Search: Complete Trailer Axles   >   !Trailer Tires and Wheels   >   A-Frame Trailer Coupler   >  

If ground clearance is your primary concern I have a great solution for you. Instead of a standard axle like the part #T3584F-EZ-8974 that you referenced you would want a Timbren Axle-Less system like the part #ASR35HDS02. This setup has the same…

I checked directly with Dexter, and from what I saw they have a measurement - taken from center of spring eye to center of spring eye - of 24.8", which is the same as our 24-7/8" measurement for the 7-Leaf Double-Eye Spring for…

Unfortunately, we do not have the 14” diameter x 2” wide braking assemblies you need for your trailer. I also did some searching online and could not find any replacement parts for you either. The only option I can offer you would be to replace with…

The mounting holes (4 hole pattern) on Dexter brake assembly, #23-106-09, are 3.09 inches on center for the top two holes and 2.55 inches apart on center for the bottom 2 holes. Top to bottom they are 3.40 inches apart on center. The holes can…

The difference is the mounting pattern. The Dexter #23-105-09, brake assembly that you have referenced will mount to either an AL-KO/Hayes 4 bolt or a standard 5 bolt mounting flange. The #23-105 just fits the standard 5 bolt pattern. Otherwise the…

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

The #42 E-Z Lube Spindle part #TRU37FR has a brake mounting flange which matches the industry standard of 5 on 3-7/8". I have attached a photo below.

With the 1/2 inch diameter wheel studs on your etrailer.com Idler Hub Assemblies #AKIHUB-545-35-K and the 15 inch steel wheels from the Loadstar Tire and Wheel #AM3S640DX, you are looking at a torque spec of 90-120 ft.-lbs for the lug nuts. I have…

We do indeed have a shroud that will fit your Dometic Duo-Therm 600315.331 air conditioner: - Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 The #AT3308046006 is designed specifically to fit the 600315…

The Reese Goose Box is not currently an available upgrade/change to the Rhino Box pin box. We do however have the Trailair Flex Air 5th Wheel Pin Box, #LC65VR that is. The internal air bag and built-in shock work together to cushion your ride,…

If your leaf springs are already located above your trailer axle then the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 won't change anything as its designed to relocate axles from above the leaf springs to below the leaf springs.…

To get an AC unit that has a start capacitor you're going to want to swap out your Carrier AC for the Advent Air Replacement RV Air Conditioner for Carrier Setup w/ Start Capacitor #ACCAR135. This will fit exactly where your Carrier fits so you…