See what our Experts say about this etrailer Accessories and Parts

• Parts Needed to Install 7-Way and Brake Controller 2024 Toyota Grand Highlander
  We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part # RED24FR with the install harness part # RED69FR. As this controller puts only a small knob on the dash of your vehicle and works really well using an inertia sensor to sense how hard to apply the trailer brakes. You will also need the 7-way kit part # TK57VR that its your vehicle which also comes with brake controller...
  view full answer...
• Where Do the Wires on the Universal Install Kit for Trailer Brake Controllers Get Installed?
  If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector # ETBC7 is meant to be used on vehicle's that don't have an existing 7-way and need to add one. However if you were adding a 7-way then you'd need to route the blue wire to the output on your brake controller, and run the yellow wire to the reverse light circuit. If...
  view full answer...
  
• Hitch, Weight Distribution and Brake Controller Recommendations for a 2017 Toyota Sienna XLE
  We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the vehicle. A great Class III hitch would be the Curt # C13105, which is rated for weight distribution and has been given a nearly 5-star review on our site by the over 500 customers that have rated it. As for a brake controller, the wireless...
  view full answer...
  
• Difference Between Curt & Draw-Tite Trailer Hitches For 2018 Jeep Wrangler Unlimited
  Hi Ken, Starting with the wiring harness, I can verify for you the correct fit for the 2018 Jeep Wrangler Unlimited without a tow package is indeed the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786. Then for the hitches, the biggest difference between the Curt Trailer Hitch Receiver # C13392 and Draw-Tite Trailer Hitch Receiver # DT78MR is the length of the receiver. The Draw-Tite has a shorter receiver that can make it a bit more of a pain to add a ball mount...
  view full answer...
• How To Know If Your 2021 Hyundai Santa Fe Has A Factory Tow Package
  I recommend tracing the wiring from the 4-pole connector back to see if it plugs into a connector or if it's hardwired to your tail lights before purchasing anything. The wire harness would get all the signals right at the tail lights if it was hardwired in, but if it has a connector that plugs into a factory connector in the vehicle then you have the tow package and can just use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C68JR instead of having to splice in the...
  view full answer...
  
• Picking Between ETBC7 and ETBC7L for Brake Controller Install
  Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part # ETBC7 if I were you. The # ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has everything and then if you need the additional parts to install a wired controller you'd have them.
  view full answer...
• What Wiring do I Need to get My 2022 Toyota Highlander Ready for Redarc Tow-Pro Brake Controller?
  Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the # ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip your vehicle for a brake controller, you’ll first need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99FR. This is fairly simple to install, with the most challenging part being the removal of some paneling to access...
  view full answer...
• Electric Brake Controller Recommendation for Semi Truck for RV Trailer
  For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well. All this needs is access to a stoplight...
  view full answer...
• Correct Trailer Hitch Receiver for 2022 Ram ProMaster 3500 With Long Wheelbase
  Since your 2022 Ram ProMaster 3500 has the extended 159" wheelbase you'll need to go with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76050 instead of the Hitch # 75882 you're looking at. Over the years we've found that the 75882 has issues with a driver side bolt cutout and the spare tire release on the extended wheelbase ProMasters which is why that exclusion exists. The 76050 that does fit has a completely different mounting bracket design so the installation isn't a problem....
  view full answer...
• No Trailer Connection on Tekonsha P3 Brake Controller 90195 on a 2000 Toyota Tundra
  I would start by inspecting the connector on your trailer and the vehicle to make sure there is not corrosion in the connector which could be causing a bad or weak connection. If there is corrosion in the trailer side connector, you would need to replace it with 7-way Connector, part # A7WCB. For the replacement vehicle side connector, you would need Adapter 4 Pole to 7 Pole, part # 30717. For future use, I would recommend using Dielectric Grease for Electrical Connectors, part # 11755,...
  view full answer...
  
• Will the 7-Way RV Upgrade Kit ETBC7L Charge the Trailer Battery When Using Curt Echo
  The 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part # ETBC7L and the Universal Installation Kit for Trailer Brake Controller part # ETBC7 will both still charge your trailer's battery even when using the Curt Echo Mobile Trailer Brake Controller part # C51180. The onlybdifference between these two kits is that the latter comes with extra wires and circuit breakers which are needed for a in-cab brake controller but you could still use this with the Curt Echo as well if...
  view full answer...
• Complete Towing Setup With Brake Controller for 2025 Honda Odyssey
  Hi Mike! Do you want a completely hidden hitch or one where only the receiver is visible? The Curt # C64NR you looked at has a concealed cross tube so you will only see the receiver hanging down at the rear. The Hidden Hitch by Draw-Tite # DT76GR will also work and has a completely removable receiver when you aren't towing. If you decide to get the Hidden Hitch you will also need the Quick Links for Safety Cables # RM-910022. The next thing you need is wiring. Curt T-Connector Vehicle...
  view full answer...
• Custom Brake Controller Wiring Harness for 2019 Jeep Grand Cherokee and Installation Location
  For your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3 # 90195 then you will use # TK93VR for your wiring harness. If you are using a Curt controller like # C74VV you will use harness # C51446. Finally if you are using a controller like the RedArc Tow Pro Elite # RED44FR, then you will use the pigtail...
  view full answer...
  
• Parts Needed to Install 7-Way and Brake Controller on a 2024 Subaru Crosstrek With Factory 4-Way
  Yes, our 7-Way Kit # ETBC7 will connect into your factory 4-way on your 2024 Subaru Crosstrek. This means you will not have to splice into the tail lights. The kit does include universal wiring for both a charge line and Brake Controller # RED52VR which will require you to connect to the battery and splice into the brake switch since your Crosstrek does not have a factory plug and play option for the brake controller.
  view full answer...
• How to Pick Out Brakes for 3,500 lb Boat Trailer with Tandem Axles
  Installing brakes on a trailer really isn't too bad. The install is pretty basic and a DIYer like yourself wouldn't have a problem at all. To determine the parts you need though we need to for sure know what axles/spindles you have so that we pick out the right parts. I attached a couple guides for that down below for you to check out. There are a lot of boat trailers that have great results with electric drum brakes so if that's a route you are interested in that's what I would recommend...
  view full answer...
  
• Location of Factory Wiring Connector for 2021 Ford Explorer Limited
  Hello Ken; what wiring harness are you trying to install? Do you have the factory tow package on your 2021 Ford Explorer? If you don't have the factory tow package there won't be a wiring connector at the rear of the vehicle. If you have the factory tow package there will be a plug behind the bumper that attaches to the # HM40975. If you do not have the factory tow package you need to install the Curt 4-way # C56093 which plugs into the connection points in the rear cargo area as seen...
  view full answer...
• Recommended 7-Way Trailer Wiring On 2007 Ford E-350 Super Duty Van
  If you don't already have a 4-way wiring harness, we need to start there to get your 7-way. For a 4-way, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56020 which plugs in behind the tail lights of your 2007 E350. You will have to remove the tail light assemblies and interior trim paneling to access the factory connections. I've attached a video to help. Then you will use the Universal Installation Kit for Trailer Brake Controller - 7-Way...
  view full answer...
• Trailer Hitch, Wiring, & Brake Controller For 2024 Chevy Blazer EV
  Hi Joann, We actually sell all the parts you're looking for to tow with your 2024 Chevy Blazer EV, and I'll go ahead and list out the exact parts you need for this: - Curt Trailer Hitch Receiver # C63ZV - Curt T-Connector Vehicle Wiring Harness # C44FR - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Redarc Tow-Pro Liberty Brake Controller # RED52VR This is all you'll need, as the T-Connector gives you the 4-way, and you'll then plug that into the 7-way that comes...
  view full answer...
• Alternative 7-Way Connector for the Kia R0F67 AC600 on a 2025 Kia Carnival
  No, I do not Paul and I doubt Curt or Draw-Tite make anything other than a 4-way for the hybrid model. Aftermarket wiring harnesses for vans are typically limited to 4-way connectors like the item # C63RV for LED lights or the item # C32MJ for incandescent lights. I checked with Curt and these are confirmed to fit the 2025 Kia Carnival Hybrid. To add a 7-way connector you would also need the Universal Installation Kit item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector...
  view full answer...
• Complete Tow Package for 2020 Honda Pilot to Tow 5,000 Camper with Brakes, Hitch, Wiring, Ball Mount
  Hello Lewis, I can definitely get you set up with the correct towing components to get you out on the road to adventure! You’ll want to check your owner’s manual to see what Honda says you can tow, just because the hitches are rated that high doesn’t mean you should be towing that much weight. - Hitch: Just as long as your camper is no more than 5,000 pounds, a Class IV isn’t necessary. I would go with our etrailer Trailer Hitch Receiver - Custom Fit Class III - 2" # e44AR. I really...
  view full answer...
• Recommended Tow Wiring Harness for a 2025 Kia Telluride
  Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C29ZV Without LED Lights - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C93FV Both of these custom-fit T-connectors plug into your Kia's wiring harness, which...
  view full answer...
• Trailer Hitch Recommendation for 1989 Ford F-250 XLT Lariat with Deep Drop Bumper
  Thank you for the photo! What you have there is a deep drop or "cowboy" bumper. So, for a 2 inch trailer hitch that is confirmed to fit your 1989 Ford F-250 XLT Lariat with the deep drop bumper, I recommend the Curt # C15511. This 3-piece trailer hitch receiver is specially designed for heavy-duty towing. This is a multi fit hitch, so drilling is required to bolt it onto your truck's frame, but it will fit both 34 and 37-1/2 inch frames. It has a 15,000 lb towing capacity and a 1,500 lb...
  view full answer...
  
• Adding Electric Brakes To 2,200lb Dexter Torsion Axles
  It is possible to weld on a brake flange such as Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34 for 1-3/4" round axles, but it takes a qualified welder and even then it can be difficult to accomplish. A better solution is to upgrade your current axles with something like Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Regular Tires - 2,200 lbs # ASR1THDS01, or if you need lift spindles you can go with Timbren Axle-Less Trailer Suspension System -...
  view full answer...
  
• Brake Controller Wiring for Ford E-450 Motorhome
  If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item # 3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450 vehicles, the plug is located behind the storage compartment above the radio. Once you remove the storage compartment, you can plug in the adapter and run the cord behind your dash to the brake controller. I've attached several images showing where...
  view full answer...
  

Do you have a question about this Accessories and Part?