Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle

Question

Question:

Can you tell me if this part is the same as Dexter part number 072-079-00? Thanks!

asked by: Kurt B

1

Helpful Expert Reply:

Yes, our Dexter leaf spring part # DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

expert reply by: Jameson C

1

Answer 1

Hey Jeremy! Happy to help get you set up with all the parts you need. Before I can narrow everything down, I’ll need a bit more information to make sure we get the exact fit. I was able to confirm that your axle number 57920 uses seals designed for…

view full answer...

Answer 2

Hey Martin, Yes, I can verify that the 1-3/4 inches that you're seeing from Measurement D is accurate for the 24-7/8" Long 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles #DX74XR. Just an FYI there is another version of this leaf spring…

view full answer...

Answer 3

Hello Steve, thanks for reaching out. In my honest opinion, leaf springs are leaf springs. There is not going to be a noticeable difference in quality or longevity between the different brands. As long as the length of the spring is correct and the…

view full answer...

Answer 4

Hey Richard! How did you measure your current leaf springs to get the 25-1/2" eye to eye measurement? We recommend jacking one side of the trailer up to get the weight off of them before measuring because they stretch out quite a bit over years…

view full answer...

Answer 5

Hello Pat, The 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" #e89FV are our own product, so we're the manufacturer and they are made in China. The Dexter 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long…

view full answer...

Answer 6

If your 2021 Grand Design Solitude 375RES is loaded when you're taking that measurement then yes, that would be why you're seeing a difference in the length from what you're measuring and what we have listed for the 7-Leaf Double-Eye…

view full answer...

Answer 7

Hello Jay, So, the good news is that yes, the CRE4000 #MR29DR can work with your 2023 Grand Design Imagine 2500RL. It’s built for tandem axle setups with axle ratings from 3,500 to 7,000 lbs, just like the CRE3000. As long as your axle spacing is the…

view full answer...

Answer 8

Hey Jed, I spoke with Curt and they stated that they do not have a custom-fit wedge kit for the Curt PowerRide #C69VJ and that they don't recommend using it with a rotating pin box. Do you have a short bed and need to use the rotating function…

view full answer...

Answer 9

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

view full answer...

Answer 10

I can help you determine the right replacement double-eye leaf springs for your Keystone Hideout, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf…

view full answer...

Answer 11

I can certainly point you in the right direction on a few of the parts you will need. Unfortunately we do not carry a 20-3/4" long equalizer, so we do not have any kits that would accommodate that hanger size and axle spacing. We do have a few…

view full answer...

Answer 12

The EZ FLex kits like the #K71-657-00 are designed to work with standard trailer hanger kits. If you need hangers you could use the part #28-5 for all of the hangers that your trailer needs and you'd be set as the EZ Flex kit comes with…

view full answer...

Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle

Product Page this Question was Asked From

Continue Researching