Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7-3/8" Wide x 21-1/2" long x 6-1/2" tall. High-density polyethylene fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color make scratches virtually invisible. Built-in top step.
Features:
Specs:
Dimensional Information
| A | B | C | D | E | F | M3 | M4 | Wheel Size | Part No. - White | Part No. - Black | Part No. - Silver | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style C | |||||||||||||
| 7.35" | 7.35" | 21-1/2" | 6.5" | 3.75" | 2.18" | 2.43" | 2.5" | 8" - 12" | F008541 | F008551 | F008561 | ||
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at part number F008561. This is the Fulton single axle trailer fender with a nice top step. It's going to be a style C for 8" to 12" wheels. Here on the ends it's going to feature 2 mounting slots. That's going to be identical on the other side. We're going to take measurement of those slots real quick. Center on center, those slots are going to be separated by 2-1/2", and they're going to measure 1/2"x 1/2".
They are a square design, and each slot on each end is going to be identical. It's going to have that convenient top step that's going to offer 300-pound weight capacity. You can see there that it has a nice textured surface to ensure a good grip when you're stepping on there making sure that you don't slip off and fall off of the fender. This is made from a high-density polyethylene material. It's going to be corrosion proof and impact resistant. One of the neat things about this fender is it has a scratch proof design. It's molded in color, and it's going to be in a silver color.
It's also available in black or white. The molded in color really makes it hard to see scratches if it does happen onto the surface of the fender. It's going to feature the built in fender skirt. Again, this is a molded construction. It's a solid piece.
It's going to be made in the USA. It is designed for single axle trailers with 8" to 12" diameter wheels. We're going to go ahead and go over some overall measurements real quick. The overall length measuring from edge to edge, that looks like it's going to give us a measurement of about 21-3/8". The overall height looks to be abou6t 6-1/2". If we take a measurement of the overall width, that's going to give us a measurement of about 7-3/8" wide.
The top step or this pad up here, I'm just measuring the textured surface. That's going to give us a measurement of 4" by about 5" here at the widest point. At the narrowest point, that's going to reduce the width to about 3-1/2" down here. Simple installation. Again, you're going to have the mounting slots that way you can install a mounting bracket, and you can use those holes to line up on the bracket and attach it that way. There's a lot of different varieties when it comes to what's the correct way to mount a fender to your trailer, but on this one, it does have the pre-drilled or pre-cut slots, that way you can attach it to a bracket. Again, you want to make sure you get a nice support system so it can support the 300-pound capacity that it's rated at here when you use the top step. That's going to do it for our review of part number F008561. This is the Fulton single axle trailer fender for 8" to 12" wheels. .
Average Customer Rating: 4.8 out of 5 stars (49 Customer Reviews)
7-3/8" Wide x 21-1/2" long x 6-1/2" tall. High-density polyethylene fender is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color make scratches virtually invisible. Built-in top step.This is the oem fender to fit yacht club Jetski trailer. One hole has to be widened slightly , however this was the case on the original also . Very satisfied with product and even economy shipping is fairly quick (4 days)
Bought these for a miller welder trailer. I think they will fit
Great product at a great price. The previous owner of my PWC trailer painted the fenders with a rattle can and overtightened the bolts so not only did it look bad, the steps were unusable. I watched the videos and followed the measurements and ordered the exact replacements for my 2003 Triton LTWCI. Great job etrailer.com, very pleased and will look to you next time I need parts.
etrailer has the best service and prices around. There had to have been 10 different fender choices but thanks to their thorough descriptions, listings and measurements, it made ordering much easier than other vendors. The fender installed perfectly on my Triton aluminum PWC trailer and got me back in the race. Thanks etrailer!!
Exactly what I needed
Once more I received the highest quality fit perfectly istalled in under 30 minutes and to top it off cheapest price on the internet and fast shipping.. etrailer never disappoints. My next project is using etrailer parts to convert my wired winch to wireless plug and play under $[XX] thanks for etrailers great parts, service and low prices.
Exact replacement for my 2015 Triton Lt jet ski trailer
Fender was an exact match to the original for a Yacht Club trailer.
I HAVE NOT YET MOUNTED THESE FENDERS, BUT THE FINISH IS NICE. THE SQUARE HOLES FOR THE CARRIAGE BOLTS ARE QUITE LARGE, AND I BELIEVE EVEN THE 3/8 INCH DIAMETER CARRIAGE BOLTS I PLAN TO USE MAY BE LOOSE IN THE FENDER MOUNTING HOLES. I ALSO WISH THE INNER "SKIRT" (the side toward the trailer) WAS SOMEWHAT LARGER. I'LL BE BETTER ABLE TO COMMENT ONCE THESE FENDERS ARE MOUNTED.
Geraldine W.
3/12/2017
The fenders have held up very well thank you.
After a year my fenders still look new I'm very happy with them
These fenders are a lot sturdier than what I thought they would be. Color is an very close match to my galvanized trailer. They are really unnoticeable unless your being picky. The pre-punched holes didn’t come anywhere close to matching the hangers that are welded on my trailer frame. It was an easy choice to drill the fenders (plastic much easier to drill than steel). Although I cheated by using a pneumatic impact to remove and reinstall the wheel lugs and fender bolts, it took about 40 minutes to complete the job. I had one fender that had been damaged several years ago and finally rusted through. These fenders are a great investment and have brought the trailer back to near new condition. Ordering was easy and shipping was super fast and only $[XX] to Florida. Great job etrailer
Very nice product and a perfect fit! Also great price! Thank you!
Fast shipping and great customer service
Excellent low-cost alternative for Hobie Cat trailer i just bought with missing fenders. Easy to bolt direclty to the trailer fame with the back skirt, which is not shown in the photo.
MY OLD FENDER CRACKED AND BROKE THIS REPLACED IT WITHOUT CHANGING THE MOUNTING BRACKETS I AM VERY SATISFIED
Ordered product for a boat trailer it fit perfectly and does exactly what it's supposed to the shipping was fast and I was kept up to date on where it was I'm a very happy customer
Good product, fits well into the factory location.
Little bit of lines / splotchy look from when it was molded but otherwise good product. Definitely n improvement from the broken one that was on it
Purchased a PWC trailer fender. The fender was a perfect fit. It was delivered on time and customer service was excellent.
My ski trailers dat out a while when the skis were in the lifts and these made them look brand new. Exact fit from previous
Just what I needed
The fender matched exactly what I needed and arrived quickly. 2004 Triton single bunk trailer for a sea doo.
fenders fit perfectly..had to drill holes to match fender plate on my trailer.. attached very easily.. would reccommend
the fenders are well made and were easy to install
Hard to find this part anywhere.
Glad I found Etrailer.
Parts arrived quickly.
thanks for the quick ship
Jay
8/30/2017
cracking I should have bought steel
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Toddieb
2/8/2019
Held up nice