Replacement Trailer Hub Grease Seal for TCM 17255TB Seal
Updated 05/27/2015 | Published 05/26/2015 >
Question:
The bearing seal has a TCM 17255TB embossed on the edge of the rubber outer ring. Inside it has a spring around it. How is this different from a 171255? Measurements for OD and ID of the 17255TB are the same as the 171255. What is the thickness of the 171255? The 17255TB is 0.500.
asked by: Dan
0
Expert Reply:
Grease seal set # RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: shoreline boat trailers
- Search Results: trailer tires and wheels
- Search Results: replacement spindle washer
- Search Results: seal cross reference
- Video: Curt Wiring Harness Comprehensive Review and Installation
- Shop: Bearing Kit with Grease Cap for BT8 Spindle, Bearings L44643, Races L44610, 34823 Seal
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-K
- Search Results: axle seal
- Search Results: trailer lights
- Search Results: aluminum trailer rims
- Video: Complete Breakdown of the 3-Wire Pigtail for Optronics Trailer Lights
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - Weathertight Plug - 10" Lead
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Threaded - Galvanized
- Shop: Trailer Hitch
- Shop: Aluminum AM03 Series Matte Black Machined Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2
- Shop: Suspension Enhancement
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Video: What to Know About the Curt Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Deka Jacketed 4-Wire Spec Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: All About the Demco Hydraulic Brake Actuator w/ Drop
- Shop: Trailer Wiring
- Q&A: How To Calculate the Weight Capacity Needed For Trailer Leaf Springs
- Shop: Vehicle Tow Bar Wiring


