Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels - Qty 1
(123 reviews)
Price: $16.26
In Stock
Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels - Qty 1
Item # F008550
Retail:$39.99
Our Price: $16.26
You Save: 59%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (123)
- Q & A (17)
- Photos
- Why etrailer?
Fulton Trailer Fenders - F008550
- 8 Inch Wheels
- 10 Inch Wheels
- 12 Inch Wheels
- Plastic
- 20 Inch Long
- For Single-Axle Trailers
- Bracket Mount
- Black
- Fulton
- No Step
7" Wide x 20-1/4" long x 6-1/4" tall. Made of high-density polyethylene, this fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color means scratches are virtually invisible.
Features:
- Mounting slots for easy installation
- High-density polyethylene material - corrosion proof and impact resistant
- "Scratchproof", molded-in color - black
- Built-in fender skirt
- Mounting brackets and hardware sold separately
Specs:
- Application: single-axle trailers with 8" - 12" diameter wheels
- Dimensions: 7" wide x 20-1/4" long x 6-1/4" tall
- 5-Year limited warranty
Dimensional Information
| A | C | D | E | M3 | M4 | Wheel Size | Part No. - White | Part No. - Black | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style A | |||||||||||||
| 7" | 20.25" | 6.25" | 4.62" | 2.25" | 2.5" | 8" - 12" | F008540 | F008550 | |||||
008550 Fulton Plastic Fender, Style A, Black, 8" to 12" Tires
California residents: click here
Customer Reviews
Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels - Qty 1 - F008550
Average Customer Rating: 4.9 out of 5 stars (123 Customer Reviews)
7" Wide x 20-1/4" long x 6-1/4" tall. Made of high-density polyethylene, this fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color means scratches are virtually invisible.
- F008550
by: Frank B.04/25/2020
Great fenders for my small utility trailer. Easy to put on. I recommend buying the brackets, carriage bolts and nuts for installing the fenders from etrailer. They are expensive but they are just what you need. The brackets and bolts cost more than the fender, but that is the way it goes. I put a lock washer on the bolts to keep them tight. The installation was easy. You may have to drill some holes in your trailer and buy an assortment of nuts and bolts to mount the fender brackets to your traiker. I am happy they invented these plastic fenders. They are light weight and will not rust.
- F008550
Greg R - 01/15/2015
by: Greg Redden01/13/2014
I built a Tear Drop Camper and the style of these fenders works well withe design - very happy with the easy installation and appearance.
Comments
We have put a few thousand kms on our tear camper over the last year-and-a-half since it was built and the replacement trailer fenders do a great job of protection the woodwork from rock chips...and they still look great!
Greg R - 01/15/2015
- F008550
by: Carlos11/27/2018
I installed these fenders on a harbor freight trailer with 12" wheels. The fenders fit perfectly and work even better than the original ones as the inner skirt keeps debris out of the trailer. The fenders look very well built and I'm sure they'll outlast the trailer.
- F008550
by: Eldon04/01/2020
I purchased these plastic fenders and mounting brackets to upgrade my Jon boat trailer. They arrived on the date promised - very customer friendly ordering system! I needed to make a minor modification on two brackets for my trailer. I'm very happy with these fenders and mounting brackets - both resulted in exceeding my expectations for looks and design! Keep up the great work e-trailer!
- F008550
Vincent S - 10/19/2015
by: Vincent Santamaria10/09/2014
Needed a fender with a skirt to keep the monkey's (sidecar rider) hands out of the sidecar wheel. So I thought of e.trailer who has always done me right. Had to do some trimming of the fender to get it to fit but it worked out just great. Thanks etrailer for the quick shipping and excellent service.
Comments
I always have good results with the products I order from etrailer!I used the fender to replace the one on my very small sidecar rig. Probably not an usual application but it is working well and I dont have to worry about grand kids getting their hands in the wheel because of the skirt on the fender.
Vincent S - 10/19/2015
- F008550
by: Mark06/21/2016
Fenders arrived when promised. 20 minute installation, a great fit for my 2010 smart trailer. Fenders are a direct replacement. The whole experience was quick and easy. Thanks
- F008550
by: Timothy08/21/2021
They seem to be solid fenders with multiple mounting options
- F008550
by: Jim K.08/21/2013
I purchased these plastic fenders to replace the existing fenders on my LOWE trailer. The black fenders were chosen because they would show less dirt and stains. All bolts lined up perfectly and the fenders fit exactly the same as original equipment. I thin k the fenders look better than the gray fenders originally on the trailer.
- F008550
by: Scott07/24/2021
Super fast shipping. They fit like a glove. Let's see what the sun does to them over a couple years.
- F008550
by: Keith03/31/2021
Perfect Fit. Came when expected. Quality product. Replaced broken fenders on boat trailer.
- F008550
by: Paul08/30/2021
Good product, great price!
- F008550
by: Robert06/16/2021
Perfect replacement!
- F008550
by: Mike06/12/2021
Quick delivery, top quality. Just what I needed! Mike Ross
- F008550
by: Bruce P04/04/2012
Very nice quality product, easy to adapt to most installations. Shipping was very fast - Thanks.
- F008550
by: Savelie08/17/2021
Perfect fit
- F008550
by: b.cramer10/09/2016
was able to use the fenders, with modified mounts, on a Haulmaster trailer. If you have a Haulmaster trailer, sell the stock fenders for scrap and go to E trailer for a set of light plastic fenders , make your own mounts( aluminum stock will work) you will be better for the effort.
- F008550
by: Danny02/18/2019
These fenders worked better and are stronger than I expected! Adapted the angle braces and everything fit like a glove! I definitely would recommend them.
- F008550
Linn - 06/04/2015
by: Linn06/04/2014
The fenders seem just right for my trailer> I was surprised at how light they are, but also strong.
Comments
The fenders are doing great and still look new after sitting in the sun for a year.
Linn - 06/04/2015
- F008550
by: Michael06/06/2021
The fenders fit perfectly and are good quality.
- F008550
by: Mary C.05/10/2012
They look great! No need for paint and mounting was so simple I did it myself. Thank you and I will look to see what else I might need. Sorry I only have one pic at this time.
- F008550
by: Jerry01/17/2018
George...... The fenders turn out fantastic; I had factory fenders on the original installation, but they would vibrate, fatigue at there mounting bolt points and fall off. I lost one original fender between Tucson and Yellowstone. The other between Tucson and Chicago. I ordered and installed the Fulton fenders in northern Indiana, and drove to West Palm Beach, and returned to Tucson.
- F008550
by: elroy09/11/2020
great little fenders, perfect replacement for the factory ones that cracked after the sun dried them out.
- F008550
by: Jonah V.03/09/2017
Great fender, fit is good, price is competitive and shipping was quick and secured.
- F008550
by: Doug05/07/2019
I used this fender to upgrade the folding trailer I purchased from Harbor Freight. This fender works great and looks good too! I recommend this for anyone with even just basic handyman skills.
- F008550
by: Jason B.08/04/2014
Very well made. Design Quality and Fitment were perfect.
36
137
Show More Reviews
Ask the Experts about this Fulton Trailer Fenders
- How to Mount the Fulton Trailer Fender # F008550The Fulton Plastic Fender - Black - 8 to 12 inch Tires, item # F008550, is designed to be mounted to existing hardware or mounted with brackets designed to attach to the specific trailer frame they are being installed on. No mounting hardware is included. We do have some mounting hardware available (see link) that may work on your trailer. You will need to determine the mounting location and style of bracket that will work on your trailer.
view full answer... - Grease Seal Availability with Inner Diameter 1.5 and Outer 1.987Try measuring your old grease seal again as most likely the part # 10-9 would be the correct seal you would need. This seal has an inner diameter of 1.50 inches and an outer diameter of 1.987 which is pretty close to what you have but not quite the same. This would be the best option we could provide. The closest grease seal to match the second set of dimensions is the part # BB60002 that has inner diameter of 1.875 and outer diameter 2.560.
view full answer... - Wheel Bearing Replacement For Snow Bear TrailerI spoke with Snow Bear and they said they no longer support the utility trailers, so information about your trailer is not available. The best way to find the correct bearings is to get the numbers off of the old bearings. Another method is to take measurements of the spindles, using a precision digital caliper. I have attached a drawing that shows where the measurements need to be taken. If you can get the original part numbers, it would be much more reliable. The drawing shows where...
view full answer...![Image 1 for]()
- Will Fulton Trailer Fender # F008550 Fit a 2006 Snowbear 8000 TrailerI did a little research and found that the model 8000 Snowbear trailer had a fender that is a little different than the Fulton Plastic Fender, # F008550. The Fulton fender has a fender skirt while the Snowbear OEM one does not. If you are looking to have this style of fender with a fender skirt, then you will need to make sure there is enough clearance inside the fender for the tire so that it does not rub the fender skirt. If your tires are more than 7 inches wide, the fender will not...
view full answer... - Determining Which Replacement Wheel Bearings Needed for SnowBear 8000 Utility TrailerTo find the correct replacement bearings, you will need to pull one of the hubs off and remove the inner and outer bearing to obtain the reference numbers from them. The reference number will be stamped into the steel cage holding the bearings, as seen in the provided photo. Your grease seal will also have a reference number, as shown. If the numbers are unreadable, you can use an accurate measuring tool like a # PTW80157 digital caliper and measure the surfaces of the spindle where...
view full answer...![Image 1 for]()
- Mounting Bracket Recommendation for Fulton Trailer Fender part # F008550The recommended mounting brackets you need for use with the Fulton Single Axle Trailer Fender # F008550 that you referenced is the # CE26065PGA.
view full answer... - Grease Seal Recommendation to Replace one with ID of 1.2355 and OD of 1.975The closes grease seal we have to the dimensions you listed is the part # 34823. This seal has an outer diameter of 1.983 inches and an inner diameter of 1.249 inches. You might remeasure your seals to be sure. For the inner diameter it will be easier to get an exact measurement by measuring the spindle where the seal rides instead.
view full answer...![Image 1 for]()
- Is There Typical Way to Remove Hub That is StuckThere really isn't a tried and true method to get your hub off, particularly if yours somehow got hot enough that it basically welded itself to your spindle. The only thing I can really recommend is using a hammer and trying to hammer it out as best you can. Essentially, brute force.
view full answer... - Choosing Replacement Fenders for a Leeland Jet Ski Trailer with 12-Inch WheelsWe offer a range of trailer fenders in aluminum, plastic and steel, both with and without steps, that will fit 12-inch trailer wheels. You can use the link provided to select the material of your preference as well as the length you prefer (20-inches) by clicking on the filters in the left margin. For example, we offer the Fulton no-step black plastic fender # F008550 and the white version # F008540 that are 20-inches long and fit 12-inch wheels.
view full answer... - Recommended 10 Inch Plastic Fender for Boat TrailerIt sounds like you are looking for a 10 inch wide fender. We have metal fenders that are 10 inches wide, but not plastic fenders. If you absolutely need plastic take a look at part # CE19502-2. This fender is for 12 inch wheels, but I think it would be close enough to your size. For a demonstration video click the included link.
view full answer... - Recommended Black Plastic Fender And Mounting Bracket For Small Trailer That Has 8 WheelsYour best bet is to use Fulton Plastic Fender, Style A, Black, 8" to 12" Tires # F008550 with mounting bracket Mounting Brackets for Trailer Fender # CE26065PGA. This setup is designed for trailer tire sizes 8" to 12". Your tires appear to be about 8-1/2" wide but this fender is only 7" wide. This will not be an issue as it is meant to be mounted above the tire and not touching the tire. If you wanted a fender with a step, use Single Axle Trailer Fender w Top Step - Style C - Black Plastic...
view full answer... - Mounting brackets for Mounting the Fulton Trailer Fenders # F008550 to a Motorcycle TrailerWe carry fender mounting brackets that may work for your application. Check out the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W (Pair), item # PF775-BKT-2. These brackets are designed for the Plastic, Single-Axle Trailer Fender - White - 8 inch to 12 inch Tires, item # PF775X21W. This style of fender is only available in white. At this time we do not have specific mounting brackets designed to work with the Fulton Plastic Fender - Black...
view full answer... - Dimensions of Trailer Fender Mounting Area for part # F008550The flat area on the inside of the Fulton Plastic Fender, part # F008550, is 2-1/2 inches tall at its highest point and curves downward to meet the side of the fender on each end. The distance across the flat area at its lowest point is 12 inches. There are also two mounting holes on each end of the fender.
view full answer... - Can the Fulton Trailer Fender # F008550 be mounted to the Sidewall of a Tear Camper TrailerYou should be able to mount the Fulton Trailer Fender, # F008550, to the side of your camper trailer. Depending on the trailers construction you may need to use a mounting bracket and some carriage bolts to utilize the square attachment holes in the front and rear of the fender, or you may be able to bolt the fender directly to the side of the trailer through the fender skirt on the back side of the fender.
view full answer... - Replacement Black Fender for 2015 Tracker Trailstar TrailerWe offer a number of black plastic replacement trailer fenders from CE Smith and Fulton that work as general-purpose replacements. All appear on the page I linked for you. I reviewed many photos of single-axle Tracker trailers and most seem to show a fender design like # F008551, # F008550 and # F008554. Be sure to confirm your wheel size to make sure you select a compatible size fender. Part # F008554, for instance, is intended for 14-inch trailer wheels while part # F008550 work with...
view full answer... - What is the Radius of CE Smith Single Axle Trailer Fender CE17701GIf by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender # CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does not represent the actual dimension of the radius. Because two of these fenders placed together would not make a complete a circle, the actual radius would be unobtainable and would most likely be slightly less than 11-3/4 inches. Fulton...
view full answer...![Image 1 for]()
- Can I Upgrade From 8 Inch to 15 Inch Wheels On a Boat TrailerIt is possible to switch from 8" wheels to 15" wheels yes but, in addition to fender clearance issues you will also run into not having enough surface area on the hub for the larger wheel size. For example, the Trailer Idler Hub Assembly part # AKIHUB-545-2-1K which is common on 2,000 lb axles and what I suspect you have only has enough surface area to work with 12" wheels max. Therefore, in order to upgrade to 15" wheels you will also likely need to upgrade hubs as well as fenders. In...
view full answer...
Do you have a question about this Trailer Fender?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer fenders for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer fender information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.