Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Robert! If your trailer has 10" brake drums with a 5 on 4-1/2 bolt pattern, there's a good chance you have 3,500 lb axles. I can't say for sure based on the trailer year and model alone, so you will need to confirm this. If they are…
view full answer...Hey Daniel, yes the Hydrastar actuator part #HS381-8067 that you referenced would run continuously once the pin of the breakaway has been pulled. This is why a battery is part of the breakaway system as it needs that to power the system. Also, yes…
view full answer...Yep, the tire is the KR03 model on the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D #AM32424.
view full answer...Hey Steve, since trailer wheel and tires aren't normally balanced none of the wheel and tire combos we carry including the part #KE32EV are balanced. BUT we can help as we do have balance beads like with the part #CA66VR which allow you to easily…
view full answer...Hey Grady. So long as your 2024 Ford Ranger came with the factory tow package, that included the brake controller plug, the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED67CR is exactly what you'll need. The plug you need to…
view full answer...Each lamp needs to be grounded either through its mounting studs being in direct contact with the trailer frame or by having a jumper wire ran from the lamp to the trailer frame. Ground the trailer connector at the front of the trailer, which will…
view full answer...The first thing I recommend doing is to check that the ground wire for the lights is securely attached to a clean metal surface on the trailer frame. A loose ground wire will keep the lights from working. If the ground attached to the trailer does…
view full answer...Basically you will want to compress the spring part #BD500354 so that you can position it in place on your Bulldog Coupler. I attached a picture that shows where the spring installs at. It will just be a matter of compressing the spring to get it in…
view full answer...If you already have a breakaway switch and trying to find its power source, It is possible that someone could have wired the breakaway switch directly to the main battery on the trailer but it does not come like that from the factory. The breakaway…
view full answer...Hey Uriah, thanks for reaching out! The Tradesman Vaquero Self-Contained Hydraulic A-Frame Trailer Jack #ST86FR will work best if it's hardwired to a battery on your trailer, but you can also hardwire a 7-Way plug and lead like part #H20043 and…
view full answer...No, the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 does not come with a break-away battery. But, is compatible with any standard, 5-amp-hour-battery breakaway kit like the Bright Way Push-to-Test Trailer…
view full answer...You have to have a breakaway battery kit like the Curt #C52028 for the breakaway brake function on your trailer. This is one of the things that the highway patrol will actually check for to make sure that you are pulling your trailer safely. The…
view full answer...