center of the wheel on a torsion axle. For a single axle trailer, measure from the center of the spindle (center of wheel) to the…
I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your door cutout at 4-5/8" long x 3-3/8" so this is our best…
The Redline Flush Mounted Door Latch, #L3980, will mount in a door that has a 3-3/8 x 4-5/8 inch mounting hole. This latch is rust proof and will attach to the door using screws instead of pop rivets. If this latch cannot fit into your door's…
We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…
Kit includes a power tailgate handle and manual keyed lock to protect your tailgate and cargo. Powered lock wires into the existing power door locks, so when you lock your truck, you lock your tailgate.
Add a little extra style to your vehicle by replacing those dull, factory-installed markerlights with these bright, long-lasting LEDs. Smoke lenses lend a hint of tint.
Radial special trailer tire with automotive-grade tread has a ply rating of 10 and a 1,520-lb max load at 80 psi. Designed for highway use. Constructed of double steel belts and full nylon plies. Fits 12" wheels.
Add a little extra style to your vehicle by replacing those dull, factory-installed markerlights with these bright, long-lasting LEDs. Ion chrome lenses are tinted for a cool, classy look. to provide that big, boss style LED lights are bright and long-lasting Ion chrome lens housing provides significant tint Kit includes: 2 Amber LED markerlights 2 Red LED markerlights 1-Year warranty
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Aries fender flare side markerlights for Jeep Amber lens LEDs offer bright, long-lasting light Splices into existing factory wiring harness Wires route through fender frame to keep them well
Waterproof LED clearance/markerlight installs on your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base ... Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side
Weatherproof clearance/markerlight installs on your driver-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for driver side fender Weatherproof housing and lens protect
3-3/4" x 7/8" Oblong. Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire ... Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing. brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising. Automatic Leveling and Simple Installation
8-1/4" x 3-1/4". Incandescent markerlight mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket ... can be used as either a side markerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (not included). Accepts ... can be used as either a side markerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front
8-1/4" x 3-1/4". Incandescent markerlight mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket ... lights on your trailer - one as a front or rear clearance light and one as a side markerlight.
3-7/8" x 1-1/4" Rectangle. Trailer fenderlight functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts ... as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side markerlight. Surface-Mount Light Surface-mount
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.
Filter Results
