To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
A wide driveway means more trips back and forth shoveling or plowing after a snowfall. This complete Plowser snow plow includes the 78" folding blade and two 6" extensions, giving you a 90" clearing path so you can finish faster.
After an ordinary snowfall, a longer or wider driveway can mean a lot of trips back and forth. This Plowser starts with the same 78" residential blade, but the two included 6" extensions give you a 90" clearing path. That extra foot covers more driveway with each straight pass and can mean fewer passes to finish the job. It attaches to a compatible front or rear hitch on a car, SUV, pickup, or other suitable vehicle and is intended for residential snowfalls up to 8" deep, not commercial lots or frozen piles left by a street plow. For narrower spaces, remove the extensions and return to the 78" blade.
The Plowser is designed for a 15" hitch height, but that doesn't mean your vehicle's receiver must be exactly 15" off the ground. The included rise/drop hitch adjusts the connection to accommodate receiver heights from 11" to 19". Measure from the ground to the center of your receiver opening before ordering. The pivoting connection also allows the blade to move up and down with changes in your driveway's slope, helping it maintain contact with the surface.
Should you need a longer drop/rise hitch, for a lifted vehicle for example, we offer a large assortment here at etrailer (sold separately).
The lower UHMW plastic cutting edge is hinged and spring loaded. This spring-loaded cutting edge (trip edge) tips backward when it catches a small seam or raised spot, while the main blade stays upright. Its plastic contact surface is gentler on pavers and decorative concrete than a steel edge, although any plow can pick up loose gravel or mark a surface under some conditions. It is not intended for grass or rough, uneven ground.
The Plowser attaches to your existing 2" receiver without powered equipment. Bolt the two included 6" extensions onto the sides of the base blade for the full 90" width. Insert the included rise/drop hitch into your receiver and fasten it with a hitch pin (sold separately, if you don't already have one). Unfold the plow, secure the center lock bar with the included hinge pins, and connect it to the rise/drop hitch with the included pin. With a front mount, drive forward to push snow; with a rear mount, back straight down the driveway. The blade stays pointed straight ahead rather than angling left or right. There is no powered lifting or angling system, wiring, or hydraulics to connect. Keep the vehicle straight during a plowing pass rather than turning to push snow sideways.
When you've cleared the driveway, the plow folds in half for storage in a garage or shed, and its nylon carry straps help you move it after removing it from the vehicle. The bolt-on extensions can be removed when you need the narrower blade or want to store the parts separately.
Before the first snowfall, make sure your vehicle has suitable traction, a compatible 2" receiver hitch at the proper height, and any additional hitch hardware you need. Once everything is connected, unfold the blade and secure the center lock bar. With a front-mounted plow, drive forward to clear snow. With a rear-mounted plow, back down your driveway.
The Plowser is intended for residential snow clearing, so it's best to tackle snowfall before it becomes densely packed. Drive slowly and make straight passes rather than turning to push snow sideways, which can cause your vehicle to fishtail. This plow isn't intended for commercial jobs, public roads, grass, rough uneven ground, or pushing through hardened snow and ice.
Ratings & Reviews
Do you have a question about this Snow Plow?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.