Replacement Idler Hubs for a EZ loader Oil Bath Hub Assembly
Updated 07/06/2022 | Published 07/04/2022
Products Featured in This Question
Question:
Is there anything comparable to EZ loader oil bath hub assembly 300-029534. Also I would need something comparable to EZ loader torsion axle 300-031349-10. Any info would help thank you
asked by: Mark N
Expert Reply:
I would be happy to help you! The EZ loader oil bath hub assembly 300-029534 is a complete 5-on-4-1/2 idler hub kit that includes races, bearings, seal, washers, nut, retainer nut and cotter pin, bearing protector and lug nuts. Some of these hubs fit on a straight spindle, meaning as spindle that uses the same part for both its inner and outer bearing. The actual bearing numbers are not provided on their site. Our best option would be the Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast item # T4084600042.
The Titan 10" Hub and Rotor item # K08-435-05 that you were looking at can be also used with EZ lube spindles. It uses Inner bearing item # L68149 and Outer bearing item # L44649. The best way to determine which one you will need is to remove your hubs and measure the spindle and/or look at the numbers stamped into the side of the bearings. I have linked a diagram below that will show you how to measure your spindle.
You will also need the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 item # RG04-040 which has the removable center sections to make it compatible with your EZ lube spindle.
As far as your torsion axle goes we do not have anything comparable. The best option we have is to replace it with the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs item # TASR5200S03.
(click to enlarge)
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: ufp
- Search Results: brake actuator
- Search Results: wire
- Q&A: Replacement Tire For A Carlisle Sport Trail LH 5.30-12 On A Jet Ski Trailer
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5.2K to 6K - Oil
- Shop: Manual Lock Out Kit for Demco DA75 Trailer Brake Actuators
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Dexter DB-35 Single-Wheel Disc Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K - 1-3/8" Spindle
- Q&A: What Is The Highest Load Rating Available For 185/80-13 Tires?
- Shop: Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Search Results: st145/r12
- Video: Trailer Wheel Bolts Feature Review
- Shop: Karrier ST185/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Search Results: lug nuts
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Search Results: 1/2 x 20 lug nuts
- Search Results: 1/2~20 lug nuts
- Q&A: Do You Have a Tire Comparable to the Kenda 5.30-12 Bias with a Load Range E?
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE46EV
- Q&A: Cross Reference a Replacement for a TCM 21334 TB Grease Seal
- Video: Let’s Check Out the Timken Grease and Oil Seal
- Shop: Vehicle Lights
- Shop: Trim Kits
- Video: Comprehensive Review: Hood Latch with Mounting Bracket
- Video: Hands-On with the Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware
- Q&A: Recommended Dust Cap for Dexter 10" Hub-and-Rotor Assembly
- Q&A: Replacement Disc Brake Hub and Rotor Assembly For a 2014 Marine Master Boat Trailer
- Video: Review of Dexter Trailer Axles - Trailer Spindles - Trailer Suspension Parts - DX82CR
- Q&A: 5,200 Lb Timbren Axle-Less System With Compatible Hub, Drum and Electric Brakes
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles