How To Choose the Correct Replacement Fenders for a Jet Ski Trailer

Updated 07/15/2020 | Published 07/13/2020

Question:

I have a Waterbug jet ski trailer. It came with a used jet ski we recently purchased. I need to replace the missing fenders on both sides. I tried to attached a photo of existing brackets, but couldn’t get your site to accept. I will be happy to send separately if it will help. The distance from center of hole in rear bracket to center of hole in front bracket is 17 3/4”. The distance between the center of the holes on each bracket is 3 1/2”. The hole size is 7/16” square. Thanks!

asked by: David D

Expert Reply:

In order to choose the correct replacement trailer fenders for a trailer you'll need to know both the style and wheel size. These two things will then get you the best match possible. The Fulton Single Axle Trailer Fender part # F008582 for example is designed for 12" wheels and has the top/side steps.

I have attached a full list of options below but I would not be able to offer any recommendations based solely off the mounting hole measurements.

expert reply by: Conner L