Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I checked directly with Dexter, and from what I saw they have a measurement - taken from center of spring eye to center of spring eye - of 24.8", which is the same as our 24-7/8" measurement for the 7-Leaf Double-Eye Spring for…
view full answer...If ground clearance is your primary concern I have a great solution for you. Instead of a standard axle like the part #T3584F-EZ-8974 that you referenced you would want a Timbren Axle-Less system like the part #ASR35HDS02. This setup has the same…
view full answer...Yes, you can use Timbren Axle-Less Systems like the part #A35RD545E that you referenced for a tandem axle setup. You cannot use this setup for a triple axle though.
view full answer...We do offer 12 x 2-inch electric brake assemblies with a 4-bolt mounting flange. Dexter parts #23-106-09 and #23-105-09 are right- and left-hand brake assemblies that have dual mounting hole patterns, both 5-hole and 4-hole. These brakes are rated…
view full answer...Unfortunately, we do not have the 14” diameter x 2” wide braking assemblies you need for your trailer. I also did some searching online and could not find any replacement parts for you either. The only option I can offer you would be to replace with…
view full answer...The mounting holes (4 hole pattern) on Dexter brake assembly, #23-106-09, are 3.09 inches on center for the top two holes and 2.55 inches apart on center for the bottom 2 holes. Top to bottom they are 3.40 inches apart on center. The holes can…
view full answer...The difference is the mounting pattern. The Dexter #23-105-09, brake assembly that you have referenced will mount to either an AL-KO/Hayes 4 bolt or a standard 5 bolt mounting flange. The #23-105 just fits the standard 5 bolt pattern. Otherwise the…
view full answer...We do indeed have a shroud that will fit your Dometic Duo-Therm 600315.331 air conditioner: - Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 The #AT3308046006 is designed specifically to fit the 600315…
view full answer...If your leaf springs are already located above your trailer axle then the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 won't change anything as its designed to relocate axles from above the leaf springs to below the leaf springs.…
view full answer...If you look at your rear leaf springs, and see an extra leaf as shown in the diagram, you have the overload spring option. For a 1997 F350 with overload springs, you'd need the B and W Turnover Ball #BWGNRK1110. If your truck does NOT have the…
view full answer...If you could provide a part number on the old cap, that would help. If you cannot find that, then please provide us with the make and model of the RV and the make and model of the refrigerator so that we can find the vent cap you are looking for.…
view full answer...Sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the capacity of your trailer, and has the same bolt…
view full answer...Related Searches
Filter Your Search
Contact and Help