Search: class 5 ball mount   >  

We have the exact cover you need to keep the dirt out of the gooseneck hole in your Chevy Silverado with the OEM puck system; the one that fits is from Reese, and is the following part number: - Rubber Hole Cover for Reese Elite Series Under-Bed…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

I spoke with my contact at Reese and as long as you are using the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item # RP45292, at the 24 inch extension length, there are no stabilization chains or cables required. Since your trailer is…

The weight is pretty similar between the aluminum Torklift camper tie downs part #TLF2022A and the steel part #TLF2022 which is 4 lbs heavier at 39 lbs vs 43 lbs.

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF2021A and TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF3008A are designed to work with a running board or step underneath the bed so you should have no issues with your factory…

There is a difference in price between the steel TorkLift Custom Frame-Mounted Camper Tie-Downs and the ones that are made from aluminum that fit your 2019 Ford F-250 Super Duty with a 6-3/4 foot bed, no boards or steps under the truck bed and either…

The strongest camper tie downs for your 2022 Ford F-350 short bed without boards and a factory hitch is the Torklift tie downs #TLF2022A and #TLF3008A which are made from aluminum and stainless steel. This also means that it would never rust or…

Of the two part numbers you mentioned only the #TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type #TLF2022 which is the non-aluminum/stainless steel option…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

Yes, the Roadmaster Exact Center Steering Stabilizer #RM97MR is the correct steering stabilizer for your 2023 Thor Chateau and a 2023 Ford E-450 chassis. You will need the Mounting Bracket #RM37MR as well to fit your chassis. We do have this also…

Thanks for reaching back out and pointing out the video you found that in! I checked out the video you referenced about the Roadmaster Rear Anti-Sway Bar #RM-1139-147 install on a 2019 Ford E-Series Cutaway (see linked) and while Ryan did ultimately…

For your 2017 Thor Axis Class A Motorhome, I recommend adding front and rear anti-sway bars to help control your coach. The Roadmaster Front Anti-Sway Bar, #RM-1139-176, and Rear Anti-Sway Bar, #RM-1139-147, will help reduce sway to improve overall…