Picking Out Andersen Weight Distribution System And Adjusting It For A Level Truck And Trailer

Question

Question:

I noticed my trailer is pretty level, but the truck is not completely level. The sway does seem to be better though. Is this correct for the Andersen?

asked by: Michelle

0

Expert Reply:

Hey there Michelle!
While weight distribution systems are supposed to get the truck and trailer as level as possible, they are not complete miracle workers and won't make both 100% level in all situations. In fact, Andersen has a section of the instructions where they go over this exact topic as you can see in the image below. Basically it says that it's okay if the rear of the tow vehicle is slightly sagging and the trailer is level, just make sure the sag is not dramatic.

One thing we can check is if you have the correct system for your vehicle and trailer, and if you have the hitch adjusted properly and on the correct rise/drop setting. I attached another snip it from the instructions that covers the adjustments.

As far as the correct system goes, you'll want to make sure your trailer's tongue weight and overall weight falls in the range of one of the systems below, and also match up the rise/drop with your trailer and tow vehicle's receiver to get them as level as possible before adjustments.

-Andersen 10K GTW, 1.4K TW with 4" Rise/Drop # AN88VR (2" Receiver)
-Andersen 10K GTW, 1.4K TW with 6" Rise/Drop # AN28VR (2" Receiver)
-Andersen 14K GTW, 1.4K TW with 4" Rise/Drop #AN53VR (2" Receiver)
-Andersen 16K GTW, 1.6K TW with 6" Rise/Drop # AN33VR (2" Receiver)
-Andersen 14K GTW, 1.4K TW with 6" Rise/Drop # AN69VR (2-1/2" Receiver)

expert reply by: Andrew N

0

Andersen adjustment guide
(click to enlarge)

Andersen level guide
(click to enlarge)

Answer 1

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 2

Hi Doug! If you were just needing a weight distribution system for the sway control, I would have said the Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW #AN53VR could be a good option. However, I have tried…

view full answer...

Answer 3

Good morning Hurley (cool name by the way. I like the clothing brand Hurley). Also, congrats on the new-to-you Chevy! That is an excellent question that comes up from time to time on various vehicles and weight distribution systems. So on your 2023…

view full answer...

Answer 4

Nicki, that is an excellent question that we've gotten before. The Andersen weight distribution hitches work in a totally different way from competitors which allows it to remain lightweight, not bulky, and easy to install or remove. The chains…

view full answer...

Answer 5

Yes, it will Jim. The Andersen Weight Distribution Hitch w Sway Control item #AN28VR includes a shank with a 6" rise. This will put the top of the hitch ball 6" above the top of your receiver, which will be perfect for your trailers coupler…

view full answer...

Answer 6

Hey Dan, I attached a picture that has all of the dimensions of a similar shank that comes with the Andersen Weight Distribution System part #AN28VR that you referenced. Let me know if you will have enough clearance, are you running your current…

view full answer...

Answer 7

Good afternoon Drake! Yes you are in luck, because the Andersen Weight Distribution Hitches, like a lot of modern ones, do allow you to reverse while hooked up to your trailer. The reason this can, and some can't, comes down to if it uses certain…

view full answer...

Answer 8

Hey Chris, normally I am not one to recommend the Andersen weight distribution systems because they don't work awesome at higher tongue weights but based on the towing capacity of your 2025 Hyundai Palisade and fact you want a lighter weight…

view full answer...

Answer 9

Hi Barney! I have the six hitches we have available for your 2019 Toyota Highlander listed below with their corresponding weights: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98844 - 43.68 pounds…

view full answer...

Answer 10

I recommend the Fastway e2 Weight Distribution System part #FA92-00-0600 with 2" Hitch Ball part #A-90 for a Forest River Rockwood Geo Pro 15TB. In regards to using a weight distribution system, the rule of 10-15% for tongue load will still…

view full answer...

Answer 11

The reason you are having trouble finding replacement tires for your Forest River Rockwood Geo Pro G19FD is because the ST235/75-15 tires it has is a very uncommon size that only a few trailer tire manufacturers produce. The closest size we have to…

view full answer...

Answer 12

Hey Scott, thanks for reaching out! Your 8K Furrion AC Unit is too small for a heat strip to fit, unfortunately. I confirmed with my contact at Furrion that there aren't any other options for your system either. If you were to upgrade to a 13.5K…

view full answer...

Picking Out Andersen Weight Distribution System And Adjusting It For A Level Truck And Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching