1. Trailer Leaf Spring Suspension
  2. Redline
  3. U-Bolts
  4. Axle Mounting Hardware
  5. Round Axle - 2-3/8 Inch
  6. 5-1/2 Inch Long
2-3/8" Round Trailer U-Bolts (Qty 2)

2-3/8" Round Trailer U-Bolts (Qty 2)

Item # SP01-040
lowest price pledge
Retail:$21.30
Our Price: $15.93
You Save: 25%
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.59 lbs
Quantity: 
Redline 3500 lbs Trailer Leaf Spring Suspension - SP01-040
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Lowest Prices for the best trailer leaf spring suspension from Redline. 2-3/8" Round Trailer U-Bolts (Qty 2) part number SP01-040 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (37)
  • Q & A (13)
  • Videos (2)
  • Photos
  • Why etrailer?

Redline Trailer Leaf Spring Suspension - SP01-040

  • U-Bolts
  • Axle Mounting Hardware
  • Round Axle - 2-3/8 Inch
  • 5-1/2 Inch Long
  • 3500 lbs
  • 1/2 Inch Diameter
  • Redline


Round Trailer U-Bolt
  • 2-3/8" Wide
  • 1/2" Diameter
  • 5-1/2" Long
  • Includes Lock Nuts
  • Torque:
    • Minimum: 45 foot lbs
    • Maximum: 70 foot lbs




Video of 2-3/8" Round Trailer U-Bolts (Qty 2)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for 3 Inch Round Trailer U-Bolts Installation

Hi there trailer owners. Today we're gonna be taking a look at red lines line of replacement U bolts. Round U bolts are commonly used to hold your leaf spring stack onto your axle. And if you're making any repairs to your trailer it's possible that the threads can get damaged where you can't reuse the U bolt. You might have to replace them in that instance, or if you had some sort of blowout or any other kind of damage where you might've had some damage that caused some issues with your U bolts here you may need to replace those as well. Over time if you've constantly taken these off they do stretch out over time.

So it is a good idea to replace them. If you've had several repairs done and remove them. The ones that redline have, offer slightly longer length. So that way you can ensure it's going to be a fit for your trailer. We also recommend these.

If you're gonna be adding accessories to your trailer and you need the additional length if that accessory goes under a U bolt we can see our factory U bolt here on the trailer We we're just working on if we wrap it around and we can see it only goes up about that high. This is about six inches in length. The new one here that we put on is about seven inches in length and it gives us the extra length that we needed to be able to install the mounting plate for the shock absorbers that we just installed on here. With our factory U bolt we'd have almost no threads here sticking out. So our nut would be able to go on but it wouldn't be able to be properly torqued with enough threads to ensure that it's gonna stay torqued in that position.

Today, we're showing off the three inch wide U bolts with a half inch diameter. These have a seven inch length, and we're gonna use those to get our comfort ride system installed but we have them available on all the various sizes. So that way you can ensure you got a replacement for your trailer. We have them down as small as an axle diameter of one and three quarters of an inch. That's going to be your 2000 pound axles all the way up to an axle that is five inches in diameter.

And that's gonna be your larger axles that are around 12 to 15,000 pounds. Now the diameter of the U bolts do change as the sizes go up.Your smaller ones that only are for the one and three quarter inch axles typically have a size of three eights and of diameter while your large ones, with that five inch wide axle length is going to have a diameter of a U bolt of about three quarters of an inch to ensure that it can handle that weight rating of that. Now there are a couple of different U bolts that do have an overlap. The three inch ones that we're using here also have another three inch version available. That's in a nine 16th diameter. So you want to just check your trailer and your old U bolt to make sure you're replacing it with one that's going to be accepted acceptable with the hardware that you have on here. Cause we wouldn't be able to take a nine 16th and slide it through these brackets because the bracket on here was designed for a half inch. Replacing your U bolt is pretty easy. The smaller your trailer is usually the easier it is. Those larger U bolts. You are going to need to have a little bit more strength required to remove and torque down the nuts ' cause they are typically a higher torque value for the larger the U bolt. When taking them off you wanna make sure your axle is properly supported. If you follow along with us, we'll show you an example of how to remove and swap out the U bolts. We'll begin our installation by parking our trailer onto level ground. Your driveway in most cases is a great spot and lifting it up and removing our wheels. You'll wanna Jack it up and support the frame with Jack stands. You have to get it high enough off the ground where your wheels are off the ground so you can get those pulled off. And once you've got those pulled off here you are set up to begin working. We're using a lift here on ours to hold ours up. But again, it's gonna be very similar at home. You're just not gonna have the cross beam with the lift. You'll have just these Jack stands here underneath your frame. Now the Jack stands that I've got here. These are just precautionary Jack stands that are underneath the axles because we're going to be taking the U bolts loose. And once we take those loose, the axle can drop down. But I also have my Jack here underneath the axle and I'm gonna be moving this Jack around and keeping it under the axle that I'm working on this 'cause the Jack stands are really just supplementary in case something happens. My Jack, where two something we're to happen to the Jack with a fluid leak out we got a Jack stand here to support it. So we're going to remove the nuts here on top to take these U bolts off, the U bolts that are on your trailer. Aren't gonna be long enough to accept the brackets for the comfort ride system. So we are going to be replacing these U bolts. You can get new U bolts here at etrailer. Once we get these off, we'll show you the new U bolts. We're using a three quarter inch socket to remove the nuts, they are gonna be on there little snugs if I have to start it by hand, and then your tool can zip it off easily the rest of the way. Now we've got these all zip loose. We can pull our U bolts out of there. They just pull down. They're usually a little bit stiff. So just kind of working back and forth and just pull downward, come out of there. You can also kind of rock the top piece here. sometimes that helps . If you pull it over like this you can kind of get a little bit of a bang motion on it. To help persuade it off of there. So now we've got our factory bracket out of the way. This is your comfort ride. Your shock bracket. You'll have four of these in the kit and they are gonna be specific to a certain location. So we've got them set out here for the axle. So this is going to be for the front axle towards the front. We want this bracket to be angled down towards our equalizer here. And we also want to make sure that the holes are flat facing towards the center of our trailer like that. And the one for the axle behind this is gonna face like this. So these brackets are gonna be angled like this, on the opposite side of our trailer we want the same story to be mimicked over there. So we'll take our bracket now we'll set it on top of our leaf spring you see there's alignment pin there that does line up with the hole in the bracket. We can then set our factory bracket right back on top grab our new U bolts. We'll go up through the bottom through our shock bracket and our factory one. And then we'll secure it with the new nuts that came included with the U bolts. We'll do the same thing with the other two sets of holes right over on the other side of our leaf spring stack. Once we got them all started we can go back and tighten them down. You do wanna kind of go back and forth to try and tighten them down evenly. So you have roughly the same amount of U bolts sticking up above each night. So now we'll torque our hardware to the specifications found in your instructions. And that completes our look at red lines line of replacement, U bolts..


Customer Reviews

2-3/8" Round Trailer U-Bolts (Qty 2) - SP01-040

Average Customer Rating:  4.9 out of 5 stars   (37 Customer Reviews)


- SP01-040
by:

Heavy duty 1/2" u-bolts. Helped with axle over to axle under swap with extra length in threads to spare.



- SP01-040
by:

Bought several parts to repair worn out suspension parts. etrailer didn't have the wet equalizer bolts that I ordered. They failed to notify me that they were out of stock, and were not expected to be delivered to them for another month from the manufacturer. After a week of waiting for notification the parts had shipped, I called etrailer and was informed of the delay. I then cancelled the wet equalizer bolts and had the remaining parts shipped. The order arrived within 4 days. All the parts that I didn't cancel were of satisfactory quality, and fit as they sholud have.



- SP01-040
by:

the product was for a Utility Trailer, both springs and U-bolts came well packed, the transaction online was flawless but, the 3 day delivery became a 4 day due to UPS being a little less then honest on the reason for the delayed delivery. I was up until 10pm putting the springs on for an upcoming vacation. Cathy in customer service was helpful trying to resolve with UPS but dealing with a large delivery service is difficult. Advice is while you can trust this vendor, trusting for prompt delivery can be iffy.



- SP01-040
by:

I rebuilt a 4 wheel trailer, brakes, hubs and one axle repair. All the parts I purchased fit as promised. After a year I have had no problems. Thanks



- SP01-040
by:

good quality replacement u bolts and nuts. (note you need to replace once the nuts have been removed because these have special treads that lock in the nuts)



- SP01-040
by:

This one is kind of easy but the products are as described, all parts are present and shipped fast. Good attention to detail like a light coat of oil to keep the parts from rusting while in transit. Heavy made part at a good price, I can fabricate parts but at these prices it's not worth my time and much easier to buy from companies like etrailer.



- SP01-040
by:

Good price, fit right. Had everything I needed to help me make my trailer safe again. Shawn worked with my two orders and linked them to get the free shipping.



- SP01-040
by:

Excellent product at a fair price with really fast shipping. But the best thing is the attention to customer satisfaction demonstrated by the folks at etrailer.com. They are truly focused on the customer!!!!



- SP01-040
by:

The folks at etrailer were very helpful and quick to provide measurements when I emailed. The u-bolts were exactly as described (threads are approx 2" long), nice quality product. Extremely quick shipping, too.



- SP01-040
by:

This company is a model as to how business should be done. From price to delivery and follow up communication it doesn't get much better. Now if we could just get more parts made in the USA I would really be happy, happy, happy.



- SP01-040
by:

They fit and work fine.



- SP01-040
by:

glad i found these i wanted to use standered bolt on my trailer



- SP01-040
by:

Perfect fit, Superior service as always.



- SP01-040
by:

Product just as advertised. And was shipped immediately and received on time.



- SP01-040
by:



- SP01-040
by:

great 5 star



- SP01-040
by:

Product came just as advertised. Great communication. Will buy from again.



- SP01-040
by:



- SP01-040
by:

Quick and accurate delivery. Product as advertised, gladly recommend to friends.



- SP01-040
by:



- SP01-040
by:

everything fit as it should, good delivery time



- SP01-040
by:



- SP01-040
by:

works great great shippers and price is right



- SP01-040
by:



- SP01-040
by:

+++++


25
37
Show More Reviews

Ask the Experts about this Redline Trailer Leaf Spring Suspension

Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.