Trailer Wiring Harness that Fits 2025 Ford Bronco Sport Big Bend

Question

Question:

I have a 2025 Bronco Sport Big Bend which Curt hitch and wiring harness do need for this vehicle

asked by: Jeff F

0

Expert Reply:

Hey Jeff, I hope we get hitch fits soon for the 2025 Ford Bronco Sport Big Bend but at this time we are still waiting. For trailer wiring though we know the Curt # C47WR is a fit.

expert reply by: Jameson C

0

Jeff F.

6/4/2025

Thanks let me know me know as soon as you get one in.

Jameson C.

6/4/2025

@JeffF I'll keep an eye out but if you but me on this thread ever few weeks or so I will check and let you know.

Answer 1

Hey Jeff! The Curt T-Connector Vehicle Wiring Harness #C47WR does not require the tow package or any kind of programming on the 2021 Ford Bronco Sport. The wiring harness plugs into your tail lights and operates independently so it won't be tied…

view full answer...

Answer 2

There are 2 T-connector wiring harnesses for your 2017 Ford Escape, parts #HM40524 and #C56320. Basically, they serve the same purpose but are made by different companies. Part #HM40524 is made by Hopkins and #C56320 is made by Curt. Between them…

view full answer...

Answer 3

Curt has their wiring harness part #C56320 as a fit for the 2017 Ford Escape SE so it does fit for sure.

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness #C47WR is the same as the 56462. You were looking at wiring harnesses for the 2023 Ford Bronco which are different than the one for the Bronco Sport. This wiring harness works no matter what taillights you…

view full answer...

Answer 5

The absolute best trailer hitch for your 2024 Ford Bronco Sport is the etrailer Trailer Hitch Receiver #e57KR because of the matte black finish. This not only looks better, but is also more durable than the classic glossy black finish that we see on…

view full answer...

Answer 6

The best hitch for a 2024 Ford Bronco Sport is the etrailer item #e57KR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Wiring Harness that Fits 2025 Ford Bronco Sport Big Bend

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching