Will Air Lift 1000 for 2025 GMC Acadia Fit 2025 Chevy Traverse
Updated 03/02/2026 | Published 02/18/2026 >
Products Featured in This Question
Question:
Do these fit a 2025 Chevy Traverse High Country? AWD I see they are compatible with the 2025 GMC Acadia which I believe has the same coils same part number
asked by: Dennis
Expert Reply:
Hey Dennis! The Acadia and Traverse do share a lot, but the coil springs are different which means the # AL99PD will not fit your 2025 Traverse High Country. You may be able to use the universal springs like # AL60909 but you will need to measure to find the right fit.
First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height of your coil spring, which will be from the upper spring seat to the lower spring seat. Lastly, measure the inside diameter of the spring at its widest point.
Once you have your measurements, you can use the table below to choose the right kit. Since the air spring cylinder will inflate, it's okay if the cylinder is slightly undersized compared to the size of the coil spring. You will need to search for the part number once you find the best fit.
Product Page this Question was Asked From
Air Lift 1000 Universal Air Spring Kit - Rear
- Vehicle Suspension
- Towing/Load Leveling
- Air Springs
- Suspension Only
- Light Duty
- Rear Axle Suspension Enhancement
- Air Lift
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: sumosprings rear
- Shop: Demco 2-Bolt Channel Mount Coupler Hardware Kit
- Search Results: lock
- Search Results: padlock
- Search Results: 2 x 2 trailer tongue
- Shop: Suspension Enhancement
- Q&A: Which Hardware Kit For Demco Trailer Coupler # DM88XR
- Shop: InfiniteRule Trailer Tongue Latch Lock for Posi-Lock Couplers - 1/4" Pin - 3/4" Span
- Search Results: torque wrench
- Video: Review of Demco 2 Bolt Channel Mount Coupler Hardware Kit - DM68UV
- Search Results: chain lock
- Search Results: locking pin
- Shop: Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Black - 2" Ball - 10,000 lbs
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Video: Easily Install Your Redarc Tow-Pro Link Bluetooth Brake Controller - 2023 Jeep Gladiator
- Shop: Hardware Kit for Demco Adjustable Channel Mount Couplers
- Q&A: Looking for Air Lift 60904
- Shop: PingMaster 3000 Wireless Trailer GPS Tracker with WiFi Backup
- Video: All You Need to Know About the Hardware Kit for Demco Adjustable Channel Mount Couplers
- Shop: etrailer Lock Set - 2" Hitch Receiver Lock, 2-5/16" Surround Coupler Lock, and Latch Lock
- Shop: Brake Controller
- Video: Detailed Breakdown of the Air Lift 1000 Air Helper Springs for Coil Springs-AL99PD
- Q&A: Can the Thule Outset Hitch Mounted Tent Handle the Highway Speeds on My RAV4?
- Q&A: Will Installing The SumoSprings CSS-1094R On A 2020 Subaru Ascent Lift The Rear When Unloaded?
- Q&A: Will CSS-1094R Coil Sumo Springs Help Reduce Rear End Sag From Trailer Tongue Weight
- Q&A: Will Hardware Kit for Demco Adjustable Channel Mount Couplers Fit Flat Plate Demco Coupler
- Q&A: Can I Tow A Trailer When Transporting The Thule Outset Hitch-Mounted Tent?
- Video: Review of Dexter Adjustable Trailer Coupler - Channel Mount Coupler With Low Profile Latch - DX48CR
- Video: Comprehensive Review: Channel Tongue Trailer Coupler
- Video: Demco Trailer Coupler Feature Review




Dennis
2/24/2026
Thank you! What am I going to do about the jounce stops inside the coils? Are they easy to remove? For what it is worth: I looked at the parts diagrams for Acadia and Traverse at my local Chevy Dealership. They confirmed that it is the same coil same parts numbers and everything (the whole rear suspension assembly is the same according to them).