etrailer E-Track Backing Plates Hardware Grade
Updated 09/29/2026 | Published 09/17/2026 >
Question:
What grade are the bolts? Im putting these on a 2x8 wooden deck car hauler that will haul a 3,800lb car and need to know if the fasteners are of sufficient strength.
asked by: Eric
Expert Reply:
Thanks for reaching out Eric. The etrailer E-Track Backing Plates with Hardware # e46RR include four 1/4"-20 x 2-1/2" Grade 5 bolts per backing plate. This hardware should be plenty strong for securing the 3,800-lb vehicle you mentioned, especially when you're using 2 to 3 backing plates per section of E-track. The backing plates themselves are an important part of the overall strength of the installation. Rather than concentrating the load at individual bolt locations in your 2x8 wood decking, they help spread the forces over a much larger area, reducing the stress on both the mounting hardware and the wood itself.
As with any vehicle tie-down setup, you'll also want to make sure the E-track, mounting locations, straps, and attachment points are all appropriately rated for the load.
Do you already have the rest of the components picked out? If not, I'd be happy to help make sure everything is rated appropriately.
Product Page this Question was Asked From
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
- Accessories and Parts
- E Track
- Tie Down Anchors
- E Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: atc trailer parts
- Search Results: e track
- Search Results: tool box
- Shop: Snap-Loc 2" x 9" E-Track D-Ring Tie-Down Strap - 4,400 lbs
- Shop: Truck Bed Auxiliary Tank
- Shop: Tool Box
- Shop: E-Track Adapter Straps for CargoBuckle Ratcheting Tie-Down Straps - 7" Long - 2,500 lbs - Qty 2
- Shop: etrailer E Track Heavy-Duty O-Ring Tie-Down Anchor - 2,000 lbs - Qty 1
- Shop: Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- Shop: Erickson E Track Tie Down Ring - 2,000 lbs
- Shop: Caliber TrailBlazer ATV/UTV Tie-Down Kit - 4 Straps - Fits 25" to 35" Tires - 3,300 lbs
- Shop: etrailer E Track Rope Tie Offs - 2" Wide x 8-1/4" Long - 1,333 lbs - Qty 2
- Q&A: Looking for Trailer Jack with 2 inch Outer Diameter
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer hitch
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Does DeeZee Truck Bed Tool Box DZ8560WB Fit 2026 Ford F-350 Long Bed
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Q&A: Tool Box And Tonneau Cover For 2022 Ford F-450
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Shop: Brake Controller
- Video: Feature Review - Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge
- Q&A: What is Difference Between UWS Truck Bed Chests # UWS08298 and # UWS01044


Eric
9/29/2026
Thank you for replying. This will work. My car hauler has crossmembers every 16" so my plan was to put a backing plate in between each crossmember while also anchoring into each crossmember. I do have the straps picked out that are rated for my applications as I'll be trailering my classic car and my side by side. Thank you