Need To Replace Fender On 2007 5x10 Snowbear Utility Trailer

Updated 08/20/2024 | Published 08/15/2024

Products Featured in This Question

Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1

(745)

$52.78

CE Smith Single Axle Trailer Fender - 16 Gauge Steel - 13" Wheels - Qty 1

(613)

$34.15

Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2

(211)

$27.26

Question:

Hello. I need to replace a fender on a 2007 5x10 snowbear utility trailer. The existing g fender bolts directly to the frame/leaf spring. Holes are 24” o.c. 13” tires. Can you recommend a replacement solution? Looking for bolt on solution. Any suggestions would be appreciated. I can send pics if that helps. Thanks!

asked by: Mark P

Expert Reply:

Hello Mark, thanks for reaching out. I looked over a few pictures of these 2007 5x10 snowbear utility trailers, and we may have a fender that will work as a replacement, but we do not have anything that will directly replace it as far as bolting right on.

Any chance you can measure the overall length of the fender? That will be the best measurement to have for narrowing down a replacement. For example, we have the CE Smith Single Axle Trailer Fender # CE17721 which is for 13" tires and measures 25-3/4" long and 7" wide. It is raw steel so it will need to be painted. Most of the ones I saw online were black. If you can tell me the length and width of your fender, I am happy to look into it and see if we have anything to match. This kind of fender can be bolted on using L-brackets like part # CE26098G-2.

expert reply by: Jesse M