Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If your 2016 Mercedes-Benz Sprinter 2500 came with a factory 7-way trailer connector then there should be a green connector located under the driver's seat. This green connector would then be plugged into a Mercedes-Benz speciality harness and…
view full answer...If your leaf springs are slipper springs, such as #WIH4, then you will not be able to use a Dexter over/under conversion kit, #K71-384-00. What you would have to do is cut off the hangers the leaf springs hang from and have new, taller ones welded on…
view full answer...The closest size tire that we have to the Tow-Master F65-14ST that you referenced is a size 205/75R14. Since these tires are not exactly the same size you will either need to find a direct Tow-Master F65-14ST for a spare or I recommend that you…
view full answer...The closest grease seal we have available to the dimensions you provided is the Redline #10-40. This seal features the same 1.938 inner diameter but a slightly smaller 2.510 outer diameter. This may work as a replacement on your hubs but we do not…
view full answer...Since you're replacing your rooftop unit on your Dometic AC system with the Furrion Chill Replacement RV Air Conditioner for Dometic Brisk Setup #FR42PV your current thermostat will work the same as before. This unit simply plugs into your…
view full answer...The Triangular Equalizer #TREQ310 is a replacement for the Dexter 13-10 on your 2022 Nash 23D travel trailer. You should consider upgrading to the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR. These will pair with either the 2-1/4"…
view full answer...Adjusting self-adjusting brakes is going to be a lot more difficult than manual adjusting ones due to the starwheel and how the self adjusting cable is attached. The procedure listed in Connor's answer is what has been relayed to us by Lippert as…
view full answer...Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...I would be happy to help you! The EZ loader oil bath hub assembly 300-029534 is a complete 5-on-4-1/2 idler hub kit that includes races, bearings, seal, washers, nut, retainer nut and cotter pin, bearing protector and lug nuts. Some of these hubs fit…
view full answer...Grease seal set #RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.
view full answer...The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…
view full answer...I do have an option for you but we do not carry the exact replacement you are looking for. For your trailer, I recommend using the Dexter Equalizers part #13-140-3. These equalizers are almost an exact replacement for the ones you currently have. All…
view full answer...Filter Your Search