Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers

Ask the Experts about this Tekonsha Accessories and Parts

• Installing Trailer Brake Controller on 2019 Chevy Silverado 1500
  The Plug-In Wiring Harness # 3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado and Sierra 1500s). Based on the picture you attached it looks like you have found the correct port but the cap just hasn't been disconnected from it. This dummy plug can be easily removed by pushing on the release tabs and pulling it off....
  view full answer...
• Location of Brake Controller Plug on 2019 Chevy Silverado 1500
  I took a look at the owner's manual for the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P which plugs into your Prodigy P3 # 90195 trailer brake controller and it says the harness for your 2019 Chevy Silverado 1500 "will be located underneath the dash and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 14-pin connector that mates with the one on the adapter." The accompanying cut out of the directions shows...
  view full answer...
• Where is the Brake Controller Plug on my 2019 Chevrolet Silverado 1500 LD
  The factory brake controller port on your 2019 Chevy Silverado 1500 LD is in your vehicle's junction box underneath the dash, to the left of the steering column. The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3064-P is actually not the part you need for your Silverado 1500 LD. That adapter is for the new body style Silverado. The adapter you need is part # 3016 which is for the older body style including the LD version of your 2019 Silverado. I attached a video...
  view full answer...
• Which Brake Controller Adapter Plug for 2020 Chevy Silverado 1500
  The # 3064-P is the correct brake controller adapter for both the 2019 and 2020 versions of the Chevrolet Silverado and GMC Sierra 1500, so you've got the correct adapter to allow for a plug and play brake controller installation.
  view full answer...
• Check Engine Light Comes On When Tekonsha P3 Brake Controller is Plugged In But Goes Away When Not
  This is extremely odd and while you're not the first person I've seen with this issue, your Tekonsha P3 # 90195 won't connect to anything that will cause the check engine light on your 2019 Chevy Silverado 1500 to turn on since it should only be connected to a 12v power supply and the stop light switch. Since this goes away when you unplug it, I would check to make sure that you've got it plugged into the correct spot. There is a dummy plug that is connected where you want to plug into...
  view full answer...
• Can a Trailer Brake Controller be Added to 2021 Chevy Silverado 1500 With Factory Tow Package
  You can absolutely install an aftermarket trailer brake controller to your 2021 Chevy Silverado 1500 with the factory tow package, so whoever told you that had some bad info. And since you have the factory tow package you can simply add a plug and play brake controller for a simple install. The best brake controller for your 2021 Chevy Silverado 1500 is the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. The P3 is the best because it gives you the most consistently smooth braking,...
  view full answer...
• Will the Tekonsha Plug-In Wiring Adapter # 3064-P Work with My 2020 Chevrolet Silverado 1500?
  Yes, the Tekonsha Plug-In Wiring Adapter # 3064-P will work with your 2020 Chevrolet Silverado. In order for it to work, you will need a compatible brake controller like the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. Once it is installed into your wiring system of your vehicle, you will instantly be able to power your brake control system. This is a plug-and-play adapter.
  view full answer...
• Brake Controller Plug Location for 2020 Chevy Silverado 1500
  The plug for a brake controller on your 2020 Chevy Silverado 1500 will be located up under your driver's side dash on the left side (see attached). This is where you will plug in an adapter like the Tekonsha # 3064-P for a brake controller like the Tekonsha Prodigy P3 # 90195. I have attached the installation instructions for this adapter kit for you to check out as well.
  view full answer...
• Where Is Factory Trailer Brake Controller Port On 2021 Chevrolet Tahoe W/ Factory Tow Package?
  The factory trailer brake controller port on your 2021 Chevrolet Tahoe is located underneath the dash just to the left of the steering wheel. It will be taped to another harness so it may take a bit of looking to find. Keep in mind that if your Tahoe does not have the factory tow package, the connector may not be there and you would need to hardwire a controller. At this time (5/30/2021) the only plug-in adapter confirmed to fit is the Curt Custom Wiring Adapter for Trailer Brake Controllers...
  view full answer...
• No Power To Brake Controller With Pedal Pressed Using Factory Harness on 2020 Chevy Silverado
  It sounds like you have a few of the wires mixed up. I don't know what colors the factory harness uses but the white colors on most brakes controllers will be as follows: That said, you would also want to check the third brake light fuse as well. Black = 12 Volt Power Red = Stop Light Switch White = Ground Blue = Brake Output If you want to avoid having to do any splicing we do have plug-n-play options available which will be dependent on which brake controller you are using....
  view full answer...
• Recommended Brake Controller and Adapter for 2019 Chevy Silverado 1500 LD
  I have a solution for you, but the # 3064-P adapter is only a fit on the HD models of GM trucks, so it would not fit on your 2019 Chevy Silverado 1500 LD. It sounds like you also need a brake controller as well, so I recommend using the Tekonsha Prodigy P2 # 90885, which is one of the most popular brake controllers on the market and well known for its reliability. The P2 provides you with proportional braking for your trailer, so it will activate immediately without delay and adjusts the...
  view full answer...
• Where is Brake Controller Port on 2019 Chevy Silverado 1500
  To install a brake controller like the Prodigy P3 part # 90195 in your 2019 Chevy Silverado 1500 what you need is the install harness part # 3064-P which does plug into the port under your dash. The easiest way for me to describe where you'll find it is to have you check out the install video link I attached to this page that will walk you through the entire process.
  view full answer...
• Where is the Dummy Plug to Install a Brake Controller Adapter on 2019 Chevrolet Silverado 1500
  I've linked the installation video of a brake controller on a 2018 Chevy Silverado 1500 for you to have a look at, as well as provided a photo of the plug you're looking for- the process will be the same on your 2019 Silverado 1500. If you fast forward to around the 1:45 mark of the video, it shows where the plug can be found under the panel on the left hand side of the steering column. This is where you will install the Tekonsha Plug-In Wiring Adapter # 3064-P.
  view full answer...
• Adding An Aftermarket Brake Controller To Replace The Factory Controller On A 2020 GMC 3500
  When you add an aftermarket brake controller like the Tekonsha Prodigy P3 # 90195 to your 2020 GMC Sierra 3500, you will need to have the computer flashed by a GMC dealer to disable the factory brake controller. If you do not do this the computer will throw a trouble code and likely neither controller will work properly. A Tekonsha Plug-In Wiring Adapter # 3064-P will allow you to plug directly into the connection on your Sierra.
  view full answer...
• Troubleshooting Dim Screen of Prodigy Brake Controller Install in 2019 Chevy Silverado
  The brake controller install harness part # 3064-P is the correct install harness for the Silverado 1500 models but for the 2500/3500 models you'd instead need the part # 3016. Since the two connectors are different I'd assume you have a 1500 model but wanted to mention that just in case. Unlike previous generations of Chevy trucks yours should not require any underhood connections being made. It sounds like your controller has an internal problem based on the display not being fully...
  view full answer...
• Troubleshooting Brake Controller That Stopped Working After Breakaway Pin Was Pulled
  Sounds like the third brake light fuse of your truck blew possible when the breakaway cable was pulled. Since this circuit is tied to the stoplight circuit used for brake controllers typically when this fuse blows the brake controllers typically stop working with the brake pedal. Easy way to check this is to press the brakes and see if the cab light on the truck activates with the brakes. Testing the brake controller is fairly easy though. Sever the blue brake output wire near the brake...
  view full answer...
• Install Harness for Prodigy P3 Brake Controller for 2021 Chevy Suburban
  To install the Prodigy P3 brake controller part # 90195 in your 2021 Chevy Suburban would require the install harness part # 3064-P which plugs in under the dash.
  view full answer...
• Can Curt T-Connector C55384 Be Added To 2021 Chevy Silverado To Power Extra Tail Lights On Camper?
  I would be happy to help! Yes the Curt T-Connector # C55384 you were looking at for your new 2021 Chevrolet Silverado 1500 will plug in inline of your factory connector and allow you to plug in both your campers 7-way connector and the 4-way connector you are using to power the extra tail lights. The only thing you will need to be sure of is that the combination of both connectors does not overload the individual circuits of the factory wiring. Due to only adding one extra set of...
  view full answer...
• Which Brake Controller Install Harness for Tekonsha Primus IQ for 2021 Chevy Tahoe
  The brake controller install wiring harness part # 3064-P is correct for your 2021 Chevy Tahoe and your Tekonsha Primus IQ # TK90160. I'd be willing to bet if you traced the blunt cut wires you found up further you'll find the correct connector that matches the # 3064-P as it sounds like someone plugged in your brake controller pigtail that the truck came with.
  view full answer...
• Troubleshooting Tekonsha Primus IQ Having PL Code When Installed On 2020 Chevy Silverado 1500
  Based on the issue you are describing with your Tekonsha Primus IQ # TK90160 getting the PL code and your testing it does indeed sound like the stop light switch on your 2020 Chevrolet Silverado 1500 is bad. You should not have any power on the red wire when the brake pedal is NOT pressed, and based on what you described it sounds like you do have some power. I would take your truck to your local Chevy dealer and have them check out the stop light switch, as it is likely still covered...
  view full answer...
• Does Integrated Brake Controller of 2020 Chevy Silverado 3500 Disable to Install Prodigy P2
  You would not have to disable the factory controller of your 2020 Chevy Silverado 3500 that you installed the Prodigy P2 part # 90885 and install harness # 3064-P in. I'd just set the gain on your OEM controller to zero and use the P2 and you'd be set.
  view full answer...
• Location to Mount Red Arc Tow Pro Elite Brake Controller on 2020 Chevrolet Silverado 1500
  The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR can be mounted just about anywhere that the wires can reach, and there is enough room behind the button. The button or knob requires at least 1 3/4" of depth and 3/4" width of space to mount up. I've installed this brake controller in several different kinds of vehicles and for your 2020 Chevrolet Silverado 1500 the Red Arc is an excellent choice. I like the remote design, it makes it to where you don't have to put a big box...
  view full answer...
• Where to Mount Redarc Tow-Pro Elite Brake Controller on 2020 Chevy Silverado 1500
  The Redarc Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2, along with the Plug-In Adapter # 3064-P for easy installation, is an excellent choice for your 2020 Chevy Silverado 1500. One of the many benefits of the Tow-Pro Elite is the small, unassuming profile of the control knob itself, which basically allows it to mount anywhere you have the space. I went through our customer reviews and it looks like there should be a great location on the left side of the steering wheel on...
  view full answer...

Do you have a question about this Accessories and Part?