Product Experts Available Now!
Call 1-800-940-8924
Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
(93 reviews)
Price: $27.55
In Stock
CE Smith
Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
Part Number: CE26065PGA
In Stock
$27.55
Retail:$39.95
You Save: 31%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (93)
- Q & A (0)
- Photos
CE Smith Accessories and Parts - CE26065PGA
- Trailer Fenders
- Mounting Hardware
- Brackets
- CE Smith
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 2-1/4 Inch Tall
- 6 Inch Wide
These brackets let you mount a 7" wide polypropylene fender to your single-axle trailer. Pre-galvanized steel construction can be primed and painted. Requires 3/8" bolts (sold separately). One fender requires 2 mounting brackets.
Features:
- Brackets let you mount 1 fender on your single-axle trailer
- Designed for use with 7" wide, round plastic or polypropylene fenders
- Fits 8", 10", and 12" tires
- Pre-galvanized steel construction
- Can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish
- Bolt-on installation - attach to your trailer frame and to the underside of your fender
- Requires (6) 3/8" bolts (sold separately)
- Made in the USA
Specs:
- Overall dimensions: 6" long x 2-1/2" tall x 1/8" thick
- Mounting hole diameter: 3/8"
- Fender mounting hole spacing: 2-1/2" apart on center
- Quantity: 2 brackets
These brackets make it easy to mount a fender to your trailer. Simply bolt each bracket to the underside of the fender using the 2 holes on the long end of the bracket. Then bolt each bracket to your trailer using the single holes on the short end.
26065PGA C.E. Smith Fender Mounting Brackets for Round Plastic Fenders
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
93 reviews
by:
Frankb
05/08/2020
These are the perfect brackets to hold the plastic fenders on the trailer. I recommend buying the carriage bolts and nuts from etrailer too. I did put a small lockwasher between the nut and the fender. This made the carriage bolts tighten up for a perfect fender mounting job. The mounted fenders do not rattle or shake. Highly recommended. You don't want your fender in the middle of the road after it falls off. Put it on right.
by:
Eldon
04/01/2020
I purchased these plastic fenders and mounting brackets to upgrade my Jon boat trailer. They arrived on the date promised - very customer friendly ordering system! I needed to make a minor modification on two brackets for my trailer. I'm very happy with these fenders and mounting brackets - both resulted in exceeding my expectations for looks and design! Keep up the great work e-trailer!
by:
John K.
02/18/2017
Worked great for hanging new Fulton step fenders on my kayak trailer. I did have to shave down the inside edge of each fender about an 1/8 of an inch for clearance, but otherwise perfect and the new fenders are mounted much more securely than the originals that came with the trailer. The original fenders mounted with two bolts through the inside skirt of the fender allowing them to flex on rough sections of road causing stress cracks in the skirt within the first year of use. I don't see that being a problem with these mounts and the fenders no longer flex at all.
by:
MW
08/30/2018
I painted these brackets silver to match the fenders and they work perfectly. The fender does not touch the body of the trailer. It's a little more than a half inch away from the side wall of the trailer.
I will definitely order these brackets again.
I will definitely order these brackets again.
by:
Michael
01/29/2021
These brackets work great with the plastic fenders I purchased.
by:
Bill S
02/23/2017
Exactly as advertised - quality products. Instructions + Service + Delivery all far above the average mail/on-line order company. I will definitely be recommending etrailer to others over time. Thank You!
by:
Samuel
10/27/2019
I wish I had taken before and after photos of my trailer. A typical 5x8 utility trailer with the extruded wire mesh deck which I got for a bargain, perfect for my lawn tractor or 4 wheeler. However the 8" wheels did not provide enough ground clearance for the terrain where I intended to use it as a equipment hull trailer to our deer camp, pulled by the 4 wheeler. After finding etrailer.com my problems were solved! I ordered 5 bolt hubs, 5.30 x12" wheels and the economy plastic fenders and fender brackets. While waiting my order I wire wheeled the frame and gave it a fresh coat of paint and WHAL-LA! I have a new looking trailer! The order arrived in record time, securely packaged and great quality! I ordered the pre-packed hubs and didn't have to get into that sticky mess! Everything worked out as planned and was easy-peezy to assemble and install. I'll definitely use etrailer.com in the future.
by:
Mark
07/30/2024
I recently ordered these fenders and brackets to restore a boat trailer for my Grandson. I also ordered the 4 ft rollers and the brackets that attach the rollers to the trailer. Everything that was shipped was on time and fit exactly the way your video’s explained. The customer service people are fantastic.
by:
Rd
06/11/2020
My original fender brackets on my trailer both broke due to metal fatigue. I ended up losing both fenders. I purchased these over a year ago and they are tough enough to secure the fenders with no issues.
by:
Rick P.
06/29/2015
Good heavy brackets, .125" thickness (11 ga). If used with the F008550 plastic fender they give a standoff of 7/16" between the fender and the body.
Rick P.
6/28/2016
Great.
by:
Michael
01/31/2018
Fender brackets showed up on time, installed right away with no issues.
Michael
1/31/2019
Still attached, still keeping crap from flying up
by:
Carl
04/20/2023
The folks at etrailer are always very helpful and knowledgeable. I’ve ordered quite a few items here and it has always been a pleasure to do business with them. Also good prices and fast shipping.
by:
John
02/23/2025
Exactly what I order, well made fenders and braces!
by:
Don
07/17/2015
Customer service review: Outstanding! Received a phone call within 12 hours notifying me that items in this order were out of stock. They managed to fill the order and deliver it within my original time frame. The trailer gets its shake down cruise shortly and I'll review the components from this order afterwards.
by:
Tim
06/26/2019
good product. excellent costumer support. contacted me when part was on back order and provided alternate replacement. fast shipping.
by:
William
07/24/2020
I couldn't believe how well made the brackets are, they fit the fenders exactly. Now I don't have to be concerned that a bracket is going to break or rust off!
by:
Robert
09/09/2019
Excellent brackets, used existing holes on trailer and bolts, very happy
by:
Armando
01/09/2020
I am very pleased with the prompt delivery of the fender and brackets. It was exactly what i needed to repair my trailer.
by:
Pascal
12/16/2017
The easiest and sturdiest way to affix a fender, best products at the best price, always, thanks etrailer!
by:
Lonnie
08/09/2022
The holes for mounting to the fender should be square to allow full flush mounting of a normal 3/8 carriage bolt
by:
Scott
07/24/2021
Super fast shipping and they appear to be heavy duty. How long they last will be the true test
by:
Trent
07/21/2018
These brackets fit up with my f008551 fenders nicely... heavy duty great price thank you..Trent
by:
Dominic
02/03/2024
on a non suspension dolly it breaks in fatigue (vibration in 2-3000 kiles
by:
John
05/09/2018
Good product fit nicely to the fenders I got from etrailer
by:
Robert
06/29/2021
Super fast shipping and products were exactly as described.
25
93
true
Show More Reviews
See what our Experts say about this CE Smith Accessories and Parts
- Replacement Fenders for 1998 Triton Boat TrailerHey Eric, thanks for reaching out! From what I could find online, it looks like the Single Axle Trailer Fender for Boat Trailers # HP58VR and Mounting Brackets # CE26065PGA would be an excellent fit for you! If you'd rather have a different design, just let me know and I'll be more than happy to help you find the style you want.
view full answer... - Will CE Smith Mounting Hardware Fit with etrailer Square Style Jeep FenderHey Curtis, thanks for reaching out! Yes, the Single Axle Jeep Style Trailer Fender # HP49VR can be installed using the Mounting Brackets for Trailer Fender # CE26065PGA. They weren't necessarily designed for each other, but they will work together. Are you building an off-road trailer, or just trying to spruce up an older model trailer?
view full answer... - Metal Fenders to Fit with Kenda 4.80/4.00-8 TiresHey Bryan, The metal fender I recommend picking up to match with your Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30000 is the etrailer # HP89VR. This comes as a single unit, so you'll need to order accordingly, and it doesn't have a skirt or backing plate, but we do have a mounting bracket kit # CE26065PGA that can be used for the installation.
view full answer... - Replacement Fenders And Brackets For An Older Karavan TrailerI can definitely help point you in the right direction, but we do not offer a universal fender for a Karavan trailer. Fitment mostly depends on the wheel size. Looking at these different Karavan trailers, it appears some models use a plastic fender with a step, and other use just a basic fender with no step. For example, if you have 12" wheels, a very common fender is the Fulton # F008572. This fender has steps and measures 33-1/2" long, 7-1/2" wide and 8-3/4" tall. This fender will go...
view full answer... - How to Install Plastic Fulton Fender on TrailerYes you need to use brackets like part # CE26065PGA or # CE26061G to install the Fulton Single Axle Trailer Fender with Top Step # F008542. Basically you just secure one side of the bracket to your trailer and then the other side of the bracket to the fender. Since there are a wide variety of ways that this can be done there isn't really a specific way to do this or specific hardware that "has" to be used aside from the diameter being 3/8" to fit the brackets.
view full answer... - Replacement 20 Inch Fenders with Skirt for Karavan Trailer FenderBased on my research, the CE Smith Single Axle Trailer Fenders with Skirts # CE19500-2 that you referenced are very similar to the fenders you mentioned. The CE Smith fenders are designed to work with wheels 8 inches to 12 inches in diameter. Both fenders are bracket mount, so the # CE19500-2 will work well as a replacement for you. Karavan lists the spacing of the bolt holes on their fenders at 2.41 inches, while the bolt holes on the CE Smith fenders measure 2-1/2 inches apart, center...
view full answer... - Fender and Mounting Brackets for a Harbor Fright Haulmaster Trailer I have a great fender for your Harbor Fright Haulmaster trailer it is the Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels item # F008550. This fender will fit wheels up to 12" and is 7" Wide x 20-1/4" long x 6-1/4" tall. This fender comes individually. You will also want the Mounting Brackets for Trailer Fender - 8" to 12" Wheels item # CE26065PGA.
view full answer... - Picking Out Fenders for Trailer that Stick Out 7 inches from FrameFor the width you have between your trailer frame and the outer edge of your tire the fender part # CE19500-2 you mentioned would work great. Then for fender brackets the part # CE26065PGA would be all you'd need and you'd be set.
view full answer...
- Trailer Fender Installation Brackets for CE Smith Trailer Fenders The installation brackets that are recommended for the # CS19501 trailer fender are the # CE26065PGA. I have included a link for your reference. We also have several customer installation photos that show how the brackets attach to the fender and the trailer. If those don't look like the brackets that you would need, I have also included a link to the other CE Smith trailer fender mounting brackets that we currently offer.
view full answer... - Can I Drill And Mount The CE Smith Fenders To My Existing Fender Tabs? Yes, you can drill a different set of mounting holes in the CE Smith Single Axle Trailer Fenders # CE19500-2 to mount it to your existing welded tabs. I have attached a picture of them mounted using a different set of mounting holes that a customer shared. They are ridged enough to continue to hold their shape. You can still use the Mounting Brackets # CE26065PGA or # CE26061G-2 to mount the fenders as well on your frame. These would allow you to fill the holes and provide additional...
view full answer...
- Will the Mounting Brackets # CE26065PGA Work for Fulton Single Axel Side Steps # F008582?I have a great solution for you. Unfortunately, the Mounting Brackets for Trailer Fender - 8" to 12" Wheels # CE26065PGA will not fit for mounting your Fulton Single Axle Trailer Fender with Top and Side Steps 008582. However, the parts that you need are Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender # PF1135-BKT-2. I went ahead and attached an image of how the brackets will install on the Fulton fenders.
view full answer...
- Can The Fulton Single Axle Trailer Fenders Be Mounted By The Inner Fender? I recommend using the Fulton Single Axle Trailer Fender # F008542 if you are wanting to mount the fender on the inner wheel flange. The Fulton Single Axle Trailer Fender # F008540 uses Mounting Brackets # CE26065PGA to hold the fender in place. It uses these brackets to stabilize the fender as the limited stucture will not provide enough stability for the fender if mounted by the inner fender well.
view full answer... - Can CE Smith Fender Bracket # CE26065PGA Be Used with Fulton Trailer FenderYes, the install brackets part # CE26065PGA can be used with the Fulton fender part # F008559 that you referenced. The great thing about these brackets is how universal they are. And that will easily work with the Fulton fender you have. If you flip the brackets to get more height you'd have to notch the fender most likely so that the bracket clears the fender like it should.
view full answer...
- Can I Upgrade From 8 Inch to 15 Inch Wheels On a Boat TrailerIt is possible to switch from 8" wheels to 15" wheels yes but, in addition to fender clearance issues you will also run into not having enough surface area on the hub for the larger wheel size. For example, the Trailer Idler Hub Assembly part # AKIHUB-545-2-1K which is common on 2,000 lb axles and what I suspect you have only has enough surface area to work with 12" wheels max. Therefore, in order to upgrade to 15" wheels you will also likely need to upgrade hubs as well as fenders. In...
view full answer... - Recommended Metric Bolt for the Trailer Fender Mounting Brackets Part # CE26065PGAThe Mounting Brackets for Trailer Fender part # CE26065PGA is designed to accept a 3/8" (0.375") carriage bolt like part # LC118155 so long as the fender has square holes. If you wanted to use a metric bolt then the correct size would be an M8 as the diameter of an M8 bolt is .3150". There would be no issues using a M8 bolt with this bracket.
view full answer... - Replacement Fender for 2009 Yacht Club Galvanized Trailer Unfortunately your photos did not come through. I can help you with a single tire fender, but we don't carry any tandem axle fenders. It sounds like you are looking for galvanized steel fenders, so here are those options: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel--- 8" Wheels # CE17700G 12" Wheels # CE17701G 13" Wheels # CE17800G 14" and 15" Wheels # CE17900G 15" Wheels # CE17937G Then we have the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized...
view full answer... - Recommended Fender and Mounting Hardware for Homemade TrailerThe Single Axle Trailer Fender w Top Step - Style C - Black Plastic - 8" to 12" Wheels - Qty 1 # F008551 is compatible with many trailer styles. You will just need brackets like the Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2 # CE26065PGA along with the hardware # LC118155 and # LC119072 (6 each for mounting each fender).
view full answer... - Replacement Fender Bracket and Bunk Brackets Needed for Older Boat TrailerWe do have a variety of fender brackets like part # CE26065PGA that fits fenders for 8" - 12" diameter wheels, but these are more or less universal so you'll want to filter through the linked selection to see what will work best for your application. Bunk board (or bolster) brackets are essentially the same thing. You can use a kit like the CE Smith # CE10000G-4 but you'll really want to look through our selection to see what you can get that matches what you currently have best. I've...
view full answer...
- Mounting Hole Spacing for Trailer Fender Mounting Brackets # CE26065PGAThe Mounting Brackets for Trailer Fenders # CE26065PGA are indeed spaced 2-1/2 inches apart on center like you are looking for. You can see this, and other measurements, in the video I have linked below for you.
view full answer... - Recommended Black Plastic Fender And Mounting Bracket For Small Trailer That Has 8 WheelsYour best bet is to use Fulton Plastic Fender, Style A, Black, 8" to 12" Tires # F008550 with mounting bracket Mounting Brackets for Trailer Fender # CE26065PGA. This setup is designed for trailer tire sizes 8" to 12". Your tires appear to be about 8-1/2" wide but this fender is only 7" wide. This will not be an issue as it is meant to be mounted above the tire and not
view full answer... - Recommended Plastic Fender For Motorcycle Trailer With 8-inch WheelsI have attached a link to our product page for the plastic fenders we offer that are designed for 8-inch wheels. Depending on the style fenders you want you can choose from Black, Gray, and White fenders and whether a step is needed for the top of the fender or not. If you want a gray colored fender with no step I recommend part # CE19500-2. These fenders come with pre-drilled mounting holes in the skirts. If you need mounting brackets for the fenders you can check out part # CE26065PGA....
view full answer... - Trailer Fenders For Small Beverage CartThe best way to find the best fenders for your cart is to select the correct fender based on tire size and mounting options. I have attached a link to our product page for the fenders we offer. You can use the filters on the page to select the tire size your cart has and then select fenders that will best work for you. For example, if you have 8 to 12 inch tires you may be interested in the CE Smith Fenders With Skirts, part # CE19500-2. These fenders have a plastic skirt with mounting...
view full answer... - Mounting Bracket Recommendation for Fulton Trailer Fender part # F008550The recommended mounting brackets you need for use with the Fulton Single Axle Trailer Fender # F008550 that you referenced is the # CE26065PGA.
view full answer... - Recommended Fender Brackets for Mounting CE Smith Fenders with SkirtsThe CE Smith Single Axle Trailer Fenders w/ Skirts - Gray Plastic - 8" to 12" Wheels - Qty 2 # CE19500-2 can be installed using the Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2 # CE26065PGA which will then mount to the trailer frame.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Carrie F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill S.
2/23/2018
Excellent product. Ive experienced absolutely no negative issues with this product or the company - etrailers. Great purchase!