See what our Experts say about this MORryde Trailer Suspension Parts

• How to Determine Correct Equalizer Upgrade For Triple Axle Toy Hauler
  Hey Scott, While we don't have a way of knowing which equalizers are on your triple axle Attitude toy hauler, we can help you figure out the right ones to upgrade your suspension. It's pretty simple, as all you have to do is measure your equalizer from center-to-center of the bolt holes horizontally, as well as the height from the middle of the equalizer to the center of the top bolt hole. For example, if you measured your equalizer and it was 7-3/4" long and 2-7/8" tall you could use...
  view full answer...
• How To Choose Correct MORryde Shackle Upgrade Kit
  In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part # MR86ZR or if you have 3-1/8" long shackle straps you can use part # MR26ZR. These are the two most popular sizes.
  view full answer...
• Looking For Wet Bolt Suspension Upgrade Kit For 2022 Dutchmen Voltage Toy Hauler
  Hey Justin, thanks for reaching out. Sounds like you are on the right track, and I can definitely help make sure you get the right thing. The MORryde Suspension Upgrade Kit # MR86ZR you were looking at comes with 2-1/4" long shackles. The bolts are standard size so all you'll need to do it make sure the stock shackles are also 2-1/4" long hole-to-hole. As long as that dimension matches, you can be sure the kit will work for you. The MORryde kits are great. The wet bolts and HD shackles...
  view full answer...
• Recommended Heavy Duty Shackle Kit For 2004 Raptor Triple Axle Camper
  Hey Bob, Shackle Straps are measured center to center, so for your 2004 Raptor Triple Axle you'll want an upgrade kit with 2-1/4" Shackles. I'd go with the MORryde # MR86ZR. These include super beefy 1/2" thick shackle straps which are not going to wear out like the flimsy stock ones. These will also require you to use the included wet bolts and bronze bushings, so you'll have to remove your worn out nylon bushings in you equalizers and leaf springs. Make sure you check out the openings...
  view full answer...
• Replacement Leaf Springs and Shackles for 2012 Eclipse Attitude Toy Hauler
  Hey Mordechai! I can help you find replacement leaf springs and shackles but you will have to get some measurements. For the leaf springs you either need to measure the flat length or get the spring eye to spring eye measurement. Both of these are explained in the article linked further down on this page. For example, if you find that the eye to eye measurement is 25-1/4" (accounting for it flattening over time) you can use the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4"...
  view full answer...
• What Leaf Springs, U-Bolt Kit, Equalizers, and Wet Bolt Kit do I Need for My Triple Axle Set-Up?
  Hello Mike, Thank you so much for the detailed information, most helpful! For the leaf springs, you will want to go with (6) of the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR. Since you have 7K axles, these are the correct match, as each spring is rated for 3,500 lbs. That pairing is exactly what you want for proper suspension performance. While it might seem like stepping up to a 4,000 lb spring would be an upgrade, it actually makes the suspension too...
  view full answer...
• Can I Get MORryde Suspension Upgrade Kit MR86ZR With Two Extra Sets Of Shackle Straps?
  Hey Marcus, thanks for reaching out. So, the MORryde Suspension Upgrade Kit for Triple Axle Trailers # MR86ZR is meant to be used with the MORryde CRE3000 equalizer kit which only uses 6 sets of shackle straps instead of 8. There isn't a kit that comes with 2 more sets of shackles so that leaves you with two options. You can upgrade your equalizer to the CRE3000, part # MR59ZR (33" wheelbase) part # MR39ZR (35" wheelbase). That way the # MR86ZR will have the correct quantity of shackles. That...
  view full answer...
• Replacement Bushing Kit for CRE3000 MORryde Rubber Equalizers
  Hey Seth to replace just the bushings on CRE3000 MORryde Rubber Equalizers like item # MR87ZR, you'll want the Dexter Bronze Bushings item # K71-291-00. If you're swapping out the bushings you'll need to take out the wet bolts. These four wet bolts will need to be replaced because they can only be torqued down once and at that point you might as well replace all of the bushings and wet bolts. I saw you were looking at the MORryde Suspension Upgrade Kit for Triple Axle Trailers item #...
  view full answer...
• Replacement Leaf Spring for a Dexter 072-079-01 Leaf Spring
  Hey Joe, thanks for the information! To replace your Dexter 072-079-01 leaf springs, I recommend the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles item # EM28AJ. This is a 4,000 lbs leaf spring designed for 8,000 lbs axles. It's got 7-leafs and measures 24-7/8" from the mounting holes. The Emco item # EM28AJ is made in the USA. It's constructed of high carbon steel, which provides great shock absorption. They include nylon bushings which last longer and reduced noise. This leaf...
  view full answer...
• Looking For A Replacement Wet Bolt Kit For My Triple Axle Trailer
  Hey Don, We do have just that, MORyde has a full kit with everything for your triple axle trailer # MR86ZR. That will replace all wet bolts, bushings and shackle straps. How are you liking the CRE3000?
  view full answer...
• What is Actual Difference Between MORryde Suspension Upgrade Kit for Correct Track and Stock Hanger
  Hey Kyle, this is a great question but the difference is the bolt length for the ones that connect to the hangers because the Correct Track brackets add thickness. You can see the difference in the two pictures I attached. Note how much more bolt is on either side of the bushing on the black bolt which is the kit for the Correct Track part # MR38ZR.
  view full answer...
• Galvanized Idler Hub That Fits Square #84 Spindle
  Let's start with the spindle and hub you asked about, and they are indeed compatible. Reason why is this spindle accepts hubs with inner bearing L68149 and outer bearing L44649, which is exactly what the Easy Grease hub you mentioned uses, so the two will work together: - Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K And as for the hanger kit and leaf springs you mentioned,...
  view full answer...
• How to Figure Out Replacement Shackle Straps and Wet Bolts for Trailer
  Hey James, thanks for reaching out! What's the length of your shackle straps from center hole to center hole, and what's the diameter and length of your bolts? I wish I knew what it was based off the information you gave me, but unfortunately I don't. Let me know what you find and I'll help you find the kit that works for your trailer!
  view full answer...
• Do You Have A Heavy Duty Shackle Kit For My Trailer? Need Bushings And Bolts As Well
  Hey Dan, MORyde makes a great shackle upgrade kit with those 1/2" thick shackle straps and the included brass bushings and wet bolts. If you have a tandem axle trailer you will want to go with part # MR46ZR, and if your trailer is a triple axle trailer we have part # MR86ZR. This is a full kit that will replace every bolt, bushing and shackle strap needed for your trailer. Chances are your original straps are a little worn out so they are measuring bigger then the standard 2 1/4" long...
  view full answer...
• Recommended Equalizer Upgrade for a Triple Axle Trailer
  Hey Zack I don't have a database that shows me what wheel base your 2016 Genesis Supreme Toy Hauler has but it's pretty easy to find out. You'll just want to measure from the center of one of the wheels to the center of the next wheel. I do have a couple of equalizer sets that will be a solid upgrade though. The first one works with trailer's that have a 33" wheelbase. It is the MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The second one works...
  view full answer...
• Replacement MORryde CRE3000 Equalizer, Wet Bolts, and X-Factor Crossmember for a Triple Axle Trailer
  Hey Lance, welcome back! To replace your equalizers and shackles, I am going to need you to take a couple of measurements because I have no way of knowing what size the ones on your Heartland Cyclone are and we've got two options for both. To the replace your MORryde CRE3000 equalizers, you'll need one of the following options: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The left and right mounting bolts on the main equalizer will be 6-1/2" apart...
  view full answer...
• What Is The Best Shackle, And Wet Bolt Kit For My 2025 Triple Axle Brinkley?
  Hey Danny, We do have a full wet bolt kit with bolts, bushings and shackle straps for your triple axle trailer. I recommend the MORyde # MR86ZR for your setup. This comes with the same 2-1/4" heavy duty shackle straps that you mentioned. The shackle straps are thicker than the standard out there for long lasting use. This kit comes with everything you need and is going to be a great upgrade for your trailer. How are the leaf springs on your trailer?
  view full answer...
• Replacement Leaf Springs, Equalizers, and Wet Bolt Kit for a Triple Axle Trailer
  Hey Jeremy. I have all of the parts you'll need but I am going to need you to take a couple of measurements. There's no database that shows me what parts you have on your toy hauler. To replace your springs, I'll need you to jack up one side of the trailer(or both) and get the bolt hole to bolt measurement off of one of your leaf springs. They tend to stretch out over years of use and this is the only accurate way, other than a part number, to find out what size you need. I'll also need...
  view full answer...
• WIll MORryde Rubber Suspension Upgrade for Triple Axle Trailers Fit 2019 Grand Design Momentum 395M
  Hi Michelle; the MORryde Rubber Suspension Upgrade for Triple Axle Trailers # MR77ZR will fit as long as you have 35" axle spacing on your 2019 Grand Design Momentum 395M. If you have 33" you need the # MR67ZR instead. I was able to determine that you have 2-1/4" long shackle straps so if you want to upgrade to heavy duty shackles and wet bolts while you're at it you can use the # MR86ZR.
  view full answer...
• Troubleshooting Equalizers Rock Forward When Trailer Sitting Level and Leaf Springs Touch Frame
  Hi Colton; are you replacing the leaf springs as well? Is that what you mean when you say you have 4 springs 25-1/4"ish for front and rear and 26" for the rear? Replacing the equalizers isn't a bad idea while you're working on this but I don't see that being the main issue. It sounds like your leaf springs are completely worn out which is throwing everything off while allowing them to contact the trailer frame. Replacing them will likely solve your problems. Unless you have changed the...
  view full answer...
• Replacement Leaf Springs and Equalizers for a 2006 Wolfpack WP295
  Hey Jay. We definitely have everything you need, but I am going to need a couple measurements. I do not have a database that lets me look up your spring size and capacity or the dimensions of your equalizers. The only way to find the right replacement springs are to measure one of your current ones. You will want to take a measurement from the center of the spring eye to the center pin on the leaf spring along the curve( measurement B in that attached image). This measurement will be...
  view full answer...
• Wet Bolt Kit for 2020 Grand Design Momentum 376THS
  Hey Joshua! I'm assuming you want one of the MORryde kits since that is what you were looking at. I looked up your 2020 Grand Design Momentum 376THS and found that you have 2-1/4" shackle straps. Based on that you need the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR. If you need anything else don't hesitate to reach out in the comments below.
  view full answer...
• MORryde Wet Bolt Upgrade Kit for a 2022 Keystone Fuzion 419 Triple Axle 5th Wheel
  Hey Chris, great to hear from you! There are only 2 kits for a triple axle trailer; the one with 2-1/4" Shackles # MR86ZR, and the one with 3-1/8" Shackles # MR26ZR. These will work with your MORryde CRE3000 system, you'll just have to verify which length shackles you have. I unfortunately don't have a list of what came on your trailer, but since you have it at a shop right now you should be able to call them and they can take this measurement for you.
  view full answer...
• Recommended Cushioned Equalizer & Wet Bolt Shackle Kit For 2020 Coachmen Chaparral 336TSIK 5TH Wheel
  I recommend going with the MORryde AllTrek 4000 Equalizers # MR29DR over the Lippert Road Armor # LC696740 on your 2020 Coachmen Chaparral 33TSIK. With the Road Armor bolts only spread 6" on center and your current leaf spring sitting relatively flat I worry going to the shorter equalizer may cause the shackle to flip on the equalizer more easily. You will want to use the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" # MR86ZR with the new equalizer. This will give you...
  view full answer...
  

Do you have a question about this Trailer Suspension Part?