You've got an old-school trailer that's still built better than most new ones out there, and you plan to keep it that way. This steel fender keeps that classic look, can be painted to match your rig, and it takes the abuse of rocks and salt.
You can weld the fenders to your trailer for a permanent setup that won't move or loosen over time. If you don't have a way to weld, bolt them on with brackets instead. That setup gets the job done without any welding gear and still gives you a strong, secure fit. Bolting also makes repairs and paint touch-ups easier later on.
You must prime and paint the fender to prevent rust and extend its lifespan.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a quick look at this etrailer Single Axle Trailer Fender. Now, this is designed for your single axle trailers with 14-inch in diameter wheels. And let me go ahead and, before we go any further, give you some measurements of this fender just so you can know right up front if this is going to work for you or not. So looking at the overall length from end to end, we're sitting right at 29 inches wide.
If I said length, I meant width, 29 inches wide. And then looking at the depth, if I can set that up there so you can see, looks like we're sitting right at about 9 inches deep. Now, putting this back up here, lining that up there to my frame, looking at the overall height, right about 7 1/2 inches tall or so, maybe slightly higher than that, a little bit under 8. And this is gonna weigh a little over 6 pounds. So this curved fender is going to cover one tire on your single axle trailer and act as a splash guard, keeping road debris from hitting other vehicles and helping to protect your trailer's cargo.
This features a sturdy 16-gauge cold rolled steel construction. And this can be primed and then painted to provide resistance to corrosion and to match your trailer's paint finish. This will be a bolt-on or weld-on application, but this does not include any brackets or hardware. It's not pre-drilled, so you would have to take care of those things yourself. If you are looking for brackets, you can take a look at the related product section on this product page to find the brackets that are going to work best for you.
But if you happen to have any other additional questions, whether it's about this fender or any of the other items that we carry here at etrailer.com, don't hesitate to reach back out. We ultimately wanna make sure that you're getting exactly what you want and need. That's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
looks great
Very fast service
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.