Axle Recommendation for a Trailer for Best Ground Clearance
Question:
Can we order this so spring mounting is reversed. I dont care about trailer loader height as much as bottom clearance height, as I am building an OFF-ROAD trailer, and need maximum height between bottom of trailer and ground. Thanks
asked by: Gary
0
Expert Reply:
If ground clearance is your primary concern I have a great solution for you. Instead of a standard axle like the part # T3584F-EZ-8974 that you referenced you would want a Timbren Axle-Less system like the part # ASR35HDS02.
This setup has the same capacity as the axle you referenced, does not have an axle that runs under the trailer, has a 4 inch lift built into it, and has wider clearances for larger off-road tires.
For a hub for this setup you would want the part # 42655UC1.
expert reply by: Jameson C
0
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- How to Determine Correct Length for Replacement 3,500 lb Axle
- Will The Dexter D35 Axle With 89" Hub Face Work As a Replacement For a 88" Hub Face?
- What is Purpose of Bow in Trailer Axle
- Replacement 3,500 lb Trailer Axle that is 89 inches Long for Horse Trailer
- Are EZ-Lube Axles Only for Marine Boat Trailer Use
- How to Fix 76 inch Axle Spring Seats for Trailer with 74 inch Spring Seat Measurement
- Replacement 3,500 lb Trailer Axle with 74 inches Between Spring Seats and 88 Hub Face to Face
- Will Light Load on Trailer Cause Uneven Tire Wear
- Locating Replacement Axle for 2004 Marine Tracker Boat Trailer
- Replacement Options for Dexter Axle P-15 3,500 Lb
- How to Find Proper Length Replacement Trailer Axle
- Replacement for Al-Ko 405076.9 Trailer Axle
- Finding a Replacement 3,500 Lb Axle
- Dexter Trailer Axle Measurements on 89 Inch Axle
- Availability Of Dexter 3500lb Axle With 70.5" Spring Center Measurement
- How To Measure To Replace Bent Trailer Axle
- How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
- Axle Recommendation with 74 inch Spring Center Dimensions
- Choosing the Correct Replacement for a Bent Axle
- Replacement Axles for 2004 Big Tex Trailer
- How Can You Determine Axle Load Capacity on a Dexter Axle
- How Does EZ-Lube Spindle Grease Hub Components
- How to Determine if 3,500 Hubs will Fit Axle Hub T3584F-EZ-8974
- Is 23 inches from Spring Seat to Hub Face Too Long
- Where Do I Position My New Trailer Axle?