Is There A Redarc Plug and Play Adapter for a 2023 Jeep Grand Cherokee

Question

Question:

I’m trying to find the correct custom fit Redarc trailer brake controller wiring harness on your site that is the Redarc TPH-004 part number. Some of your harnesses have the manufacturer’s TPH-xxx PN and some just have the etrailer item#. I believe the etrailer part I need is the Item# RED77FR. Can you confirm this is the Redarc TPH-004? Also, I have confirmation from Redarc that the TPH-004 does fit my 2023 Jeep Grand Cherokee. The RED77FR says not confirmed to fit. Thanks.

asked by: Randy H

0

Expert Reply:

So the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED77FR is the same thing as TPH-004, but it's not compatible with your vehicle. Redarc does also state this on their website so I'm not sure who you spoke with at Redarc but they aren't correct.

That harness would've worked with the 2011-2020 Jeep Grand Cherokee's so maybe they misheard you, but, with that being said, there unfortunately are no plug and play harnesses for your Jeep. So, in order to install the Redarc Tow-Pro Elite Brake Controller # RED44FR you'd just have to use the included universal harness.

expert reply by: Bryce D

0

Answer 1

Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…

view full answer...

Answer 2

If your 2023 Jeep Grand Cherokee L does not have wiring you will need to add it to use a brake controller. The first thing you need is the T-One Vehicle Wiring Harness #TK39VR for a 4-way. From there, you need the Universal Installation Kit for…

view full answer...

Answer 3

Hi Andrew; there won't be a factory tow port since you don't have the tow package. The #RED69FR wiring harness you ordered splices in for the installation of the #RED24FR. It will be very similar to the installation video I attached below…

view full answer...

Answer 4

Hey, Kevin. I'm really sorry to hear that you're having so many issues with the other style of mirrors. There is a clamp on mirror, part #CM11980. It will clamp on the outer shell of the mirrors. I included some pics of how the are supposed…

view full answer...

Answer 5

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 6

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Is There A Redarc Plug and Play Adapter for a 2023 Jeep Grand Cherokee

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching