Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this…
view full answer...For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator #DX27FR. The swing-away actuators like your old A60 have been discontinued, along with replacement parts, so this is the best solution. This features a 7,500 lb trailer capacity,…
view full answer...The Redarc In-Vehicle BCDC Battery Charger part #331-BCDC1225D is designed to charge an auxiliary battery using the starter battery in your vehicle. Most people use the setup to charge their trailer battery with the vehicle's battery and a…
view full answer...In regards to the Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101, Fulton does use the gross trailer weight rather than the actual trailer weight for their max pivot length. I can't recommend going against this but I would assume they…
view full answer...The center grooved diameter of the Yates Keel Roller for Boat Trailers #YR12244-125EC is 2-1/2" so your boat will be about 5/16" smaller than your current one, but keep in mind your boat is only going to be lower by a little more than…
view full answer...Thanks for the picture of what you have and the info you listed. The correct wheel you need is the part #AM20794 that you referenced.
view full answer...It is possible to lift your trailer. You can do this by moving the axles from being above the leaf springs to below the leaf springs. The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is…
view full answer...I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…
view full answer...That is an excellent question, and while I can see where you're coming from, the Timbren Silent Ride Suspension #TSR7000T05 is designed to maintain the integrity of the trailer frame so you won't have any issues with the frame resting on this…
view full answer...I do have an option for you but we don't really offer safety chain extensions as it's usually best to just replace the chains entirely with a longer set so you don't run into issues with capacity. The Safety Chain with 1/4" S-Hook…
view full answer...Safety chains on trailers should be crossed under the trailer tongue. The idea is that if the coupler pops off of the ball the safety chains will catch it so it doesn't drag on the ground. We have numerous safety chain parts available and I have…
view full answer...Related Searches
Filter Your Search
Contact and Help