Need 12 x 2-Inch Electric Trailer Brakes with 4-Bolt Mounting Flange

Question

Question:

i have a old old equiment trailer it has dexter axles and i am looking for complete assembles 12x2 but the backer plate has a 4 bolt pattern ?/

asked by: Andrew P

1

Helpful Expert Reply:

We do offer 12 x 2-inch electric brake assemblies with a 4-bolt mounting flange. Dexter parts # 23-106-09 and # 23-105-09 are right- and left-hand brake assemblies that have dual mounting hole patterns, both 5-hole and 4-hole. These brakes are rated for use with 6000-lb axles.

expert reply by: Adam R

1

Answer 1

If your current brake assemblies have a 4-bolt mounting pattern then you likely need the Nev-R-Adjust Brake Kit #23-468-469 (10") for 3,500 lb axles. Since the Brake Kit #23-464-465 (12") that you referenced has a 5-bolt mounting pattern it…

view full answer...

Answer 2

I attached a picture that has the bolt pattern of the brake assemblies part #23-105-106-09 that you mentioned. This is the standard offset AL-Ko style of 4 bolt pattern.

view full answer...

Answer 3

The mounting holes (4 hole pattern) on Dexter brake assembly, #23-106-09, are 3.09 inches on center for the top two holes and 2.55 inches apart on center for the bottom 2 holes. Top to bottom they are 3.40 inches apart on center. The holes can…

view full answer...

Answer 4

The difference is the mounting pattern. The Dexter #23-105-09, brake assembly that you have referenced will mount to either an AL-KO/Hayes 4 bolt or a standard 5 bolt mounting flange. The #23-105 just fits the standard 5 bolt pattern. Otherwise the…

view full answer...

Answer 5

Unfortunately, we do not have the 14” diameter x 2” wide braking assemblies you need for your trailer. I also did some searching online and could not find any replacement parts for you either. The only option I can offer you would be to replace with…

view full answer...

Answer 6

The 4-bolt brake mounting pattern is fairly rare in a 12 x 2 inch assembly. We have some options though; for 6K axles we have #23-105-09 for the left and #23-106-09 for the right. The 4-bolt pattern on these assemblies is offset meaning the bottom 2…

view full answer...

Answer 7

For your 12x2 electric brake assemblies, I recommend the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies #23-105-106-09. These assemblies will fit your 4 bolt flange and will work well on your trailer.…

view full answer...

Answer 8

The Dexter Braking Assemblies like the #23-464-465 are widely regarded as the highest quality assemblies due to them being manufactured right here in the USA and using the highest quality materials available. With that said we have sold a lot of the…

view full answer...

Answer 9

The #23-105-09 would work well since the dimensions and bolt pattern are correct for your Hayes 7k setup. Typically brake assemblies in this size will have weight ratings that range from 5,200 up to 7k so the #23-105-09 will work well as they match…

view full answer...

Answer 10

We do stock all types of replacement parts for electric drum brakes like the 12-inch Dexter 6K brakes #23-105-09 (left) and #23-106-09 (right). These items are not kitted together but you can see each item we have, from magnets to brake shoes to…

view full answer...

Answer 11

Most likely the #23-105-09 and #23-106-09 would work well for you, but you need to verify one more thing. Does the current brake assembly you have attach to the axle with 5 nuts? If so, then you have the standard bolt mounting pattern these two would…

view full answer...

Answer 12

When it comes to brakes for your boss's older Flying L gooseneck horse trailer, I believe that I have exactly what you are looking for, #23-105-09 and #23-106-09 for a 6,000 lb axle. I have included a picture which includes the mounting hole…

view full answer...

Need 12 x 2-Inch Electric Trailer Brakes with 4-Bolt Mounting Flange

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching