bing tracking image
  1. Car Tie Down Straps
  2. Erickson
  3. Ratchet Strap
  4. 851 - 1200 lbs
  5. 11 - 20 Feet Long
  6. 1 Strap
Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs

Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs

Item # EM58523
Our Price: $49.57
You Save: 5%
Car Tie Down Straps
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load. 1-800-940-8924 to order Erickson car tie down straps part number EM58523 or order online at Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs. Car Tie Down Straps reviews from real customers.
  • All Info
  • Reviews (113)
  • Q & A (0)
  • Photos

Erickson Car Tie Down Straps - EM58523

  • Ratchet Strap
  • 851 - 1200 lbs
  • 11 - 20 Feet Long
  • Erickson
  • 1 Strap

This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.


  • E-track tire strap with roller idler lets you secure a vehicle to your trailer
  • Roller idler allows you to move ratchet away from vehicle so that it's easier to operate
    • No need to crawl under vehicle to tighten ratchet
    • Positions at base of tire to serve as third anchor point for strap
    • Helps keep tension on strap
  • Ratchet strap secures tire in place
    • Sturdy ratchet helps you achieve and maintain maximum tension on the strap
    • Release lever disengages the ratchet when you're ready to unload
  • Spring-loaded fittings on strap ends and roller idler snap into E-track anchor slots
    • E-track sold separately
  • Strong polyester strap webbing
  • Rust-resistant zinc-coated steel roller idler and ratchet


  • Strap dimensions: 2" wide x 12' long
  • Safe working load limit (WLL): 1,100 lbs
  • Maximum load (break strength): 3,300 lbs
  • Quantity: 1 ratchet strap with roller idler
  • 90-Day warranty

Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.

This tire strap has a built-in roller idler that makes it easier to ratchet down the strap. The roller idler allows you to move the ratchet away from your vehicle so that you can tighten down the strap without crawling under your vehicle. The spring-loaded E-track fittings on the strap ends and the roller idler easily clip into E-track anchor slots (E-track is sold separately). And the zinc-coated steel construction of the roller idler and the ratchet resists rust.

Setup is easy. One end of the ratchet strap clips into the E-track on one side of the tire, and the roller idler clips into the E-track on the other side of the tire. Then the strap is run through the roller idler, which acts as a third anchor point for the strap, and the ratchet is moved away from the tire. The other end of the strap is then clipped into the E-track. You should now have plenty of room to operate the ratchet and tigten down the strap.

58523 Erickson Manufacturing Adjustable Tire Tie-Down Strap with ETrack Roller Idler Pulley - 1,100 lbs

Customer Satisfaction Score:

Customer Reviews

Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs - EM58523

Average Customer Rating:  4.8 out of 5 stars   (113 Customer Reviews)

This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.


I have trailered my Motorcycle hundreds of miles, without any issues, they hold great and fit very well under the tight fenders on my spyder.



Still working very well after a year. I did have to adjust the rubber blocks, but that is more due to the fact that mt fenders are very tight to the wheel.


I have had several different Tie-down straps over the years. This one is the best and eaisest to use. This order is for a new trailer.

John P.


Very good, the rubber blocks stay on the tires and my cars do not get loose inside the trailer. I use these with my two-car trailer.


Worked great. Very solid hold on vehicle. Rubber blocks hold strap in position over tires. Able to use this strap on lower vehicles where a tire bonnet does not work… Great product overall.


Great product. Fast shipping and easy installation. If you are tired of having to lay on your back and side your self under your car to strap it down, this is a great alternative. Ordered the EM58523 and EM19148 for my open trailer and worked perfect.

Etrailer Expert

Mike L.


Nice car!!

Kurt P.


First off, I appreciate you following up. The Erickson Tie Down Straps works great. Even though I dont have the Chevelle anymore, but when I did use the straps , they worked great.


Bought these e track straps 1year ago. They work great. We tow high end cars like Ferrari, Maserati, we also do your every day cars. We highly recommend these straps.


The reason I only give this product two stars is because the first time I used the straps the roller broke. Contacted etrailer and was told they would not replace item. Here is some pictures.


Great way to tie down my classic Mustang. Bought extra ones on this purchase in case one gets damaged. The etrack attachment is quick and simple. The low profile checks make positioning the car in proper position easy, no guesswork. Great service from etrailer. I have made several trailer related purchases from etrailer. Recommend them for all your trailer related needs.


Installation of the E-Track is fairly simple. Just use every available cross member and surface mount the remaining every other hole is what I could best. I doubled up close to the ends. Straps are self explanatory. Quality products.

Used for auto transport.



I love these straps. I had to remove the rubber blocks for my application but they popped right off and can be put back on any time.


I LOVE these straps, I've used them on everything from a side by side to a 2500 truck. They're cheaper than buckets, however they work just as well. All of the parts are very good quality.


Must have for pulling cars, wont go back. These are high quality and worth it over the low end cheap stuff.


Excellent products!! Very happy with the straps.


Nice tire straps, always great service ..... thanks guys !


Good quality. A little long for atv tires. Worked well.


Works great! Easy and fast to secure my RZR on trailer


Tying a car down by the wheels is the least-bad option I've found, and these straps are the best tool for that job.

Tying down the wheels tends to shift and loosen less during transit than tying to the frame, and I feel like it's less likely to mess with the alignment than tying to a suspension hard part.

If you have an open trailer you can stand next to rather than cramped inside while working, you'll like these even better than I do.



First year of service has been flawless. No complaints.


Great product, quick delivery. Erickson E-track Wheel Strap With Roller Idler And Ratchet. Had part of one of my straps missing. They were quick to replace the item with no problems. Great customer care service.


Jeff F.


Thanks Laura, The straps and e-track worked great. I installed them in a 28 enclosed trailer to haul my show cars.


Surprisingly stiff. Using these on a ramp truck using an 1/8" aluminum tread plate deck. There is a sizeable gap over the tires that I was afraid would flex when rolling a car over it. Using these tracks across that gap, I felt no flex when loading the car.

Consider me impressed. Had to make a couple custom holes to fit my framing, but nothing difficult at all to do.


Great straps, if you are strapping down a car on E track these are the best I have found. Bought some from somewhere else and they are not as good as these. Two important things to do 1 make sure the bolt is all the way tight in the shackle so it wont pinch the webbing and 2 put a wear sleeve on the webbing where it goes though the shackle as well


Work great.


Products performed just like they said it would. The straps fit perfectly over my 48 Chev Sedan Delivery so I didn't have to worry about them rubbing on the whitewalls like the other style would have done. Items in stock shipped right away and company communicated when balance of order was shipped. Great customer service and products. Thank you



Still great!


Searched for months trying to find a way to tie down my Goldwing Trike in its garage on wheels. Found this combination on etrailer and it works fantastic!! Safer than any other way of tie down ie, using frame or triple tree. just strap both rear wheels to e-track that is firmly mounted to your trailer and tie down the front wheel to keep it from bouncing, also. Great product.


I wish I had found and installed these tie down straps originally. These tie down straps work so much better and are easy to strap the car down and go and not worry about loosening up

Bruce M.


great quality product


The e-track tie downs were seriously one of the best purchases I’ve made. I have a 72 corvette that I haul to shows and other places. It’s a nightmare to try to tie it down with just straps. The e-track system made it easy. I also use it to tie down my commercial mower. I highly recommend this product


Perfect for what I need them for

Show More Reviews

See what our Experts say about this Erickson Car Tie Down Straps

  • Installing Erickson E-Tracks for Use on Car Hauler Trailer
    If you are looking to use Erickson E-Track on a car hauler trailer you do not have to flush-mount the tracks. They can be secured to the trailer's decking with fasteners appropriate for the decking material (a minimum of 2 fasteners per linear foot on each side of the E-Track). It is perfectly okay to have the tires rest on the tracks since they are each rated for 6000-lbs. We offer the Erickson E-Track Wheel Tie-Down Strap # EM58523 that you can use with the tracks.
    view full answer...
  • Can E-Track Be Used To Secure a Car in a Trailer?
    Yes, you can use Erickson Horizontal E-Track item # E19148 as front straps to hold down a car. These tracks have a 2,000 lbs maximum capacity per track. You will want to use the etrailer E-Track Backing Plates w/ Hardware item # e96RR for mounting. The included hardware lets you mount your E-track on surfaces up to 2" thick. To strap your car down you will want to use the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet item # EM58523.
    view full answer...
  • How Long is Ratchet Portion of Erickson E-Track Wheel Strap # EM58523
    I checked with Erickson and they confirmed that the strap length on the ratchet side of the Erickson Wheel Strap for E-Track # EM58523 is 5-1/4 inch.
    view full answer...
    Image 1 for
  • Recommended E-Track Setup For Securing Side-By-Side In A Travel Trailer
    If you plan to use the track exclusively for securing a side by side, I do recommend using E-track for this purpose. It will be plenty strong to support a side by side, and you will be able to get wheel chock and tie down kits that will work nicely. You can either use a few long continuous section of e track like the # e52VR which is 94" long, or you can do individual smaller sections like the # EM59150 which is 2 feet long. Personally I would prefer the individual smaller sections. They...
    view full answer...
  • Could the E-Track Wheel Straps Be Used on Tracks That are too Narrow/Wide for Vehicle Wheels
    Ideally the Erickson E-Track Wheel Tie-Down Strap # EM58523 would be used on vehicles that the wheels line up centered on the E-tracks. However, there should still be a way to attach to wheels that are a little too narrow or wide. If they are too narrow for the tracks you could take and route the straps through the spokes of the rims, or if the tracks are too narrow for the wheels you could route the strap around the wheel, through one spoke, and then out through another spoke of the wheel...
    view full answer...
  • Securing a Jeep Wrangler with 35 Inch Tall, 12-1/2 Inch Wide Tires to E-Track
    The E-track tire strap # EM58523 is 12 feet long so it would fit. You could also use an E-track D-ring # E59143 witch an axle strap, # 58505, and ratchet strap # 58503. The D-Ring will attach to the E-track. The axle strap will loop around the Jeep axle, and the ratchet strap will hook to the D-Ring and the loops on the axle strap.
    view full answer...
  • Should Erickson E-Track be Installed Directly Under Tires of Vehicle
    The Erickson E-Tracks like # E19148 can really be installed any way you like on your trailer, but most customers tend to install them so they sit directly under the tires of the vehicle they are securing. This will allow you to easily use Tie-Down Straps like the Erickson # EM58523, which feature one hook in the front of the tire and one hook behind it. This will provide a really stable connection when transporting your JD Gator. I have attached an image that shows this type of setup...
    view full answer...
    Image 1 for
  • How Many Erickson E-Track Wheel Tie-Down Strap # EM58523 are Needed to Secure a Vehicle
    It's pretty common to only secure one axle on a vehicle with the Erickson E-Track Wheel Tie-Down Strap # EM58523 that you referenced. I would pull your vehicle on to the trailer. You'd be better off having the weight of the vehicle engine further forward than back since trailer sway is typically caused by not having enough tongue weight.
    view full answer...
  • Should Erickson ATV E-Track Tie-Down Kit be Used on All 4 Wheels of 1,936 Pound Polaris Ranger
    The 1,500 pound working load limit (WLL) for the Erickson ATV E-Track Tie-Down Kit # EM09160 referenced in your question does refer to the combined capacity of both straps and chocks. Since your Polaris Ranger weighs close to 2,000 pounds, I do recommend using two of these sets to secure all four of its wheels to the trailer. This tie-down kit will provide you with 4 wheel chocks and 2 ratchet tie-down straps for securing 2 wheels. The ratchet straps feature E-track fittings that will...
    view full answer...
  • Can Erickson E-Chock be Used on a 1994 Land Cruiser with 37 Inch Tires
    You could use chock # EM09162-2 with a wheel strap such as # EM58523 but considering the size of the tires on your 1994 Land Cruiser rock crawler I would not use this as the primary method of securing the vehicle to the trailer. I like the idea of using the chock as a chock and still using axle straps much better.
    view full answer...
  • Recommendation For Straps To Use With E-Tracks In Enclosed Car Hauler
    I contacted the manufacturer and Erickson straps, Item # EM58523, as well as all of their straps like Item # 77314 are not to be attached/put on a hold position at an angle. They must go straight "up and down" per installation instructions to be effective. Generally speaking, the same holds true regarding installation of straps when using an E-track system. Contact us if you have other questions.
    view full answer...
  • Determining Spacing of E-Tracks for Vehicle Transport
    I really wish there was an easy answer as to a safe track spacing with the Erickson E-Tracks # EM59150 to accommodate most vehicles, but the truth is that there are just too many possible widths to comfortably answer this without actually figuring out the tire widths on the particular vehicle you plan on hauling. Your best option is really to figure out the tire width on your vehicle and install the tracks accordingly on the trailer. The Erickson Wheel- Tie-Down Strap # EM58523 that you...
    view full answer...
    Image 1 for
  • Where Should Horizontal E-Track Be Positioned on the Inside of an Enclosed Trailer
    One of the great things about E-Track is that you can mount it pretty much anywhere you want (as long as there is adequate support). Ideally you would mount the E-Track to a surface with the most support so if there is a horizontal support structure that runs the length of the trailer that is where I would put it. Otherwise I would say about 3 feet up from the trailer floor would be a good spot. That is about waist high for the average adult male. If there is not enough support in the...
    view full answer...
  • Best Tie Down Method for Transporting Luxury Vehicles
    The best way to secure you Ferrari F430 to a trailer will involve an E-Track system. For this you are going to want a few items. First you will want a set of tracks like the Erickson Horizontal E-Track part # EM19147. You will want four of them, one under each wheel. You will then want to use a set of tie-downs compatible with these tracks and for that the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet part # EM58523 will be your best option. You will again want a...
    view full answer...
  • Wheel Strap Recommendation for Smaller Vehicle with Limited Tire Clearance on Trailer
    For your application I would strongly recommend going with the Erickson E-Track Wheel Tie-Down Strap # EM58523 as it only touches the tread and due to it's design works great with limited clearance since the ratchet can be positioned out and away from the vehicle on the E-track. In the picture I attached you can see it used on a newer Camaro with very limited clearance. It will be a very secure fit as well. We don't have an install video for the strap though at this time. You'll need...
    view full answer...
    Image 1 for
  • Will Adjustable Wheel Tie Down with E-Track Fittings Fit 13 Inch Tires
    You shouldn't have any problem getting the adjustable wheel net # EM58523 on a 13 inch tire. The strap is 12 feet long and can go as small as needed.
    view full answer...
  • E-Track Chocks and Tie-Downs for 32 Inch Tires on a Side by Side
    We don't have a kit for 32 inch tires but you can use a few short sections of E-track such as # EM19145 or # ET4S with Erickson E-Track Wheel Tie-Down Strap # EM58523. And you could add a couple of chocks for E-Track using # EM09162-2.
    view full answer...
  • Recommendation on the Number of Tie-Down Straps Needed When Securing Vehicle Using E-Track Rails
    You will be able to secure your ATVs to your trailer using two Erickson E-Track Wheel Tie Downs. # EM58523, on two wheels of each one of your vehicles. These Erickson tie-down straps will connect to an E-track rail, like the Erickson 4 Foot E-Track Section # EM19147, to allow you to safely secure your ATV to your trailer. The straps measure 12 feet long and will have plenty of length to fit the 31 inch tires on your Polaris RZR. I have attached two product review videos of both the Erickson...
    view full answer...
  • Erickson E-Track Tie Down for a 33 Size Tire
    Although we don't have any kits for a 33" tire you can use the 2" x 12' Erickson E-Track Wheel Tie-Down Strap # EM58523 along with the Erickson E-Chock Wheel Chocks # EM09162-2 to essentially create your own kit. The tie down strap has a safe working load limit (WLL) of 1,100 lbs and a maximum load (break strength) of 3,300 lbs. These install in the Erickson E-Tracks like part # E19148.
    view full answer...
  • Can E-Track be Installed in Car Hauler for Multiple Car Widths
    You can install the Erickson Horizontal E-Track # E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track is only 5-1/8" wide so you can install numerous different tracks to meet as many widths as possible. For additional support I do recommend using the E-Track Backing Plate # BPEZ during your install. This would be the best option and then you...
    view full answer...
    Image 1 for
  • Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-Track
    You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track # EM09162 (this is a quantity of one strap but can be ordered in a pair at part # EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523. For a kit I recommend the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel...
    view full answer...
  • How Far Apart Are Mounting Holes For Erickson Horizontal E-Track EM19147
    The mounting holes are 2 inches apart, and to ensure its full capacity we do recommend screws in every mounting hole for the Erickson Horizontal E-Track # EM19147. While we do not have the mounting hardware, the mounting holes are 1/4" diameter, so that's the size you'd want, with the correct length depending on how thick your wooden planks are; just be sure to get wood screws which I'm sure you knew but I just wanted to be thorough for you. This will work great with the Erickson E-Chock...
    view full answer...
  • Parts Needed for Erickson ATV E-Track Tie Down to Carry RZR with 35 Inch Tires
    I have a solution for you, but the straps that come with the # EM09160 will only safely fit up to 30 inch diameter tires. There's not a complete kit available that will work, but you can add the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523 to replace the straps in the # EM09160 and they'll allow you to secure your RZR with 35 inch tires.
    view full answer...
  • Best Way To Secure a Vehicle To a Trailer
    The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer Horizontal E-Track part # e42VR and then use the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet part # EM58523. If you don't want to install tracks then you can use the traditional style, the SmartStraps Ratcheting Wheel Net with Snap...
    view full answer...

< Previous

Do you have a question about this Car Tie Down Strap?

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Jacob H
Installed by:
Jacob H
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Alex H
Updated by:
Alex H
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Written by:
Mary K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.