Search: Locking Pin   >  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your Ford F-550 with a CM SK model flatbed, you are limited as to the adapters that will work. Because your ball is recessed 2 inches, the space around that may or may not allow for an offset. I have a couple options for an offset adapter. The…

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

The Equal-i-zer Weight Distribution System part #EQ37100ET and Blue Ox SwayPro Weight Distribution System part #BXW1000 are both great options. However, in regards to combating trailer sway the edge has to go to the Equal-i-zer because it has true…

To secure the B&W Tow & Stow 3-Ball Mount #BWTS10048B you will need the InfiniteRule Locking Pins #34061775-D. These pins are all lockable with a 42,000lb sheer strength. It will allow you to remove all the included pins which come with the…

I checked with our vendors and we do have an air bag kit for the PowerBoost model 2021 Ford F-150 4WD. It is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL54JQ. These have a 5,000 lbs weight capacity which will be more than…

We do have a variety of straight tongue couplers that fit with a 2-5/16" hitch ball like what you're looking for. We have standard couplers like the Demco #DM13203-95 as well as hydraulic actuator couplers like the Demco #DM8101801. I'm…

The DeeMaxx Disc Brake Kit #DE82FR with the Maxx coating has a salt spray rating of over 1,000 hours while the DeeMaxx Disc Brake Kit #DE54VR with the Stainless construction isn't rated for salt spray, but when I spoke with the owner he said the…

The B and W Tow N Stow ball mount part #BWTS10048B would be a great option for you. It's adjustable in height, comes with all three popular hitch ball sizes and has a 10k capacity which would be way more than you'd need.

I'll start off by saying that it's a bit unusual that your Ford Super Duty truck receiver is lower than the trailer you're towing, so if those measurements are accurate then you'll need a ball mount with a 2 inch rise. If you're…

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…