bing tracking image
Q & A Icon

How to Connect Redarc Tow-Pro Liberty on 2022 Jeep Grand Cherokee Without Tow Package  

Updated 12/03/2024 | Published 12/02/2024

Question:

My 2022 Jeep Grand Cherokee Limited WK - old body does not have a tow package. There is no brake controller connector located under the dash, behind the hood release, on top of the large plug. I have looked all around behind the dash, and it is not there. How do I locate and connect to the brake signal wire if there is no brake controller connector?

0

Expert Reply:

Hi Andrew; there won't be a factory tow port since you don't have the tow package. The # RED69FR wiring harness you ordered splices in for the installation of the # RED24FR. It will be very similar to the installation video I attached below which includes the # ETBC7 you ordered. The blue brake output wire will connect to the wiring from the # ETBC7, the black wire is power, the white is ground, and the red connects to the cold side of the stoplight switch on your Jeep.

expert reply by:
0
Robin H
Andrew P. profile picture

Andrew P.

12/3/2024

Yes. How do I find the cold side of the stoplight switch? Is the stoplight the light in the rear window?

Robin H. profile picture
Etrailer Expert

Robin H.

12/3/2024

@AndrewP normally it would be under the dash like the rest of the wiring but looking into it a little further it is unusable on your Jeep. You will need to install the Roadmaster Stop Light Switch Kit # RM-751449 which will act as the stoplight switch and then connect your red wire to this kit.
Andrew profile picture

Andrew

12/3/2024

@RobinH Thank you! I had come to this conclusion, and I have that part in my shopping cart! You guys are amazing! Thanks for the quick answers!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>