bing tracking image

Review of HE Parmer Trailer Fenders - Steel Trailer Fender - HP89VR

content loading

Customers compare HP89VR to these similar products

Products Featured in this Video

HE Parmer Trailer Fenders - Steel Trailer Fender - HP89VR Review

Hey everyone, I'm Ellen here at and we'll be taking a quick look at the single axle trailer fender. This provides that protection for other vehicles and the gear that you have on your trailer from getting damaged by any kind of debris getting slung up from underneath your tires as they're moving. It also helps to deflect down water, rain, and mud and everything else, and again, keep it from spraying all over the place. So this is made out of a heavy duty, 16 gauge cold rolled steel, so it should last you a long time. So lets get little closer look at it and talk about some of the other finer details and make sure that this is the right fit for your particular trailer.So this works with single axle trailer wheels, or single axle trailers that have up to 12 inch diameter wheels, can work for eight inches up to 12 inches.The edges of our fender, both sides are angled down or curved. They both have a one inch diameter radius, so it gives a nice edge to that.

You can weld this on, it is not pre-drilled, or you can bolt it on. So, if you want to go with the bolt on application you will have to get brackets, they are sold separately to do that.Again, since it is just a plain finish, it does allow you to weld it in place, but you also want to make sure that you prime and paint it to make sure that it doesn't rust out on you, because it will otherwise. As far as the overall size of the fender, from the front edge to the back, it's about 28 inches long and then seven inches wide, and about 10 inches tall. It's a little bit shorter than that; about nine and seven eighths. It is covered by a one-year limited warranty and it is made in the USA, and that really about does it for our look at the single axle trailer fender.

I hope this has been helpful in deciding if this is the right one for you. We do have other options available here at, along with a lot of other gear and parts to get your trailer outfitted, so check them out if you're interested. Thanks for watching.

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.